06_REWORK_AND_REPAIR_OF_NONCONFORMING_MATERIAL.docx
DOCX document 20 KB Posted
- Attached to
- LEFT / RIGHT SPOILER ACTUARTOR CARTRIDGE Federal contract opportunity
- Solicitation number
- FA821323R3020
About this file
This document provides rework and repair procedures for nonconforming materials on federal contracts. It defines rework as reprocessing material to make it fully conform to specifications, while repair reduces but does not eliminate nonconformities. Contractors must document and submit rework procedures for government review and approval before implementation. Repair procedures require submission of a request for deviation including cause analysis and corrective actions to prevent recurrence. All reprocessed or repaired items must be reinspected according to a procedure taking precedence over technical specifications and providing assurance of meeting requirements. These flow down to contractors, suppliers, vendors and subcontractors on the supply chain.
The related federal contract opportunity is for spoiler actuator cartridges for the Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base. Solicitation number FA821323R3020 seeks these left and right spoiler actuators.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821323R3020.pdf | ||
| 03_ADC_SOW.docx | DOCX document | |
| IDIQ Pricing Matrix.xlsx | XLSX spreadsheet | |
| 04_CADPAD_Item_Marking_Instruction.pdf | ||
| 01_AIR_SPEC.docx | DOCX document | |
| 07_Item_descritpion.pdf | ||
| 08_CDRLS.pdf | ||
| 02_REPSHIP.docx | DOCX document | |
| 05_SOW_Packaging.pdf | ||
| 09_IHC.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 5
(ES7034)
REWORK AND REPAIR OF NONCONFORMING MATERIAL
Jan 2012 (version)
(a) Rework and Repair are defined as follows:
(1) Rework - The reprocessing of nonconforming material to make it conform completely to the drawings, specifications or contract requirements.
(2) Repair - The reprocessing of nonconforming material in accordance with approved written procedures and operations to reduce, but not completely eliminate, the nonconformance. The purpose of repair is to bring nonconforming material into a usable condition. Repair is distinguished from rework in that the item after repair still does not completely conform to all of the applicable drawings, specifications or contract requirements.
(b) Rework procedures along with the associated inspection procedures shall be documented by the Contractor and submitted to the Government Quality Assurance Representative (QAR) for review prior to implementation. Rework procedures are subject to the QAR's disapproval.
(c) Repair procedures shall be documented by the Contractor and submitted on a Request for Deviation/Waiver, DD Form 1694, to the Contracting Officer for review and written approval prior to implementation.
(d) Whenever the Contractor submits a repair or rework procedure for Government review, the submission shall also include a description of the cause for the nonconformances and a description of the action taken or to be taken to prevent recurrence.
(e) The rework or repair procedure shall also contain a provision for reinspection which will take precedence over the Technical Data Package requirements and shall, in addition, provide the Government assurance that the reworked or repaired items have met reprocessing requirements.
(f) Rework and repair is a supply chain flow-down requirement that applies to contractors and their suppliers, vendors or subcontractors.
(End of clause)
(ES7034)
File details come from the government source that posted it. Updated .