0166-8707 SPECIFICATIONS.doc

SALIENT FEATURES THREE DIMENSIONAL IMAGING AND MEASUREMENT PLATFORM (JMLs xxxxxx through xxxxxxx)

Salient features for a three dimensional imaging and measurement platform to evaluate form, contour and roughness with traceable, calibrated measurements and digital imaging of surfaces over a wide area in a single platform. The capabilities are needed for metallurgical examinations including failure analysis of ships components, wear testing related to ongoing development of capability for cold spray applications and friction testing to provide data for the design of special systems for submarine applications. The capabilities to support Cold Spray procedure testing with data acquisition, analysis, and reports as required by UIPI 6320-901, COLD SPRAY, PROCESSES AND QUALITY CONTROL OF, is part of the innovation and technology insertion initiative (NAVSEA ser 00/558 20DEC18) that states the cold spray platform is critical. The use of calibrated measurement systems are required by the laboratory quality system. The minimum shipyard required features are digital image acquisition, roughness measurement of irregular surfaces and surface changes through comparison of three dimensional measurement images. System features must include digital image acquisition and precision dimensional data recording.

The following shall be included as part of the original cost (no extra charge):

· System capabilities include

· High-resolution digital microscopy.

· Wide area digital images up to 8 inches in width.

· Adjustable height for sensor position to accommodate tall samples; 5 inches tall minimum.

· Precision dimensional measurements in three dimension axis (X-Y-Z) with built-in user operated calibration function.

· Dimensional measurements of surfaces for wear, roughness, and contour analysis.

· High speed data acquisition.

· Reporting application for measurements and images with user report format control.

· Data analysis application for comparing and analyzing multiple surface measurement data sets to determine the differences in measured parameters between surfaces

· Calibration scale or stage micrometer with NIST traceability.

· 120 V power supply.

· PC software which provides control of digital imaging and precision dimensional measurements with data acquisition, data analysis and enhanced reports, to be installed on an industry-standard model PC or equivalent.

· The device shall communicate with a personal computer with a hardwire technology (PC connection cable) like USB connection. It cannot communicate with PC via wireless means i.e., WIFI, Bluetooth, GPS, etc. The device manufacture may disable wireless functions in order to meet this requirement.

· The software provided must be submitted for addition to the NAVSEA DADMS approval list prior to purchase.

· The device must be UL listed or subjected to third party NRTL certification. US equipment inspection/certification must include evaluation and testing of equipment in accordance with the applicable standards and/or regulations.

· Includes equipment and software technical Manuals in print or electronically

· Includes equipment warranty.