0118-9626 SOLE SOURCE_Redacted.pdf

ϒ

ϒ

ϒ

ϒ

A patent, copyright, or proprietary data limits competition. The proprietary data is:

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k) Ref: FAR 13.106(b)

The service or material listed on (Document number) 01189626 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: _MetalTek International

Manufacturer POC & Phone Nr. POC: Max Leibfried, PH# 262-544-8239

Mfr. Address: _905 East St. Paul Avenue Waukesha WI 53188-3839

Manufacturers Dealer/Rep:

Dealer/Rep Address/Phone Number:

✔Description of the item or service required, the estimated cost, and required delivery date.

1 (each) Centrifugally cast propeller shaft bearing sleeve. Material is ASTM-B-369, Alloy C96400. OD: 28.500” +0.063” / -0.000”. ID: 26.100” +0.000” / -0.063”. Length: 178.000” +0.250” / -0.000”. Estimated cost:

Required delivery date: 10/01/2020.

✔Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.). Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

Due to material failure of sleeves Shafting Technical Warrant Holder, has lost confidence in all commercial sleeve_ vendors with the exception of MetalTek International. This material is critical to achieve on time undocking of a strategic asset, the delay of which would cost

✔The requested material or service represents the minimum requirements of the Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

These are “direct replacements” parts/components for existing brand name equipment.

Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Contracting Officer Signature: Date:

DLA Maritime Puget Sound Justification for Sole Source 05/21/2018