1. SOW 3D Scanning System.pdf

Three-Dimensional Scanning System

Anniston Army Depot (ANAD) requires an additional portable optical coordinate measuring machine (CMM) that provides measurement accuracy that is insensitive to the instabilities of any environment.

1.0 Requirements:

1. The system shall be free of any rigid measurement setup and can be moved at any time during the measurement sequence.

2. The system shall utilize the VX Element software currently in use on

ANAD.

3. The system shall interface with the HandySCAN 3D currently in use on

ANAD.

2.0 The following are the Salient Characteristics:

1. Portable 3D Scanning, reverse engineering, quality control, and non-destructive testing

2. Creaform Metrascan Black Elite

a. Accurate up to 0.0009 inch

b. Volumetric Accuracy at 320 cubic feet no less than 0.0025 inches

c. Measurement rate of 1,800,000 measurement per second

d. Light Source 15 blue laser crosses plus 1 extra line minimum

e. Laser Class 2M eye safe

f. Scanning area 12.2 inches x 13.8 inches

g. Weight 3.28lb max

3. HandyProbe Next Elite portable CMM including stylus

a. Accurate up to 0.0009 inches

b. Measurement rate of 80 measurements per second

c. Single Point repeatability 0.0017 inches minimum at 320 cubic feet

d. Weight 1.1lb max

4. 2 each C-Track Elite Optical tracker with lightweight tripod

a. 6 degrees of freedom measuring (position and orientation) of a rigid set of reflectors

b. Repeatable accuracy at 320 cubic feet 0.0004 inches minimum

c. Measurement Rate of 6,600 reflectors per second

d. Weight 12.5lb max

5. VX Elements Software

a. VXscan

i. Live mesh visualization

ii. Smart Resolution improving resolution as needed

iii. Mesh enhancement to optimize mesh quality

b. VXprobe touch probe module

c. VXshot photogrammetry software

6. VXmodel Software with Dongle

a. Integrated into VXelements

b. Prepares 3D scan for 3D printing

7. PolyWorks / Inspector Standard (node-locked)

8. C-Link for C-Track, HandyProbe, and MaxShot

9. Compatible with SolidWorks

10. Company accreditation ISO 9001 and ISO 17025

11. Five days on-site training – 7 hours per day for 3 people minimum

12. Accessories:

a. Carrying Case

b. Universal Power Supply

c. 250 each adhesive targets minimum

d. Calibration Cone, Calibration Sphere, and Calibration Plate

e. Portable Shop floor Workstation

f. 3 each 8 meters MetraScan cable

g. Smart probe adapter for HandyProbe

h. HandyProbe 100mm extension M4 ceramic

i. HandyProbe 50mm extension M4 ceramic

j. HandyProbe 15mm point probe

k. HandyProbe 3mm ruby – L20-M4

l. HandyProbe 90° Elbow

m. 2 each Target - 12mm swivel at 45° with magnetic support

n. 6 each Target – 12mm swivel at 90° with magnetic support

o. 10 each Target – Glass protected magnetic reflector 12mm at 0°

3.0 Content. Two each printed and two each electronic copies of Commercial Off the Shelf manuals shall include electrical, hydraulic, and pneumatic schematics, as applicable; parts lists, troubleshooting procedures, preventive maintenance requirements, lubrication schedules, calibration procedures, etc. Catalogs shall fully describe optional tooling, fixtures, and attachments available for the equipment furnished. In addition, any other technical data normally furnished with the equipment shall be provided in digital as well as a hard copy. All technical data shall be furnished in the English language.

4.0 Delivery. Shipping, handling, and delivery fees included in contract price. Delivery shall be within ninety days of contract award.

5.0 Scope Change. The Contractor shall not proceed with any verbal or written change(s) to the scope of work from sources other than the Contracting Officer, who will provide changes in writing.