B09 Amendment 0001 Specifications_0001.docx

Salient Characteristics S20112

GNSS RECEIVER AND ACCESSORIES

1 EA, GNSS Receiver:

1. Must be compatible with existing owned Trimble R8 receiver with same user interface.

2. Shall have Bluetooth, integrated with fully sealed 2.4 GHz communications port.

3. Shall have at least 6 GB internal memory.

4. Shall have a vibration standard of at least MIL-STD-810F.

5. Shall be Wi-Fi capable with encryption.

6. Shall be designed to survive less than 6 ft drop.

7. Shall have case that is IP67 rated or better.

8. Shall have 7-pin, lemo-type 3-wire serial connector.

9. Shall be compatible with CenterPoint RTX, OmniSTAR HP, XP, G2, and VBS positioning or equivalent.

10. Shall be capable of level and tilt compensation.

11. Shall be capable of 360 GNSS tracking.

12. Shall allow for satellite signals tracked simultaneously: GPS, GLONASS, Galileo, BEIDOU COMPASS.

13. Shall allow for satellite or internet delivered corrections.

14. Shall have GNSS chips with minimum of 672 channels.

15. Shall have integrated, 3.5 G modem.

16. Shall have radio modem that is sealed 450 MHz with frequency range of 403 MHz to 473 MHz.

17. Shall have radio range of 3 to 5 km typical.

18. Shall use rechargeable, removable 7.4 V, 3.7 Ah Lithium-ion battery.

1 EA, Base and Rover Mode Configuration:

19. Shall be compatible with GNSS Receiver above.

1 EA, Receiver Accessory:

20. Shall be compatible with receiver above.

21. Shall include power supply and dual battery charger power cord.

1 EA, Controller for GNSS Receiver:

22. Shall operate for at least 5 hrs on one charge.

23. Shall weigh no more than 3.5 lb.

24. Shall run on rechargeable batteries.

25. Shall have speaker and microphone.

26. Shall be compatible with GNSS Receiver above.

27. Shall have backlight keyboard with QWERTY type key arrangement.

28. Shall have charger/dc power-in, USB, and serial RS232.

29. Shall have display that is at least 7”, 1280 x 800 landscape, sunlight readable, LED backlit, and multitouch modes.

30. Shall have front camera with 2 MP fixed-focus or better.

31. Shall have integrated 3-axis accelerometer, magnetic, ambient light, and proximity sensor.

32. Shall have integrated GNSS with L1, GPS, GLONASS, and BeiDou.

33. Shall have rear camera with at least 8 MP autofocus and flash.

34. Shall have at least 8 GB RAM and 64 GB for storage.

35. Shall run Windows 10.

36. Shall have 64-bit quad-core processor.

37. Shall have 3.5 mm mini-jack connection.

38. Shall be WIFI and Bluetooth capable.

39. Shall be AT&T and Verizon certified.

40. Shall allow for MicroSIM card.

41. Shall allow for expansion with SDXC card.

1 EA, Software:

42. Shall be used with the controller specs above.

43. Shall allow user to collect, share, and deliver data information in the field.

1 EA, Controller Pole Mount:

44. Shall connect controller above to a pole.

1 EA, Controller Accessories:

45. Shall be compatible with controller above.

46. Shall include external battery charger with power cord and one set of two (2) batteries.

1 EA, Bipod:

47. Shall be compatible with receiver above.

48. Shall be at least 2.0 meters long.

49. Shall be made of lightweight materials such as carbon fiber and aluminum.

50. Shall include a carrying bag.

1 EA, Extension:

51. Shall be compatible with receiver above.

52. Shall be made of lightweight material such as carbon fiber with 5/8 x 11 male threads.

53. Shall be at least .25 meters long and 1.25-inch diameter.

1 EA, Radio Antenna Mounting Pole Kit:

54. Shall be compatible with antenna below.

55. Shall include an extendable pole that is at least 1.8 meters long.

56. Shall include a mounting disc.

1 EA, Antenna Whip:

57. Shall be compatible with receiver above.

58. Shall have 410-430 MHz frequency range.

59. Shall have at least 5dB gain.