02043 GR Interim Changes Feb 2020.docx

02043 INTERIM CHANGES

TROUSERS, MEN'S: POLYESTER/WOOL GABARDINE,GREEN

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

ADDITIONAL INFORMATION FOR MIL-T-29452:

TROUSERS, MEN'S: POLYESTER/WOOL GABARDINE,GREEN SHADE 2212, SHALL BE MADE IN ACCORDANCE WITH CLASS 1.

PATTERN DATE: 26 Sept. 2011

SAMPLE SIZE: 34REG

STANDARD SAMPLE OF CLOTH, POLY/WOOL GABARDINE,10.6 OZ, GREEN SHADE 2212 CONFORMING TO TYPE II,CLASS 12 OF MIL-C-10176 IS AVAILABLE ON ROLL NO. 3935 FOR SHADE, FINISH AND COLORFASTNESS.

INTERIM SPECIFICATION CHANGES TO MIL-T-29452A:

PAGE 2, PARAGRAPH 2.1.1 SPECIFICATIONS DELETE "V-T-295" AND INSERT "A-A-59826".

PAGE 3, PARAGRAPH 2.1.1, UNDER "SPECIFICATIONS"

PAGE 3, PARAGRAPH 2.1.1, UNDER "SPECIFICATIONS",

"MILITARY", DELETE "MIL-C-43920 - CLOTH,

INTERLINING, COTTON OR SYNTHETIC AND NYLON" AND

ADD UNDER "SPECIFICATIONS", "FEDERAL",

"A-A-52108 - CLOTH, INTERLINING, COTTON AND

SYNTHETIC, OR SYNTHETIC".

PAGE 5, PARAGRAPH 3.3.4, LINE 3, DELETE "MIL-C-43920" AND SUBSTITUTE "A-A-52108".

Page 5, Paragraphs 3.3.5 and 3.3.5.1, delete in their entirety and substitute: "3.3.5 Slide Fastener. The trouser slide fastener shall conform to Type I, style 1 or 2 (continuous) or style 4 or 5 (preassembled), cam or semi-automatic locking, size 4-5, short table pull of A-A-55634. All metal components of the slide fastener shall be brass, except for the cover and spring on a semi-automatic pin lock which shall be stainless steel. All component parts shall be from the same contractor. Style 1 and 2 require the application of a slider and bottom stop during the production of the trousers. The color of the slide fastener shall approximate the shade of the basic material."

Page 5, Paragraph 3.3.5.2 Colorfastness, delete paragraph number "3.3.5.2" and substitute "3.3.5.1".

Page 5, Paragraph 3.3.6: Delete in its entirety and substitute: "Hook and eye. The hook and eye for waistband closure shall be Industrial Machining and Design Services, Inc. Part No. IMDSDS-008 (#8 nickel plated hook) and Part No. IMDSDS-085 (#85 nickel plated eye); Metalform Part No. 1666 (H49/E50 complete set); YKK Snap Fasteners America Part No. 829-0000-310 (#8 Hook), Part No. 830-0000-310 (#85 Eye), Part No. PF5-0000-340 (#8 Hook Plate), and Part No. PF6-000-340 (#85 Eye Plate) available from Snapco Manufacturing Corporation, or equal. The finish of both components shall be nickel plate (see 6.7).".

PAGE 6, PARAGRAPH 3.3.7.1, DELETE "V-T-295" AND INSERT "A-A-59826".

PAGE 7, AFTER PARA. 3.3.10 ADD NEW PARAGRAPH: "3.3.10.1 DLA Exclusive woven label Each pair of trouser shall contain a DLA Exclusive woven label shall incorporate the DLA Logo (See doc.list, DLA-EXC-LABEL) and shall specify "Made exclusively for Defense Logistic Agency" and shall include "by" and the contractor's name. The proposed finished label's design shall be submitted to the contracting officer for approval."

PAGE 7, PARAGRAPH 3.4, DESIGN, LINE 4, AFTER "FOR" INSERT "ALL" AND AFTER "SIZES" INSERT ";" AND DELETE THE REMAINDER OF THE STATEMENT ON BELT LOOPS.

PAGE 26, OPERATION 11.D, LINE 2, AFTER "TROUSERS", ADD ".", AND DELETE THE REMAINDER OF PARAGRAPH.

PAGE 32, OPERATION 15H, ADD NEW PARAGRAPH 15.H.1 "Position the DLA Exclusive woven label on the inside left back pocket to finish between the bottom of trouser curtain and the top welt stitching. The label shall face the wearer."

