A06 Specifications_0001.docx

Salient Characteristics S20142

REMOTE CONTROLLED BOATS

SALIENT CHARACTERISTICS:

1 EA, Portable Remote-Control Survey Boat with Thruster Actuator Upgrade:

1. Shall be a portable, remote controlled, electric boat.

2. Shall have survey speed of at least 2 kn.

3. Shall have top speed of at least 6 kn.

4. Shall have hull length no larger than 116 cm / 45.6 in and width no larger than 21cm / 8.2 in.

5. Shall have battery endurance up to 8 hours at survey speed.

6. Shall have payload no less than 35 lbs / 15 kg.

7. Shall run on two (2) 14.8 vdc 16 Ah battery LiPo.

8. Shall have two (2) 120-amp electronic controller unit.

9. Shall have at least two (2) brushless thruster motors.

10. Shall be made of UV resistant High Density Polyethylene hull and aluminum powder coated frame.

11. Shall have differential thrust steering.

12. Shall have four (4) watertight closure hatches.

13. Shall have remote control with 2.4 GHz long range capable of remote range up to at least 2 km.

14. Shall have two (2) 1.2m catamaran pontoon hulls cross frame.

15. Shall have two (2) 12V DC shrouded thrusters on individual actuators.

16. Shall include battery charger and custom-fit portable shipping case.

17. Shall have 12-month limited factory warranty and lifetime technical support.

1 EA, Autonomous upgrade:

18. Shall be compatible with both portable remote-control survey boat, above.

19. Shall include auto navigation module and RF telemetry kit, laptop, and software.

20. Shall include embedded GPS and compass.

21. Shall be no larger than 28x16x11in and weigh no more 15lbs.

22. Shall have 12-month limited factory warranty and lifetime technical.

1 EA, Mounting Plate:

23. Shall be customized, removable ADCP mounting plate for Remote-Control Survey Boat listed above thru-hull mounting system,

24. Shall include installation, integration, and hardware.

4 EA, Thruster Batteries:

25. Shall be 14.4volt 16,000 mAh.

26. Shall be compatible with the Remote-Control Survey Boat listed above.

1 EA, Remote-Control Survey Boat- ASV Spares Kit:

27. Shall be compatible with Remote-Control Survey Boat listed above.

28. Shall include at least one (1) thruster, two (2) stabilizer fins, one (1) speed controller assembly, two (2) hatches, one (1) battery cables and connectors set, two (2) receivers, one (1) thruster kit (motor, nozzle, two (2) props), four (4) XT90 connector, one (1) set frame hardware, two (2) weed guards with screws, one (1) Set AutoNav Cable assembly, and one (1) RF Telemetry kit.