A04_SOW_Revised_0001.docx

Statement of Work

Custom Steel Posts The purpose of the steel fence posts is to provide a public access barrier along a main access road leading into a campground. The posts are designed with a carriage feature that will hold wooden rails (see pic). The steel fence posts are needed to provide a rigid structure to the overall fence and greatly extend maintenance intervals of the posts. The Corten specification is needed to provide a weathered, rustic, rusty appearance within the campground.

1) 315 total - completed steel (Corten) fence posts

2) Requirements

a. Cut, drill, and punch metals cleanly and accurately. Remove burrs and ease edges to a radius of approximately 1/32 inch (1 mm). remove sharp or rough areas on exposed surfaces.

b. Welded Connections:

i. Comply with AWS D.1-D1.1M for tolerances, appearances, welding procedure specifications, weld quality, and methods used in correcting welding work.

ii. Use materials and methods that minimize distortion and develop strength and corrosion resistance of base metals.

iii. Obtain fusion without undercut or overlap.

iv. Remove flux immediately.

v. At exposed connections, finish exposed surfaces smooth and blended, so no roughness shows after finishing and welded surface matches contours of adjoining surfaces.

c. TS 4” X 4” X ¼” by 72“L

i. steel thickness is ¼ inch (6.35 mm)

d. All steel to be produced, manufactured in United States

e. Each post includes ¼” steel cap and ¼ inch steel U-shaped bracket

f. See drawing for specific details including drilled holes

g. Related hardware is excluded from this PR

3) Period of performance:

a. October 1, 2022, through April 28, 2023

4) Deliver to following address:

United States Department of the Interior Bureau of Land Management 5665 Morgan Mill Road Carson City, NV 89701 image1.jpeg