PAGE 39, OPERATION 20, FINISHED APPEARANCE,LINE 4 AFTER "FOR" ADD "ALL SIZES", AND DELETE THE REMAINDER OF THE SENTENCE PAGE 40, OPERATION 20, ATTACH WAISTBAND AND SET BELT LOOPS, LINE 1, AFTER "BETWEEN" ADD "EACH".

PAGE 43, OPERATION 24A AT THE END OF THE PARAGRAPH ADD, "NOTE: AS AN ALTERNATE THIS

OPERATION MAY BE OMITTED."

PAGE 50, OPER 32, AT THE END OF THE PARAGRAPH ADD "NOTE: AS AN ALTERNATE THE AUTOMATIC BELT LOOP TACKER MAY BE USED ON ALL BELT LOOPS."

PAGE 64, INSERT NEW PARAGRAPH 6.7: Hook and eye suggested sources of supply. A known source for Part Numbers IMDSDS-008 AND IMDSDS-085 is Industrial Machine and Design. 2007 South Avenue, Youngstown, OH 44502-2245, http://www.imds-ohio.com. A known source for Part Number 1666 is Metalform Co, Inc., 555 John Downey Drive, New Britain, CT 06051, http://www.metalformcompany.com. A known source of supply for Part Numbers 829-0000-310, 830-0000-310, PF5-0000-340 and PF6-0000-340 is Snapco Manufacturing Corporation, 140 Central Avenue, Hillside, N.J. 07205, http://snapcofasteners.com/."

PAGE 64, PARAGRAPH 6.7, SUBJECT TERMS (KEY WORDS) LISTING: DELETE PARAGRAPH NUMBER "6.7" AND SUBSTITUTE, "6.8".

PAGE 65, "FIGURE 1", DELETE REFERENCE TO ADDITIONAL BELT LOOP ON SIZES 38 AND UP.

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

ADDITIONAL INFORMATION FOR A-A-52108: NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION: INTERIM CHANGES TO A-A-50186:

PAGE 1: PARA. 1.1 TYPES, NEXT TO TYPE V NON-WOVEN ADD "(MEDIUM WEIGHT)", UNDER TYPE V ADD "TYPE VI NON-WOVEN (LIGHT WEIGHT)".

PARAGRAPH 2.1, LINE 5. GENERAL.: DELETE "SATURATION BONDED WITH ACRYLIC TYPE BINDER"

AND SUBSTITUTE "EITHER WET-LAID, SATURATION BONDED OR THERMAL BONDED".

PAGE 2: TABLE 1. PHYSICAL REQUIREMENTS (WOVEN) UNDER TEST

METHOD COLUMN, LINE 3 DELETE "1600" AND SUBSTITUTE

"AATCC 20 3/".

TABLE I. PHYSICAL REQUIREMENTS (WOVEN) AT BOTTOM OF

PAGE UNDER FOOTNOTE 2/ ADD THE FOLLOWING: "3/ AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS TEST METHOD."

PAGE 3, TABLE II, PHYSICAL REQUIREMENTS (NONWOVEN) UNDER TYPE V, AND VI, ACROSS "CONSTRUCTION": DELETE "WET-LAID" AND "WET-LAID OR SATURATE, THERMAL BONDED" AND SUBSTITUTE "SEE 2.1" FOR BOTH TYPES.

TABLE II, UNDER TYPE VI: ADD UNDER EACH CHARACTERISTIC:

"1.5, 12, 8, 2.5, 2.5, WET-LAID OR SATURATE THERMAL BONDED" RESPECTIVELY.

PAGE 3, PARA. 3.2 FINISH. LINE 1 DELETE "AN APPROVED" AND SUBSTITUTE " A COMMERCIALLY ACCEPTED".

PAGE 5: ADD THE FOLLOWING: "5.7 SUPER SESSION DATA.

