140 Rudder Insp-Ovhl SOW_(AN045).pdf
PDF 138 KB Posted
- Attached to
- RUDDER, MARINE Federal contract opportunity
- Solicitation number
- 70Z08521Q49012B00
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SFLC-Std-Spec-0740.pdf | ||
| Solicitation.pdf | ||
| Bar Coding (D-000-0100).doc | DOC document | |
| 140 Rudders Repair Supply Spec 020719 - Edit.pdf | ||
| FAR Clauses.pdf | ||
| Over Haul Description 01-115-3498.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work 140’ WTGB Rudder Blade
“Commercial Inspection/Overhaul”
NSN: 2040-01-115-3498
P/N 10251-562-213
Ref (a): CG Drawing 140-WTGB_562_3_1_-_, Rudder (b): Work Item 1: 140’ WTGB Rudder, Repair
(c): Mil Spec: MIL-C-104, type I (nailed/screwed), class 2 (plywood), style A (Skid base).
(d): Coatings and Color Manual M10360.3C (e): SFLC-Std-Spec-6310 2014 Rev (g): SFLC-Std-Spec-0740 (h): D-000-0100 Bar Coding for USCG’s SFLC Material
1. Receive two (2) “F” condition rudder blades.
2. Examine the shipping containers received for damages. Document/report the physical condition of the shipping containers as received.
3. Clean all machined surfaces of the rudder blades by mechanical means to remove surface rust. Lightly coat the surfaces with a rust inhibitor during inspections.
4. Thoroughly inspect the condition of each Rudder Blade received. Perform a dimensional inspection of each Rudder Blade using references (a). An ultrasonic test (UT) of each rudder blade’s plate thickness shall be conducted as specified in Sec 3 of Ref (b)
5. Perform an air pressure test of the rudders’ void as specified in Sec 3 of Ref (b).
6. Submit a comprehensive condition found report (CFR) annotating all findings with sketchs of each rudder showing all dimensions and measured thickness recorded for review and approval to the Contracting Officer prior to commencing any repair work.
7. All machined surface shall be solvent cleaned and preserved using Mil-PRF-16173 class II, grade 2 and then covered with wooden blanks/plugs.
8. Upon Contracting Officer’s approval, proceed with repairs as specified in Ref (b).
9. SFLC’s QA shall be notified at least one week in advance of inspections. Inspections shall consist of, but not limited to 100% dimensional, air test, paint, packaging and all accompanying and associated documents.
10. Submit a final report to SFLC’s Contracting Officer prior to requesting QA services.
11. Manufacture a reusable shipping container for each rudder if one was not already provided in satisfactory conditions. Refer to section 5 of Ref (b). Return any open shipping skids provided.
12. The Shipping containers’ markings shall be according to Sec 5 of Ref (b).
File details come from the government source that posted it. Updated .