SOW.docx

Statement of Work 75th Ranger Regiment Fort Benning, GA

LIN001: RANGVILL from Strategic Operations Modular Training Range Village 1 unit Shall consist of:

- One (1) each 12 ft x 16 ft Model A RHU, part number RHU-12X16-A

- One (1) each 16 ft x 20 ft L-shape 1st floor with 8 ft x 12 ft 2nd floor Model A with parapet, part number RHU-16x20L-8X12-2ST-A

- One (1) each 12 ft x 32 ft 1st floor with 12 ft x 16 ft 2nd floor Model A with parapet, part number RHU-12X32-12X16-2ST-A

- Walled compound that is approximately 42 ft x 46 ft. Wall is 10 ft high and approximately one (1) foot wide at the top and 30 inches at the base. Each wall section is eight (8) ft long (see attached pictures). Tops of walls will be reinforced to accommodate ladder training. Texture to match the RHUs. The columns are internal to the wall sections. Compound walls include: • Nine (9) each wall sections, part number 10FTCW

• Two (2) each wall corners, part number 10FTWC

• Two (2) each pedestrian gates, part number PEDGATE

• 13 each columns, part number 2FTGP

All structures will have a minimum of two doors and two windows. All structures 12x16 and greater will have at least one internal wall thereby creating rooms inside the structures.

LIN002: DELIVERY AND INSTALLATION AT 3RD RANGER BATTALION FORT BENNING, GA 31905

Any substitutions shall have the following minimum characteristics:

· Light weight and assembled with only one tool and with the use of minimal installation personnel. Each panel weighs no more than 100 pounds.

· No foundations or site preparation required

· Adjustable legs to accommodate uneven terrain

· Designs meet US Occupational Safety and Health Administration (OSHA) design and safety standards

· Items faithfully replicate geographic region chosen by the client with at least six (6) exterior texture options available to choose from

· Ability to secure windows and doors to preclude animal infestation

· Various internal set dressing options

· Products provided must be compatible with interchangeable parts for form, fit and function with existing Re-locatable Habitat Unit training aids

· When disassembled all panels shall be stackable on standardized (no more than 4 ft x 8 ft) pallets for ease of transportation

· Material and installation must complete within 90 days

· Structures certified by a licensed structural engineer, meet US OSHA standards for safety and rated for 90 mph winds

· Offeror must provide several pictures to support technical proposal and provide proof of concept

· Different sized window options and style must be provided with the offer

· Interior stairs for access to the second story

· Waterproof roof system

· Exterior doors must have door hardware that will withstand repeated breaching without breaking

· Offeror must submit a design concept with their offer for at least three (3) multi-sized multi-story structures. Two (2) of the structures will form a portion of the compound wall and the other structure will be located inside the compound. The multi-story structures will be two (2) stories with a smaller structure on the second story thereby creating a balcony area with a corresponding parapet railing.

· The compound walls will be a minimum of 10 ft tall and be angular in shape such that the top width is smaller than the bottom width. The compound will be approximately 42 ft x 46 ft with a minimum of two (2) gates.

· If so desired the modular and portable training aid must have the capability of being temporarily anchored to the ground.