THE TYPES OF CLOTH COVERED BY THIS COMMERCIAL ITEM

DESCRIPTION REPLACE TYPES COVERED BY CCC-C-438 AS FOLLOWS:

A-A-50186 CCC-C-438

TYPE I TYPE I, CLASSES 1 AND 2

TYPE II TYPE II, CLASS 1

TYPE III TYPE III, CLASS 1

TYPE IV TYPE III, CLASS 2

TYPE V TYPE IV, CLASS 1

TYPE VI TYPE IV, CLASS 2"

ADDITIONAL INFORMATION FOR A-A-50198A

THREAD, GIMP, COTTON, BUTTONHOLE

ADDITIONAL INFORMATION FOR A-A-52094A THREAD, COTTON

NO ADDITIONAL INFORMATION

ADDITIONAL INFORMATION FOR A-A-52106:

INTERIM CHANGES TO A-A-52106:

PAGE 1, UNDER ABSTRACT. AFTER "THE CLASS 3 CLOTH IS INTENDED FOR USE AS LINING MATERIAL IN DRESS COATS." ADD "CLASS 4 CLOTH IS INTENDED TO BE USED AS A

GARMENT LINING. CLASS 5 CLOTH IS INTENDED FOR USE

AS A NECKTIE AND NECKTAB OUTERSHELL FABRIC."

PAGE 1, CLASSIFICATION. ADD CLASS 4 - LIGHT WEIGHT 2.4 OZ; 2/1 RIGHT HAND TWILL USING 100% FILAMENT POLYESTER SINGLE PLY YARNS FOR BOTH CLASS 4 AND CLASS 5. CLASS 5 - MEDIUM WEIGHT 3.0 OZ; 5/1 HERRINGBONE TWILL PAGE 1, PARAGRAPH 1.1 CLASSIFICATION: ADD PAGE 1, GENERAL DESCRIPTION. LINE 5 AFTER "YARNS" ADD "THE CLASS 4 CLOTH SHALL BE A TW0 UP-ONE DOWN RIGHT HAND TWILL. THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE

DOWN HERRINGBONE TWILL. THE YARNS FOR CLASS 4 CLOTH

SHALL BE SINGLE PLY WITH A NOMINAL DENIER OF 70 FOR THE WARP YARNS AND 150 FOR THE FILLING YARNS. PAGE 2, TABLE I CLOTH REQUIREMENTS AFTER CLASS 3"

ADD INFORMATION FOR "CLASSES 4 AND 5"

CHARACTERISTIC CLASS 4 CLASS 5

MATERIAL CONTENT, PERCENT:

POLYESTER 100% 100%

COTTON 0 0

RAYON 0 0

COLORFASTNESS TO:

PERSPIRATION GOOD GOOD

SUBLIMATION GOOD GOOD

WET DRY-CLEANING GOOD GOOD

CROCKING (MIN.) 3.5 3/ 3.5 3/

(BLACK OR DARK

BLUE COLORS) 1.0 3/ 1.0 3/

LABILE SULFUR CONTENT 4/ 4/

WEIGHT, OZ. /SQ. YD.(MIN.) 2.4 3.0

YARNS PER INCH (MIN.)

WARP 124 140

FILLING 76 75

BREAKING STRENGTH POUNDS (MIN.)

WARP 140 160

FILLING 110 130

TEARING STRENGTH POUNDS (MIN.)

WARP 5.0 14.0

FILLING 3.0 10.5

PAGE 2, PARAGRAPH 2.1 GENERAL DESCRIPTION: AFTER "THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN "THE CLASS 5 CLOTH, USING 100 % FILAMENT HERRINGBONE TWILL." INSERT "THE CLASS 6 CLOTH POLYESTER SINGLE PLY WITH BLACK 70 DENIER NOMINAL WARP AND AIR FORCE BLUE 1622 150 DENIER NOMINAL FILLING YARNS." USING 100% FILAMENT POLYESTER SINGLE PLY WITH 70 DENIER NOMINAL IN THE WARP AND 150 DENIER NOMINAL IN THE FILLING DIRECTION."

PAGE 2, PARAGRAPH 2.2 PHYSICAL REQUIREMENTS:

TABLE I. CLOTH REQUIREMENTS, ADD THE FOLLOWING:

PAGE 3, AFTER 2.3 LENGTH AND PUT-UP. ADD THE FOLLOWING

NEW PARAGRAPH: "2.4 COLOR. THE COLOR OF THE FINISHED

CLOTH SHALL BE AS SPECIFIED (SEE 5.1) AND SHALL MATCH THE STANDARD SAMPLE FOR SHADE. CLASS 5 FABRIC IS MADE

ADDITIONAL INFORMATION FOR V-B-871: NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR A-A-55634A, 23 MARCH 2004:

SPECIAL NOTE!! ALL SLIDE FASTENERS USED ARE TO BE MEASURED FROM "STOP TO STOP". RECOMMEND THAT THIS MEASUREMENT BE TAKEN RANDOMLY BEFORE SLIDE FASTENERS ARE SEWN TO THE ITEMS, COVERALL, OR ANY ITEM REFERRED TO IN THE SOLICITATION. "THE QAR WILL REJECT ANY SLIDE THAT IS NOT LAYING FLAT AFTER IT IS SEWN INTO/ONTO AN ITEM." SPECIAL INFO ON ITEMS THAT UTILIZE SLIDE FASTENERS IS GIVEN BY "ALL USING MILITARY PERSONNEL".

