Satin Cloth
The RFP will be for the purchase of the following: NSN: 8305-01-035-1058 ITEM: Satin Cloth Quantity (YDS): Base plus two one year option terms: Min- 12,000, AEQ- 36,000, AOLQ 45,000 Two 100% mandatory term options will be included. Offers will be based on FOB destination to VSGX Arizona Industries for the Blind. Production lead time is 90 days after date of award or issuance of the delivery order. Specification MIL-C-24576A dated July, 1987, and amendment 01 dated January 13, 1988. CLOTH, SATIN. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES INDIVIDUAL NSN DATA. NSN 8315-01-035-1058, PGC11311. ITEM NAME: CLOTH, SATIN PART NUMBER: MIL-C-24576 CAGE CODE: 81349. Shall be in accordance with (IAW) Military Specification MIL-C-24576A (SH), CLOTH, SILICA GLASS; CLOTH, COATED, GLASS, SILICONE RUBBER COATED dated 27 July 1987 and Amendment 1 dated 13 January 1988.. ADDITIONAL INFORMATION FOR MIL-C-24576A: THE CLOTH SHALL BE MADE IN ACCORDANCE WITH MIL-C-24576A, DATED 27 JULY 1987 AND AM. NO. 1, DATED 13 JAN 1988. CHANGES TO AMENDMENT #1: 3.7.1.1, DELETE IN ITS ENTIRETY 3.7.2.1, DELETE IN ITS ENTIRETY. INTERIM SPECIFICATION CHANGES TO MIL-C-24576A PAGE 4 FOR TYPE I CLOTH ONLY THE FOLLOWING APPLIES TABLE I, UNDER CLASS I, DELETE "94.0" AND SUBSTITUTE "96". TABLE I, UNDER CLASS 2, DELETE 94.0 AND SUBSTITUTE "96". TABLE I, LINE 3, AFTER "SILICA CONTENT, PERCENT" ADD "2/". LINE 10, AFTER "31-39" AND "17-21" ADD "2/". ADD NEW FOOTNOTE: "2/ CONTRACTOR IS NOT REQUIRED TO MEET THIS REQUIREMENT WHEN A CONTINUOUS PROCESS IS USED TO COAT THE UNCOATED OR UNTREATED TYPE I, CLASS 1 AND CLASS 2 CLOTHS.". PAGE 5 TABLE II, ADD NEW REQUIREMENT: "SILICA CONTENT, PERCENT 2/; 96.0 MIN; 96.0 MIN;---". LINE 5, UNDER "COLOR" PROPERTY FOR THE TYPE III CLOTH DELETE"RED/BLACK" AND SUBSTITUTE "BLACK" ADD NEW FOOTNOTE: "2/CONTRACTOR IS NOT REQUIRED TO MEET THIS REQUIREMENT WHEN A CONTINUOUS PROCESS IS USED TO COAT THE TYPE I, CLASS 1 AND CLASS 2 CLOTHS.". 3.5, DELETE AND SUBSTITUTE"3.5 LENGTH. THE CLOTH SHALL BE PROVIDED IN ROLLS OF 25 YARDS MAXIMUM IN LENGTH. ROLLS SHALL CONTAIN NOT MORE THAN TWO PIECES, AND NO INDIVIDUAL PIECE SHALL BE LESS THAN 6 YARDS" 3.6 DELETE AND SUBSTITUTE: "3.6 NONCOMBUSTIBILITY. THE TYPE I AND III CLOTHS SHALL BE CERTIFIED AS SPECIFIED IN 3.7.1.1 AND 3.7.2.1 (SEE 4.7)." 3.7.1.1 DELETE AND SUBSTITUTE: " 3.7.1.1 COLOR OF TYPE I. WHEN SPECIFIED (SEE 6.2.1) CLASS 1 AND 2 CLOTH SHALL BE RED OR BLACK. OTHERWISE THE COLOR OF TYPE I TREATMENT SHALL BE NATURAL WITH NO ADDED PIGMENTATION. THE COLORING SHALL RETAIN ITS PERMAENCE DURING NORMAL HANDELING, AND SHALL BE NON-TOXIC, FLAME RESISTANT AND NONCOMBUSTIBLE AS SPECIFIED IN 3.6 (SEE 6.1.3) PAGE 6, 3.7.1 DELETE AND SUBSTITUTE: "3.7.1 COLOR OF TYPE III. THE TYPE III CLOTH SHALL BE BLACK (SEE 6.2.1) THE COLORING SHALL RETAIN ITS PERMANENCE DURING NORMAL HANDLING. THE COLORING AGENT SHALL BE NON TOXIC, FLAME RESISTANT, AND NONCOMBUSTIBLE AS SPECIFIED IN 3.6 (SEE 6.1.3." PAGE 6, PARAGRAPH 3.9, LINE 2, DELETE "SHEET" AND SUBSTITUTE "ROLL"; LINE 3 - AFTER "(A)" DELETE "NON-ASBESTOS" AND SUBSTITUTE "ASBESTOS- FREE"; LINE 8, DELETE "ON EVERY SQUARE FOOT, OR LESS," AND SUBSTITUTE "AT LEAST EVERY YARD". PAGE 8 PARA. 4.4.4.2 YARD-BY-YD EXAMINATION LINE 9 DELETE "2.5" AND SUBSTITUTE "1.5", DELETE "6.5" AND SUBSTITUTE "4.0". PAGE 8 PARA. 4.4.4.3.1 INDIVIDUAL ROLLS, LINE 7, DELETE "4.0" AND SUBSTITUTE "2.5". PAGE 9 TABLE V, LINE 4, SILICA CONTENT, UNDER THE "REQUIREMENT COLOUM AFTER "TABLE I" ADD "AND II" PARA. 4.5, TABLE V, "RESULTS REPORTED TO THE NEAREST" COLUMN, LINE 13, UNDER "WIDTH" REQUIREMENT, DELETE "0.001 INCH" AND SUBSTITUTE "1/16 INCH". LINE 14, UNDER "LENGTH" REQUIREMENT, DELETE "0.001 INCH" AND SUBSTITUTE "1/4 YARD". 