Attachment 1 Brand Name or Equal Specifications.pdf

Brand Name or Equal Specifica�ons

The requirement is for a Instron 68TM-10 Table Mounted Materials Tes�ng System or equivalent. The UTM shall consist of a table-top 10 kN (1,000 kg, 2,250 lb.) capacity load frame, a load weighing system, so�ware for machine control and data acquisi�on. Previous data from Bluehill so�ware must be able to be used with the machine for con�nuity of ongoing research projects. All components must be fully integrated and supported by the vendor.

1. Variable angle peel fixture

a. 30, 45, 60, 80, 135, and 150-degree angles possible using supplied pulleys

b. Upper fi�ng requires appropriate grip

c. Lower fi�ng uses a pin clevis pin

d. Mounts to the base of the frame

2. 1 kN Pneuma�c Grips

a. Pneuma�c Side Ac�on Grips. Capacity: 1 kN (100 kgf, 225 lbf).

b. Specimen Alignment Device for 2712-04x Pneuma�c Grips

c. Jaw Faces, Rubber Coated. 25 mm wide x 38 mm high (1 x 1.5 in) for 2712- 04x 1 Pneuma�c and 2710-113/4/5/6 Advanced Screw Ac�on Grips.

d. Jaw Faces, Serrated. 25 mm wide x 38 mm high (1 x 1.5 in) for 2712- 04x 1 Pneuma�c and 2710-113/4/5/6 Advanced Screw Ac�on Grips.

e. Quick-release jaw face design

f. Temperature range: -20 °C to +100 °C (-4 °F to +212 °F).

g. Maximum specimen thickness: 13mm (0.5 in)

h. Upper and lower fi�ngs: Type 0m (6 mm clevis pin)

i. Includes two jaw face shields

j. Specimen Alignment Device

3. Compression Platens for Foam tes�ng (one spherical & one rigid)

a. Compression Platen, 150 mm (6 in) diameter, 100 kN

b. Compression Platen with Integral Spherical Seat, 150 mm (6 in) diameter, 100 kN

Force Capacity: 100 kN (10,000 kgf, 20,000 lbf)

i. Mechanical Fi�ng: Type Dm (0.5 in clevis pin)

ii. Temperature Range: -150 to +300 °C (-238 to +572 °F)

iii. Stainless Steel Hardened and Chrome Plated

iv. Force Capacity: 100 kN (10,000 kgf, 20,000 lbf)

v. Mechanical Fi�ng: Type Dm (0.5 in clevis pin)

vi. Temperature Range: -70 to +350 °C (-94 to 662 °F)

vii. Includes LVDT Moun�ng Holes

viii. Platen has locking screws to fix the spherical seat in posi�on to ensure parallelism with a lower platen. Lower platen is not included.

4. Long Travel Extensometer for ASTM D412

a. Balanced Elastomeric Extensometer, XL Long Travel, for dual-column load frames.

SI, US and Metric Calibra�on Units. 250 mm (10 in) travel.

b. Onsite verifica�on

c. Enhanced ASTM E83 Strain Verifica�on

d. Elonga�on: 250 mm (10 in)

e. Resolu�on: 100 microns (0.004 in)

f. Gauge Length at 10, 20, 25, 50, 100, 200 mm

g. Maximum strain: 2500% (at 10 mm gauge length)

h. Gauge Length at 0.5, 1, 2, 5 in

i. Maximum strain: 2000% (at 0.5 in gauge length)

j. Self-iden�fica�on and automa�c calibra�on.

5. 3- & 4-Point Bend fixture

a. Flexure Fixture, 3-Point Bend, ASTM D790, ISO 178, ISO 14125

i. Lower Support Anvils, diameter: 10 mm.

ii. Force capacity: 5 kN (500 kgf, 1,000 lbf, )

iii. Maximum Span: 194 mm (7.64 in)

iv. Minimum Span (4 mm anvil): 4 mm (0.16 in)

v. Minimum Span (10 mm anvil): 10 mm (0.39 in)

vi. Temperature Range: -100 °C to +350 °C

vii. Upper fi�ng: Type Om (6 mm clevis pin)

viii. Lower: Type Dm (0.5 in clevis pin)

viii. Upper Anvil: 10 mm diameter

ix. Lower anvil supplied

x. Lower Support Anvils, diameter: 10 mm.

xi. 10 mm minimum span

b. 4-Point Bend Upper Anvil Assembly. ASTM D6272 and ISO 178

i. Anvils: 10 mm (0.39 in)

ii. Span: 10 - 97 mm (0.39 - 3.8 in)

iii. Connec�on: Om (6 mm clevis pin)

iv. Includes 10 mm diameter anvils

6. Puncture Probe Set (9 probe set) Includes:

a. Needle cherry piter

b. Round, flat ended probes: 0.0625/0.125/0.1875/0.3125/0.375/0.25/0.5 in diameter and 1 sq.cm area (0.444 in dia)

c. Upper and Lower fi�ngs

7. Nail or Screw Withdrawal Fixture

a. Wood Test Fixture, nail, or screw withdrawal tool per ASTM D1037

8. Magness-Taylor Puncture Probes Includes:

a. Probes of 7.9 mm (0.31 in) and 11.1 mm (0.44 in) diameter.

b. Upper and lower fi�ngs

9. Three Jaw Chuck Force capacity:.500 N (100 lbf, 50 kgf)

a. Minimum specimen diameter: 1.5 mm (.06 in)

b. Maximum specimen diameter: 13 mm (0.5 in)

c. Temperature range: 0 °C to +100 °C (-32 °F to +212 °F)

d. Fi�ng: Type 0m (6 mm clevis pin)

e. Weight: 340 g (.75 lb.) Includes one chuck.