0079-3346 ordering data.docx
DOCX document 13 KB Posted
- Attached to
- SPMYM2-20-Q-2119 Federal contract opportunity
- Solicitation number
- Not on record
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 20-Q-2119.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
350 AMP MULTI PROCESS WELDING POWER SUPPLY
ORDERING SPECIFICATINS
DOC # 0079-3346
1. Power supply must be able to be used with SMAW, DC GTAW, Pulsed DC GTAW, GMAW, Pulsed GMAW, and Flux Cored GMAW
2. Must be able to operate on input voltage of 208/230/380-415/460/575/1/3/50/60
3. Input current @ rated output shall be 3 Ph / 40% duty cycle: 39/35/19/17/14A and 1 Ph / 40% duty cycle: 60/61/NA/NA/NA A
4. Output range shall be from 5-350 Amps
5. Rated Output with GMAW process shall be 350A/31.5V/40% and 300A/29V/100%
6. Must be capable of at least 65 or more standard wave forms for optimal process performance
7. Must be capable of automatically adjusting input power single phase or three phase, from 200 to 600V, at 50 or 60 Hz while keeping welding output constant through the full input voltage range
8. Must be capable of operating in either CC or CV mode
9. Must have cloud based data collection capability to allow for viewing and analysis of welding power supply welding data such as equipment usage, weld data storage and fault limit configuration
10. Must offer 115V (10A) AC accessory power receptacle with surge protection to insure use of 115V tools don’t affect welding performance
11. Power supply case must be durable and able to endure heavy industrial environments (IP23 rating)
12. Must have standard Ethernet capability to allow software upgrades as needed
13. Must be Ethernet connectable with existing inventory of 350 amp multi process welding power supplies
14. Must come with a 10’ (3.0m) input power cord
15. Must offer waveform capability for pulse, pulse on pulse, and must be upgradeable future developed processes and process variations
16. Must be fully compatible with existing inventory of pulse and pulse on pulse process wire feeders and 350 amp multi process welding power supplies
17. Must be an inverter
18. Must come with a 3-year warranty extendable for an additional two years
19. Must be approved/certified by OSHA approved Nationally Recognized Testing Laboratory such as but not limited to CSA or UL.
20. Must have a thermal fault indicator light
21. Must have 35MM Dense output terminals
22. Must offer optional 115V (10 amp) AC duplex Auxiliary Power Receptacle and circuit breaker.
File details come from the government source that posted it. Updated .