Malt_Cans.pdf

Lip 1.0 cm ! [ J Top lid snug fit on can, but removable

Diameter 14.5 cm (ID)

• • 1.1 cm

Total Height of can with lid fitted on~ 5.1cm

Height 5.1 cm

2 mm ~ • 1 • • ~ t Bottom lid diameter - t 1.1 cm spot welded circular ----------------------, .! to can bottom holes [ J 12 per row le========::::::::::::::::::::::::=========-' Lip 1.0 cm holes evenly spaced

Half Germination Can

Metal thickness =_18ga stainless steel

Mesh

- has lmm2 holes

Mesh is 6.4mm above bottom s E u 0) rri .-I

E u

CV')

.-I

Half Steep Can

0.70mm gauge stainless steel

Each 4.5cm side has a tab. Tabs fastened to inside, are 2.0cm x 1.0cm, have 2.5mm diam. holes. Hole centers are 7.0mm below rim of box.

Upper part of tab projects 4mm inward.

0 D

8.6cm long cylindrical rod with 2.3mm diameter; rod Will fit between tabs on inside of can.

Metal thickness = 18ga stainless steel

H=

16.5cm

Metal thickness = 18ga stainless steel

Radius = 5.5cm

1.0cm (OD)

H=

15.0cm

Mesh screen is 2.5cm above bottom. Screen consists of 2mm2 squares

Semi-cylindrical bulge around semicircle starts 2.2cm above bottom, is 5mm high and projects 3mm outward

Half Kiln Can