Attachment_2_C_Edits_to_Specifications.docx

Attachment 2 C

The following changes are incorporated in the drawings and Specifications

1. DELETE: in the drawings, all instances of “RECONDITION CROWN SECTION, SHOULDER TO SHOULDER” Replace with: “RECONDITION CROWN SECTION, CLEARING LIMIT TO CLEARING LIMIT”

2. DELETE: all instances of “riprap, class III” Replace with: “riprap, SCDOT Class B, or equal”

3. DELETE: entire “CROWN SECTION” page, on or about page 6 Replace entire page with (attached): “CROWN SECTION” and “GEOTEXTILE DRAWING DETAIL”

4. DELETE: Drawing Detail, “TYPICAL SECTION”, page 7

5. ADD: Drawing Note, page 7 “Heavy Brushing shall be performed per specification FM&S 201.1; with the exception that no commercial timber shall be cut, unless designated by the CO.”

“See Specifications Figure 101-1 ‘Illustration of road structure terms’ describing Clearing Limit.”

“Road and/or Ditch sections meeting specification, may remain undisturbed, as directed by CO (COR).”

“Disposal areas for unsuitable material will designated on the ground by the CO (COR).”

6. ADD: Drawing Note, (on or about page 10) “HAZARD MARKER INSTALLATION” “Hazard Marker detail is a standard exhibit. See schedule of items, milepost and description for specific work requirements.”