CHANGES TO V-T-295E:

THREAD, NYLON; V-T-295 DATED AUGUST 1, 1985 IS HEREBY CANCELLED; FUTURE ACQUISITONS SHOULD REFER TO THREAD, NYLON, A-A-59826 DATED 03 MARCH 2009 AS A REPLACEMENT.

Additional information for Thread, Nylon, A-A-59826 Dated 03 March 2009

Thread, Nylon, A-A-59826, dated 03 March 2009, has replaced Specification V-T-295E dated 1 August 1985.

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE TYPE VI FINISHED LABEL." UNDER "TEARING STRENGTH" DELETE: "(LB.) MINIMUM" AND SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD "AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR MIL-DTL-10176:

PAGE 7 3.7.3, LINE 2: DELETE "5.5" AND SUBSTITUTE "5.0" ADD THE FOLLOWING PARAGRAPHS:

"3.7.4 WATER REPELLENT TREATMENT. WHEN SPECIFIED, THE CLOTH SHALL BE GIVEN AN APPROVED DURABLE FLUOROCHEMICAL TYPE WATER REPELLENT TREATMENT AND SHALL CONFORM TO THE REQUIREMENTS SPECIFIED IN 3.7.2 WHEN TESTED AS SPECIFIED IN 4.4.4.

3.7.4.1 SPRAY RATING. THE RESULTS OF THE THREE INDIVIDUAL DETERMINATIONS ON THE SAMPLE UNIT FOR SPRAY RATING SHALL BE EQUAL TO OR BETTER THAN RATINGS OF 90,90,80 INITIALLY AND 80,80,70 AFTER ONE DRYCLEANING WHEN TESTED AS SPECIFIED IN 4.4.4."

PAGE 9, PARAGRAPH 4.3.3.1 YARD-BY-YARD

EXAMINATION, LINE 3, DELETE "10" AND SUBSTITUTE

"7", LINE 4, DELETE "12" AND SUBSTITUTE "8"

TABLE II, BELOW "PH": ADD THE FOLLOWING UNDER

THEIR RESPECTIVE COLUMNS:

"WATER REPELLENCY:

SPRAY RATING:

INITIAL--------3.7.3.1---------5526

AFTER 1 DRYCLEANING----3.7.3.1---5508 AND 5526

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER ALCOHOL WETTING AGENT SHALL BE USED TO INSURE SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT FINISH IS NOT RELEASED. THE WATER REPELLANT TREATMENT MUST BE APPLIED BEFORE THE SPONGING OPERATION.

ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.

CODE OF FEDERAL REGULATIONS

16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES

ACT REGULATIONS.

29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH

STANDARDS.

(APPLICATIONS FOR COPIES OF REFERENCED DOCUMENTS SHOULD BE ADDRESSED TO U.S

GOVERNMENT PRINTING OFFICE, SUPERINTENT OF DOCUMENTS, MAIL STOP: SSOP, WASHINGTON, DC 20402-9328.)

PRINCIPLES AND METHODS OF TOXICOLOGY, A. WALLACE HAYES (EDITOR), 1989, PP 394-396.

(APPLICATIONS FOR COPIES OF REFERENCED DOCUMENTS SHOULD BE ADDRESSED TO RAVEN

PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK, NY 10036.)

TOXICITY. THE FINISHED CLOTH SHALL NOT PRESENT A DERMAL HEALTH HAZARD WHEN USED

AS INTENDED.

TOXICITY ASSESSMENT. THE CONTRACTOR MUST FURNISH INFORMATION WHICH CERTIFIES THAT THE FINISHED PRODUCT IS COMPOSED OF MATERIALS WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR PROVIDE SUFFICIENT TOXICITY DATA TO SHOW COMPATIBILITY WITH PROLONGED, DIRECT SKIN CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION STUDY IN LABORATORY ANIMALS AND A REPEATED INSULT HUMAN PATCH TEST (MODIFIED DRAIZE PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER THE SUPERVISION OF A QUALIFIED DERMATOLOGIST USING AT LEAST 100 FREE LIVING INDIVIDUALS.

INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH,

NAVY SHADE 3346 ONLY.

