FlexTest_40_Controllers_SOW.docx

MTS FlexTest® 40 Controllers Statement of Work

This requirement is for four (4) MTS FlexTest 40 Controller Assemblies and associated accessories with onsite installation, calibration and commissioning from the vendor. These controllers will be used to replace four (4) out of date MTS Test Star IIs controllers. The FlexTest 40 Controllers will be used to operate the four (4) Separate MTS static and fatigue load frames located in the 5.2.9.2 AVMI Structures Laboratory. These frames are used for load and fatigue calibrations utilized in Test and Evaluation (T&E) of aircraft components and must be identical in form/fit/function to the existing units being replaced and meet new IA requirements to be networked that have been mandated by Department of the Navy. These items are being replaced, because they don’t meet current IA requirements to be networked that have been mandated by Department of the Navy. These items are available from MTS Company. The controllers being purchased will be a one for one direct swap with the controllers being used at the present time. MTS will be tasked to deliver, install/setup and calibrate FlexTest 40 Controllers with existing equipment being controlled by the FOLLOWING purchased equipment:

4650740A

FLEXTEST 40 CNTRL MOD 312.21 LF ASSY

4650740B

FLEXTEST 40 CNTRL MOD 311.41 LF ASSY

4650740C

FLEXTEST 40 CNTRL MOD 311.51 LF ASSY

4650740D

FLEXTEST 40 CNTRL MOD 318.10 LF ASSY

5407801

HYD PRESS UNIT WYE CABLE

054021-05

HYD PRESS UNIT EXT CABLE

525427-09

LOAD CELL W/ MS CONNECT

525431-09

LDVT

397083-09

SERVOVALVE SINGLE

397092-09

GROUND

397014-09

MOD 293.XX HYD SERVO MODULE 24VDC

293.11A-02

MOD 293.11 HYD SERV MAINFOLD ASSY

100-250-220

505 G1+ UPGRADE PACKAGE 505.60/90

047-275-508

MOD 297 OVLD PROTECTION MODULE

056-006-404

MOD 252.24G-01 HYD SERVOVALVE 10GPM