1202-3504-Fluke MOLBOX Sole Source REDACTED.pdf

JUSTIFICATION FOR SOLE SOURCE (SAP <$100k) Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)

8The service or material listed on (Document number) 1202-3504 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name. (If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: Fluke Electronics (PRESSURE AND GAS FLOW CALIBRATION PRODUCTS) Manufacturer POC & Phone Nr. Jeff.Grossman com: 602.773.4733 // cell: 602-773-4713 Mfr. Address 4765 EAST BEAUTIFUL LANE // PHOENIX, AZ 85044-5318 Manufacturers Dealer/Rep Fluke Electronics Dealer/Rep Address/Phone Number _6920 Seaway Blvd Everett Washington 98203-5829

_ 877-355-3225 Fax No:425-446-5716

_X___Description of the item or service required, the estimated cost, and required delivery date.

Qty 1 each Fluke Electronics (cage 89536,2J641,or 4U744) MOLBOX Gas Flow Calibration System RDD

30 SEP 2021

_X___Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.). Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

The Fluke Electronics model MOLBOX Gas Flow Calibration System is utilized in multiple Navy Calibration Procedures for the calibration of a wide variety of air and gas flow test measurement and diagnostic equipment (TMDE). The MOLBOX Gas Flow Calibration System and its components are listed as authorized standards in NAVSEA OD 48939 Navy Calibration Equipment (NCE) Publication. IAW OPNAVINST 3960.16b para 6x, only equipment listed in the NCE can be used to perform calibrations.

Fluke Electronics is the original equipment manufacturer and the only authorized manufacturer for this model MOLBOX Gas Flow Calibration System.

_X__ The requested material or service represents the minimum requirements of the Government This requested Fluke Electronics model MOLBOX Gas Flow Calibration System will become part of existing PSNS and IMF (Shop 52 Calibration Lab KBS) Measurement Calibration Standards Equipment that support air and gas flow devices and equipment located at PSNS and IMF, Everett, and Japan locations as well as essential to the support of Naval Fleet Forces.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

____The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

___ A patent, copyright, or proprietary data limits competition. The proprietary data is:

____These are “direct replacements” parts/components for existing brand name equipment.

__X__Other information to support a sole-source buy:

The sole source is submitted to ensure that exact model and MFR are purchased without substitution due to item end use being a calibration standard. Actual source of procurement is not being limited, only model (item #’s) and manufacturer.

Note: Fluke Electronics model MOLBOX Gas Flow Calibration System is unavailable via Naval Stock System.

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN COMPETITION.

Activity: _

Metrology Plannerman Signature:________________________________ Date:

Contracting Officer Signature________________________________ Date__________________ FISCPS 4200/180 (Rev. 10/1/10)

07/29/2021