Attachment_1_-_SOW.pdf

STATEMENT OF WORK FOR AN ONSITE BRIVO PAM FIRMWARE MAINTENANCE & SUPPORT, PIVclass CERTIFICATE MANAGER, pivCLASS READER SERVICES, pivCLASS REGISTRATION ENGINE AND OTHER

SERVER SUPPORT PRODUCTS AS LISTED BELOW

Background:

In 2014 the Leetown Science Center (LSC) opted to obtain a new building security system. It required design and installation of a single Intrusion Detection System (IDS), HSPD-12/FIPS 201-2 compliant

Physical Access Control System, and CCTV System that included entry with government Identification cards, camera at key entry points both at outside entrances and later additions to certain interior doors as well. The successful bidder was also responsible for coordinating this installation, local hardware installation, programming, communications, training, and testing of the system with the USGS components operating and maintaining the system in Denver, CO (appliance location). Unfortunately, over time it was determined this was not optimal and the LSC has been informed it is preferable that rather than running the system through Denver, it would be better off having an onsite (Kearneysville, WV) server. A bid was awarded for server installation and it has been installed. After installation, it was determined that standalone Physical Access Control System (PACS) licenses, certificates etc. cannot be shared. Therefore, LSC must acquire the PIV Class certificate manager (software) pivCLASS reader services, pivCLASS registration engine, maintenance and support and other associated training and technical support.

Requirements:

Contractor shall provide the following licenses, services etc. according to the part numbers highlighted below in bold font:

HID-91000-MS PAM Firmware Maintenance & Support PAM firmware maintenance and support, annual fee (per unit), first year included with purchase. 8 am to 5 pm Central Time Monday through

Friday. There is only one unit.

HID-PVC-CM pivCLASS Certificate Manager Includes software only. One license per PACS (LSC has only one PACS).

HID-PVC-CM-MS Certificate Manager Maintenance & Support Annual subscription service. First year included with purchase. 8 am to 5 pm Central Time Monday through Friday.

HID-PVC-FXRDR pivCLASS Reader Services Includes software and supporting documentation. One required per site using PAM modules (LSC is one site).

HID-PVC-FXRDR-MS Reader Services Maintenance & Support Annual subscription service. First year included with purchase. 8 am to 5 pm Central Time Monday through Friday.

HID-PVCP-D/S-03-00 pivCLASS Registration Engine Only for Brivo Onsite Server Includes software that interfaces with Brivo Onsite Server and supporting documentation. One license per work station needed and LSC has just one. Requires a USB contact reader (OMNIKEY 3121 recommended) and biometric sensor (MSO-1300e recommended). Note: The Registration Engine requires pivCLASS Certificate

Manager for Brivo Onsite Server.

HID-PVCP-D/S-MS Registration Engine Maintenance & Support Annual subscription service. First year included with purchase. 8 am to 5 pm Central Time Monday through Friday.

B-PRO-AP-TRN-START Brivo Onsite Server Administrator Training: Online training session for the new

Brivo Onsite Server Master Administrator. Includes orientation to the capabilities of Brivo Onsite Server as well as assistance setting up standard functions such as Users, Groups, Reports, Schedules and

Administrators. This service has a duration of three (3) hours.

B-PRO-REM-TECH-HR Brivo Online Technical Support: Per hour - Technical Support assistance delivered remotely

B-PRO-SITE-TRN-DAY Brivo On-Premise Training: Per Day - Customized training delivered on site

Site Locations and Contacts:

1. The location of the work site is at the US Geological Survey, 11649 Leetown Road, Kearneysville, WV, 25430.

2. Work may take place during normal business hours, Monday through Friday, 7:30 a.m. to 5:00 p.m.

3. The USGS Technical Liaison and On-Site Contact will be identified in the purchase order.