SOW.docx

Statement of work I. General Information:

New vehicles are in need of aftermarket modifications to make them fully functional as field vehicles for use in collection of water science information. Listed below are characteristics and specifications required for the required aftermarket modifications. All characteristics and accessories are minimum standards and not to be considered an extensive list. The complete package should include all items necessary to make the additional accessories and vehicles fully usable and functional to the Center.

II. Work Requirement:

Equipment will be installed on two (2) 2017 Chevrolet K2500HD crew cab pickup trucks. These vehicles are to be used to perform field duties in the Virginia-West Virginia Water Science Center.

III. Supporting Information All materials are to be supplied by the contractor. The contractor must be experienced and qualified in all areas of installation associated with required aftermarket modifications. The work must be performed at the contractor’s facility. The contractor and facility must be within local commuting distance of the USGS office located in Richmond, VA. The truck will not be transported more than local commuting distance from the USGS office.

Brand Name or Equal Salient Characteristics for After Market Field Vehicle Modifications Technical requirements Deluxe Commercial Unit bed cap with vehicle matching paint Spray-on bedliner with chemical resistant non-slip textured surface 9,000 pound winch Winch brackets, mounting plates, and/or bumpers/guards integrated into front of vehicle Auxiliary power outlet mounted at rear of truck bed Extended bed slide with 100 percent extension and 1,500 pound capacity Ladder rack Safety lighting with 360 degree visibility and control panel operated from drivers compartment Step Nerf bars All labor associated with installation of listed accessories

Bed cap Height: cab height Color: Painted To Match Interior: No Skin Front Window: Window With Security Screen Rear Door: 1/2 Rear Door With Window Security Screen: Rear Door Security Screen Driver Side Options: Full Length Door Passenger Side Options: Full Length Door Driver Side Toolbox: Standard Toolbox Passenger Side Toolbox: Standard Toolbox Driver Side Toolbox Shelving: option #2 toolbox shelving Passenger Side Toolbox Shelving: option #2 toolbox shelving Rear door rope light Safety lighting 6 stobes 9,000 pound winch 9,000 pound capacity low-profile compact-body design remote control include mount and grill guard Bed slide 1,500 lb cargo capacity at full extension 100% extension ¾-inch ACX, 7-layer laminated wood deck coated with bed liner material 4-inch storage area beneath bed slide, accessible when the unit is in the extended position Spring-loaded locking mechanism Self-locking points every 12-18 inches 4-inch sealed slide bearings Ladder rack Durable 2" round tubing design Upper rails to keep cargo from shifting and provide grab loops at the rear of the truck Yellow zinc sealed & finished with black powder-coat paint Available for trucks with toppers Pre-drilled foot plates and an optional no-drill clamp-on mounting kit Removable rear cross bar Shall have extra tie downs on mounting posts Gusseted cross bars & 5" swaged joints provide extra strength Safety lighting Lights are to be amber LED strobes Truck must have 360 degree visible safety lighting: minimum of 2 front, 2 rear, and 2 per side.

Control panel mounted inside vehicle accessed from the driver’s side.

Nerf running boards Black 3” step nerf running