Equipment Purchase Contract Final Specs.pdf

Special Specification for Equipment Purchase Contract

1. Excavator/Forestry machine with masticating attachment

Must meet a minimum of a Tier 4 diesel Must have a minimum of 120 hp Overall transport height not more than 10’ 4” Overall width no more than 8’ 10” Must be equipped with single grouser track shoes.

Must have a minimum of 2 hydraulic pump circuits with a total hydraulic flow no less than 80 gpm Must have a heated/air conditioned cab Must come equipped with an articulating 180 degree knuckle attachment Must come equipped with protective cage over front windshield Equipment must come equipped with all accessory attachment hydraulic lines installed on boom.

Must not have an operating weight of more than 39,750 lbs. without masticating attachment Masticating head must have a minimum working width of 37”, with at total width of no more than 50”.

Masticating head must not weigh more than 2900 lbs.

Masticating head must have a minimum of 18 cutting teeth and come complete with a replacement set Equipment must be able to track, swing, and boom in and out without losing power/flow to masticating attachment.

Delivery address: 875 Mitchell Ave, Oroville, CA 95965

For Technical Questions Please Call Alax Parker @530-532-7459

2. Tracked Carrier Mulcher Specifications

Must meet a minimum of a Tier 4 diesel Must have a minimum of 135 hp Overall height must less than 106” Overall width must be under 90” Must be equipped with 20” wide single grouser steel track shoes or equivalent.

Must have a minimum of 2 hydraulic circuits with a total hydraulic flow no less than 80 gpm High flow hydraulic circuit must produce at or above 55 gpm hydraulic flow.

Must have a heated/air conditioned pressurized cab Masticating head must have a minimum working width of 70”, with at total width of no more that 88”.

Must come equipped with a separate dozer blade attachment Must come equipped with a root rake or grapple bucket or equivalent attachment Must be equipped with a recovery winch

For Technical Questions Please Call Alax Parker @ 530-532-7459

3. Masticating/Mulching attachment for a 2011 CAT 308D CR SB

Must have a minimum working width of 31” Overall tool width must be less than 60” Must have a minimum of 18 cutting teeth and come complete with a replacement set Must weigh of no more than 1100 lbs.

Must be able to function/cut with hydraulic flow specifications of the 2011 CAT 308D CR SB

For Technical Questions Please Call Alax Parker @ 530-532-7459