APPLICABLE WHEN PROCURING CLOTH FOR THE

FOLLOWING ITEMS:

COAT, MANS, BLUE, DRESS, MIL-C-29107

COAT, WOMAN'S, BLUE, DRESS, MIL-C- 29628

SKIRT, WOMAN'S, BLUE, DRESS, MIL-S-29631

SLACKS, WOMAN'S, MIL-S-29630

TROUSERS, MANS, CLASS 12 MIL-T-41828

ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT. THE FOLLOWING DOCUMENTS ARE AUTHORIZED FOR USE IN LIEU OF MIL-B-17757:

ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD SHIPPING CONTAINERS.

ADDITIONAL INFORMATION FOR MIL-C-43920:

A-A-52108 HAS BEEN AUTHORIZED IN PREFERENCE TO MIL-C-43920.

INTERIM SPECIFICATION CHANGES: INTERIM CHANGES TO AMEND. 2 OF MIL-C-43920:

PAGE 1 OF 2, IN TABLE I, UNDER "THICKNESS/INCH",

TYPE I, DELETE ".026 +/- .006" AND SUBSTITUTE

"0.018 - 0.032".

TYPE II, DELETE ".022 +/- .006" AND SUBSTITUTE

"0.016 - 0.028".

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN CANCELLED AND REPLACED BY ASTM-D-6193, 4/98 STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE TO FED-STD-751.

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

- MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E

w/CHANGE 1 23 December 2013

SUPERSEDING

MIL-STD-147E

16 May 2008

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

ADDITIONAL INFORMATION FOR MIL-STD-1488:

PAGE 2, PARAGRAPH 4, UNDER "DOCUMENT" DELETE "MIL-T-43654...ARCTIC" AND SUBSTITUTE "CO/PD-99-19 CLASSIFICATION U TROUSERS, SNOW CAMOUFLAGE, WHITE"

INTERIM CHANGES TO MIL-STD-1488G:

PAGE 21 DEFECT XXX. POCKET OR FLAP., PARAGRAPH "A" AT THE END OF THE PARAGRAPH DELETE IN IT'S ENTIRETY AND SUBSTITUTE:

D SD U

1. MORE THAN 1/2 INCH * 3 2

2. MORE THAN 1/4 UP TO 1/2 INCH 3 3 2

3. MORE THAN 1/8 UP TO 1/4 INCH 2 2 1

PAGE 6, TABLE I DELETE IN ITS ENTIRETY AND SUBSTITUTE "TABLE I SAMPLING PROVISIONS FOR END ITEM VISUAL EXAMINATION OF DRESS (D) TROUSERS:

NORMAL INSPECTION:

LOT SIZE SAMP SZ MAX ACC MAX ACC PT VALUE

NUM FOR

SELECTED

DEFECTS

(SEE 1.2)

UP THRU 90 20 0 3 PT 6 PT

91 THRU 150 32 0 5 PT 9 PT

151 THRU 280 50 0 7 PT 13 PT

281 THRU 500 80 0 9 PT 17 PT

501 THRU 1200 125 1 14 PT 25 PT

1201 THRU 3200 200 1 18 PT 33 PT

3201 THRU 10,000 315 2 24 PT 48 PT

10,001 THRU 35,000 500 3 35 PT 72 PT

35,001 AND OVER 800 5 55 PT 110 PT

TIGHTENED INSPECTION:

UP THRU 150 32 0 2 PT 5 PT

151 THRU 280 50 0 3 PT 7 PT

281 THRU 500 80 0 5 PT 11 PT

501 THRU 1200 125 1 9 PT 17 PT

1201 THRU 3200 200 1 13 PT 26 PT

3201 THRU 10,000 315 2 20 PT 39 PT

10,001 THRU 35,000 500 3 30 PT 59 PT

35,001 AND OVER 800 5 45 PT 89 PT

REDUCED INSPECTION:

UP THRU 280 20 0 2-6 PT 11 PT

281 THRU 500 32 0 3-9 PT 15 PT

501 THRU 1200 50 0 5-10 PT 18 PT

1201 THRU 3200 80 0 8-13 PT 24 PT

3201 THRU 10,000 125 1 12-17 PT 28 PT

10,001 THRU 35,000 200 1 17-21 PT 33 PT

35,001 AND OVER 800 2 23-29 PT 47 PT

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND VALUE HAS NOT BEEN EXCEEDED, ACCEPT THE LOT BUT REINSTATE NORMAL INSPECTION (SEE 6.4.4B). THE SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT VALUE.

