REVISED_SPECS_Marsh_Master_FIREFIGHTING_EQUIP_Fixed_0001.docx

SPECIFICATIONS FOR AMPHIBIOUS FIREFIGHTING TRACKED VEHICLE

REVISED 08-19-2022

REVISIONS/ADDITIONS HIGHLIGHTED

BODY:

· 15' 10" Long x 8’-0” Wide x 7’10” High

· All Welded 1/8” Aluminum Body with 3/16” High Strength Bottom

· 6300 LB (approx.) Vehicle (Dry Weight without Cutter)

· 2000lb Floating Load Capacity

· Overhead Rack/Brush guard, and Windshield

· Full walking deck the width of the tracks

· 33.5” Ground Clearance

· all Stainless Steel Fasteners throughout machine

· easily accessible 15 Gallon Secured Aluminum Fuel Tank mounted in rear bed area

· rear mounted hydraulic 3 point hitch with quick tach system that allows for implement installation/ removal in 1 minute or less

DRIVE SYSTEM:

· VM Motori D754 TE3 80 hp 4 cyl., water Cooled Turbo Diesel Engine compliant with EPA mandate 40 CFR 1039.625

· Twin Hydrostatic Transmission

· oil bath lubricated low speed/high torque final drives that require no external greasing

· Thermostatic controlled hydraulic driven cooling fan with reversing feature for radiator/oil cooler cleanout

· Side by side radiator/hydraulic oil cooler

SPEED:

· 8 mph on land, 1 mph in water

TRACK SYSTEM:

· 28” Wide Aluminum Cleats

· Two 10” Wide Low Stretch Rubber Belts per Track

· Four Rows of Urethane Drive Lugs/Track Guides per Track

· Four UHMW Drive Sprockets per Track

· Eighteen 10” urethane Bogie Wheels per Track

· Nine Double Sealed, oil bath lubricated, bogey Wheel Shaft & Bearing Assemblies per track with corrosion proof stainless steel shafts. Must be internally lubricated and sealed requiring no external greasing. Bolt on design with corrosion proof stainless bolts for easy removal and serviceability.

· all corrosion proof stainless steel track bolts and hardware for salt water usage

· final drive hydraulic hoses to have corrosion proof stainless steel fittings and adapters at motors.

· track final drive to be internally lubricated requiring no external greasing.

· front idler shafts to be corrosion proof stainless steel and rear drive shafts are nickel plated for saltwater usage.

ELECTRICAL SYSTEM:

· 12 Volt Battery Secured in Enclosed Compartment

· Engine Temperature Gauge and High Temperature Warning Light

· Engine Oil Pressure Gauge and Low Pressure Warning Light plus Auto Shutdown

· Hydraulic Temperature Gauge and High temperature Warning Light

· Voltmeter Gauge and Charge Light

· Tachometer/Hour meter

· Fuel Gauge

· 2 Front Lights/2 Rear Lights

· 12 Volt Auxiliary Receptacle

WINCH:

· Front Mounted 10,000lb Hydraulic Winch with galvanized drum and 75’ of 7/16" cable

· winch hoses have corrosion proof stainless fittings and adapters at winch for saltwater usage

· front porthole window allowing operator to see winch cable while winching

FIRE SUPPRESSION SYSTEM

· 2 - 55 gallon Aluminum Water Tanks built into each pontoon of Marsh Master

· Level Gauges for Tanks( Mounted in cab)

· Flomax 8 Hydraulic Motor Driven, Self-priming Centrifugal High Volume Water Pump

· 15’ 1 1/2 Suction Hose for quick fill from ditch or lake

· 12’ and 25’ 1 1/2” Goodyear Pli-Cord Discharge Hose

· Fog & Stream Brass Spray Nozzle

· Camlock Hose Connections and Caps for Pump

ROTARY CUTTER SPECIFICATIONS

· Cutting Width: 76”

· Cutting Capacity: 2"Diameter material

· Cutting Heads: Two (2) 38” Diameter

· Blades: Two (2) per Cutting Head; 1/2” x 3” x 11 1/2” Heat Treated Steel

· Spindle Speed: Approx. 1400rpm

· Blade Tip Speed: 17,000 fpm

· Drive Motors: Two (2), 1 per Cutting Head, rated @ 50 hp max power input

· Spindles: Two (2) Extra Heavy Duty with Timken Taper Roller Bearings; Spindle Seals Well Protected From wrap up, grease lubricated

· Deck: 1/4” thick 5086 Aluminum, with 3/8” thick 6061-T6 Aluminum Pivot Mounts and Side Slider Frame

· heavy duty height adjustable skis for supporting cutter deck. Replaceable wear pads on ski bottoms

· Weight: approx.698 lb

· Tilt & Lift System: Hydraulic with Mechanical Controls

· Safety Features: Auto Shutdown when cutter head is tilted up, Foot Switch at operator seat in cab must be depressed to power cutter head. Key switch lockout

· Attachment: Quick Connect Hydraulic Hoses, quick-attach pull frame; 1 minute attach/detach time

· heavy

TRAILER:

· MM-2 galvanized tilt deck trailer with electric brakes

DISC HARROW:

· MM-2LX Disc Harrow

· 5.5’ Galvanized

LOW FLOW AND HIGH FLOW AUXILIARY HYDRAULIC CIRCUITS:

· Low flow auxiliary hydraulic circuit 6gpm@2000psi

· High flow auxiliary hydraulic circuit 25gpm@3500psi max @2000 rpm

WARRANTY:

· Factory Direct

· 1 Year Parts and Labor

· 1 Yr Performance guarantee

ADDITIONAL SPECS (if not included):

· Two mounted cab blowers

· Backup camera with in-cab display mounted on overhead bars by rear transom

· Buggy Jack

· Deck insert package, fully covers rear bed

· Four sets of keys

· 2 hard copies of operating and maintenance manuals

· 2 power points and 2 manual thumb drives