01189639-Stn Grd Dvc Slv Ordering Data.pdf
PDF 101 KB Posted
- Attached to
- SLEEVE, GROUNDING DEVICE. Federal contract opportunity
- Solicitation number
- SPMYM220Q2083
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 01189639 CDRLS.pdf | ||
| 01189613-Prop Cpl Slv Ordering Data.pdf | ||
| 01189613-Ser 05Z_055 22 Jan 20 Westley Sleeves.pdf | ||
| 20-Q-2083 SOLICITATION.pdf | ||
| 01189613 CDRLS.pdf | ||
| 01189639-Ser 05Z_055 22 Jan 20 Westley Sleeves.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-C-24723
IDN: N4523A 0118-9639
ICN: 7170519001 KO: S04 KOI: 055
Paragraph 6.2 Ordering Data
a. MIL-C-24723, Castings, Nickel-Copper Alloy, dated 07 Jun 1989
b. Quantity of castings required: 1
c. Shape and dimensions of casting to be supplied as specified by drawing, pattern, or sample: NAVSEA
Drawing Number 203-4678497 Revision L, piece number 4. Vendor shall machine to the following dimensions. 28.500 inches outside diameter, plus 0.063 inch, minus 0.000 inches. 26.150 inches inside diameter, plus 0.000 inches, minus 0.063 inch. 7.000 inches length, plus 0.063 inch, minus 0.000 inches.
DIMENSIONAL TOLERANCES
ROUNDNESS: The roundness of the inside diameter of the sleeve shall be within 0.031".
CONCENTRICITY: The inside diameter of the sleeve shall be concentric to the outside diameter of the sleeve within 0.031".
STRAIGHTNESS: The straightness of the sleeve measured along the length of the inside shall be within
0.031".
d. Composition required: M30C
e. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced: MIL-C-24723, 7 June 1989
f. When first article inspection is required: not required.
g. If centrifugal or static casting is required: centrifugal casting required.
h. If more than hardness is to be tested on M-25S: N/A.
i. Applicable standards, if other than MIL-STD-248 and MIL-STD-278: N/A.
j. Requirements for mechanical properties test for first article inspection: N/A.
k. Whether attached test bars are required: not required.
l. Sampling plan when 100 percent inspection is not required: N/A.
m. If castings are not to be inspected for soundness: Soundness inspection shall be in accordance with
S9074-AR-GIB-010/278A Table XIII Category D4 and as follows: Liquid penetrant inspection (PT) by vendor of all surfaces of rough machined casting per T9074-AS-GIB-010/271 Revision 1. Acceptance criteria for PT shall be per MIL-STD-2035A, CLASS 1.
n. Level of packaging required: commerical packing.
o. Special marking required: Marking shall be in accordance with paragraph 3.8.
Additional requirements:
Prepared By: Jordan Mize Code: 260V
File details come from the government source that posted it. Updated .