TABLE II DELETE IN ITS ENTIRETY AND SUBSTITUTE: "TABLE II SAMPLING PROVISIONS FOR END ITEM VISUAL EXAMINATION OF SEMI-DRESS (SD) TROUSERS:

NORMAL INSPECTION:

LOT SIZE SAMP SIZE MAX ACCP PT VALUE

3&2 PT 3.2.&1 PT

DEFECTS DEFECTS

UP THRU 500 50 7 PT 14 PT

501 THRU 1200 80 9 PT 20 PT

1201 THRU 3200 125 14 PT 26 PT

3201 THRU 10,000 200 19 PT 38 PT

10,001 THRU 35,000 315 27 PT 57 PT

35,001 AND OVER 500 41 PT 85 PT

TIGHTENED INSPECTION:

UP THRU 500 50 3 PT 10 PT

501 THRU 1200 80 5 PT 15 PT

1201 THRU 3200 125 8 PT 23 PT

3201 THRU 10,000 200 12 PT 34 PT

10,001 THRU 35,000 315 19 PT 52 PT

35,001 AND OVER 500 27 PT 78 PT

REDUCED INSPECTION:

UP THRU 1200 32 3-8 PT 15 PT

1201 THRU 3200 50 5-9 PT 18 PT

3201 THRU 10,000 80 8-12 PT 24 PT

10,001 THRU 35,000 125 11-15 PT 31 PT

35,001 AND OVER 200 15-53 PT 43 PT

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND VALUE HAS NOT BEEN EXCEEDED, ACCEPT THE LOT BUT REINSTATE NORMAL INSPECTION (SEE 6.4.4B). THE SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT VALUE.

TABLE III DELETE IN ITS ENTIRETY AND SUBSTITUTE: "TABLE III SAMPLING PROVISIONS FOR END ITEM VISUAL EXAMINATION OF UTILITY (U) TROUSERS:

NORMAL INSPECTION:

LOT SIZE SAMP SIZE MAX ACCP PT VALUE

3&2 PT 3.2.&1 PT

DEFECTS DEFECTS

UP THRU 500 50 9 PT 17 PT

501-1200 80 13 PT 20 PT

1201-3200 125 18 PT 29 PT

3201-10,000 200 25 PT 42 PT

10,001 & OVER 315 39 PT 62 PT

TIGHTENED INSPECTION:

UP THRU 500 50 5 PT 11 PT

501-1200 80 8 PT 17 PT

1201-3200 125 12 PT 25 PT

3201-10,000 200 19 PT 38 PT

10,001 & OVER 315 27 PT 57 PT

REDUCED INSPECTION:

3&2 PT /1 3,2&1 PT

UP THRU 1200 32 5-9 PT 16 PT

1201-3200 50 8-12 PT 20 PT

3201-10,000 80 11-14 PT 25 PT

10,001 & OVER 125 15-19 PT 29 PT

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND VALUE HAS NOT BEEN EXCEEDED, ACCEPT THE LOT BUT REINSTATE NORMAL INSPECTION (SEE 6.4.4B). THE SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT VALUE."

PAGE 26, UNDER "LABEL" DEFECT ADD THE FOLLOWING NEW DEFECT AND POINT VALUES:

"C. BAR CODE LABEL/TAG. D SD U

1. NOT READABLE BY SCANNER 1 1 1

2. HUMAN READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE.

1 1 1

3. NOT VISIBLE ON FOLDED, PACKAGED ITEM. 1 1 1

4. CAUSES DAMAGE TO THE ITEM. 3 3 3

ACCEPTABILITY OF LOTS SHALL BE DETERMINED BY THE USE OF "SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES", ANSI/ASQC Z1.4

GENERAL INSPECTION LEVEL 2

AQL's FOR PURCHASE DESCRIPTION

END ITEM DIMENSIONAL 4.0

VISUAL 6.5

PACKAGING

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

PRES/PACK LEVELS: A/B TO MIL-T-29452 CL-1

Thirty-five (035) Trousers

Palletization shall be in accordance with latest revision, MIL-STD-147E(1)is required.

PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE

The contractor shall stamp legibly with indelible ink the lot number on each end item and outer container in the lot.

Shipping container conforming to shall be in accordance with ASTM-D-5118

Commercial closure method cited in ASTM-D-1974 is acceptable except stapling.

Marking shall be in accordance with MIL-STD-129R and change notice 1.

In accordance with latest revision, MIL-STD-2073-1E(1).

image1.jpeg