Spec_-_John_Deere_Motor_Grader_0002.pdf

Specification Eastern Nevada Agency, Roads Department

Purchase: John Deere 6WD Motor Grader

1. GENERAL

The Bureau of Indian Affairs (BIA), Eastern Nevada Agency (ENA), Roads Department has identified the need to purchase a six (6) wheel drive (6WD) John Deere Motor Grader. The motor grader will enable the ENA, Roads department to better manage road conditions that adversely affects the driver ability to safely navigate BIA, ENA maintained roads.

2. Scope

The scope for this effort is for a contractor to supply one (1) John Deere 6WD Motor Grader. The equipment shall be to the manufacturer’s standards. No such items or accessories shall be removed or omitted for the reason that it was not specified.

Specification

Manufacturer John Deere

Model 672G/GP

Engine Configuration John Deere Power Tech PSS 9.0L

Non-Road Emission Standard EPA Final Tier 4/EU Stage V

Cylinders 6

Displacement 9.0L (548 cu. in.)

Net Engine Power - Gear 1 149 kW (200 hp)

Net Engine Power - Gear 2 157 kW (210 hp)

Net Engine Power - Gear 3 168 kW (225 hp)

Net Engine Power - Gear 4 172 kW (230 hp)

Net Engine Power - Gear 5 179 kW (240 hp)

Net Engine Power - Gear 6 187 kW (250 hp)

Net Engine Power - Gear 7 190 kW (255 hp)

Net Engine Power - Gear 8 190 kW (255 hp)

Net Peak Torque 1292 Nm (953 lb.-ft.)

Net Torque Rise 50%

Aspiration Series turbocharged, charge-air cooled

Lubrication Full-flow spin-on filter and integral cooler

Air Cleaner With Restriction Indicator Dual element, dry

Power Train: 6-Wheel Drive

Automatic dual-path hydrostatic drive;

increases tractive effort and front-end control; includes separate left and right systems with variable-displacement pumps, axial-piston wheel motors, and freewheel at transport speeds; operator-selectable 15-position rotary aggressiveness control and inching capability down to 0 mph;

precision mode (propelled by front wheels only)

Effective Gears 1–3 forward only

Operating Speeds 0.4–8.0 km/h (0.25–5.0 mph)

Hydrostatic Pumps (2 each) 53 cm3 (3.2 cu. in.)

Wheel Motors 57 cm3 (3.5 cu. in.)

Final Reduction 38.7:1

Transmission

Direct-drive John Deere PowerShift Plus™, modulated shift-on-the-go, Event- Based Shifting (EBS), inching pedal;

independent transmission reservoir with separate filtration and cooling system with 117- L/min. (31 gpm) gear pump

Solid-state load center and sealed-switch Module

EPA Tier 3/EU Stage IIIA and EPA Tier 2/EU Stage II

Voltage 24 volt

Number of Batteries 2

Battery Capacity 1,400 CCA

Reserve Capacity 440 min.

Amp-Hour Rating 224 amp-hour

Alternator Rating 130 AMP

Lights Driving lights; 2 high- and 2 low-beam halogen headlights; front and rear LED turn signals and marker lights; LED brake and hazard warning lights

Welded Construction Standard Circle

Scarifiers Type Front, V-type toolbar with 2-pitch positions and hydraulic float

Width of Cut 1.20 m (48 in.) (4 ft. 0 in.)

Number of Shanks/Teeth 5 (maximum capacity 9)

Lift Above Ground 589 mm (23.2 in.)

Maximum Depth 335 mm (13.2 in.)

Shank - Spacing 146 mm (5.75 in.)

Shank - Size 25 x 76 mm (1 x 3 in.)

Rear Ripper Parallel linkage, with Never Grease pin joints, hydraulic float, and integrated hitch and pin, three (3) ripper shanks

Width of Cut 2.21 m (87.2 in.) (7 ft. 3 in.)

Number of Shanks/Teeth 3 (maximum capacity 5)

Lift Above Ground 602 mm (23.7 in.)

Maximum Depth 426 mm (16.8 in.)

Penetration 9719 kg (21,426 lb.)

Pry-Out 13 702 kg (30,207 lb.)

Shank Size 61.5 x 133 mm (2.42 x 5.25 in.)

Tires/Wheels - Rim 14R24 on 254-mm (10 in.) Rim

Wheel Tread on Ground 2.08 m (82.0 in.)

Overall Width 2.49 m (98.0 in.)

EPA Tier EPA Tier 3/EU Stage IIIA and EPA Tier 2/EU Stage II

Fuel Tank 416.5 L (110 gal.)

Diesel Exhaust Fluid (DEF) Tank —

Cooling System 48.5 L (12.8 gal.)

Engine Oil With Filter 28.0 L (7.4 gal.)

Transmission Fluid 28.4 L (7.5 gal.)

Differential Housing 38.0 L (10 gal.)

Tandem Housings (each) 74.0 L (19.5 gal.)

Circle Gearbox 5.7 L (1.5 gal.)

Front 4840 kg (10,670 lb.)

Rear 11 825 kg (26,070 lb.)

Total 16 665 kg (36,740 lb.)

"Typical Operating Weight With Front Push Block, Rear Ripper/Scarifier, and Other

Equipment" 5987 kg (13,200 lb.)

Front 13 342 kg (29,415 lb.)

Rear 19 330 kg (42,615 lb.)

Total 24 948 kg (55,000 lb.)

Maximum Operating Weight 4840 kg (10,670 lb.)

Additional Equipment

Upper front windshield washers with intermittent wipers Upper rear windshield washers with intermittent wipers Lower front intermittent wiper and washer

Retractable rear sunshade

Heated exterior mirrors (2) (SAE J985)

AM/FM radio with Bluetooth®, auxiliary, and Weather Band ready Premium grading lights (18 LED lights) Moldboard - 4.27 m x 610 mm x 22 mm (14 ft. x 24 in. x 7⁄8 in.)

3. PERIOD OF PERFORMANCE

The Period of Performance shall start from date of notice-to-proceed and last calendar 90 days.

4. SHIPPING

All cost and logistics of transport and delivery of the equipment shall be the responsibility of the awardee. Shipping shall be made to the following address:

Eastern Nevada Agency Roads Department 1324 Justice Road Owyhee, Nevada 89832