4.5.1, LINE 4, DELETE "2 YARDS" AND SUBSTITUTE "3 YARDS". PAGE 11 AFTER 6.1.2, ADD NEW PARAGRAPH: "6.1.3 COLOR. BLACK PIGMENT ZINC OXIDE, WHEN USED TO PRODUCE A BLACK CLORED GLASS CLOTH, AND RED IRON OXIDE WHEN USED TO PROCURE A RED COLORED GLASS CLOTH, HAVE BEEN SUCESSFUL IN MEETING THE NON TOXIC, FLAME RESISTANT, AND NONCOMBUSTIBLE REQUIREMENTS. Intended for use in protecting equipment and personnel from spatter from metal welding and heavy cutting operations. Suitable for stress-relieving operations. Type 1, Class 1 material is a pliable heavyweight fabric, which provides thermal protection against metal encountered during welding or heavy cutting operations. Width: 35 to 38 inches including selvage Environmental protection: Abrasion resistant, fire resistant, and mildew resistant Cloth Weight: 31 ounces per square yard minimum and 39 ounces per square yard maximum. Fiber material: Glass basic Color: (natural, with no added pigmentation, both sides Roll Length: Not to exceed 25 yards Thickness (treated or coated cloth): 0.040 inches minimum to 0.062 inches maximum Weave: 8 or 12 harness satin Procurement Group Code (PGC): 11311 Type: I (Silica glass) Class: 1 (Heavyweight). Unit of issue is a YARD (YD). WHEN REQUIRED, TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH DPSCM-4155.3 ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED, INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT. RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION, EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES CONFORM TO PRESCRIBED REQUIREMENTS. ADDITIONAL INFORMATION FOR MIL-Y-1140: INTERIM CHANGES TO MIL-Y-1140H: Page 3, Paragraph 2.1, Delete the first paragraph and substitute the following: 2.1 and 2.1.1: "2.1 Government Documents. 2.1.1 Specifications and standards. Unless otherwise specified (see 6.2), the following specifications and standards of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation, form a part of this specification to the extent specified herein." Page 3, Under SPECIFICATIONS, Federal, Delete title opposite UU-P-268 and substitute "Paper, Kraft Wrapping." Page 4, Under STANDARDS, MILITARY add the following: "MIL-STD-147, Palletized Unit Loads" Page 4, Delete "PPP-B-591, Boxes, Fiberboard Wood-cleated" and substitute "PPP-B-591, Boxes, Shipping, Fireboard, Wood-Cleated." Page 4, Delete parenthetical source paragraph and substitute the following: "(Copies of specifications and standards required by manufacturers in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting officer)." Page 4, Delete paragraph 2.2 and substitute the following new paragraph 2.2:"2.2 Other publications. The following document(s) form a part of this specification to the extent specified herein. The issues of the documents which are indicated as adopted shall be the issue listed in the current DoDISS and the supplement thereto, if applicable." Page 4, Add the following industry document: "AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ASTM D 3951-82 Commercial, Packaging (Applications for copies of ASTM publications should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103)." Page 4, Add the following new paragraph: "2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence." Page 26, Paragraph 4.1, line 2 and line 4, delete "supplier" and substitute "contractor." NOTE - REDUCED AQLS APPLY AS FOLLOWS: PAGE 26, PARA 4.2.1.1, LINE 11, DELETE "0.65 MAJOR AND 2.5 TOTAL" AND SUBSTITUTE, "0.45 MAJOR AND 1.50 TOTAL". LINE 12, DELETE "2.5 MAJOR AND 6.5" AND SUBSTITUTE, "1.5 MAJOR AND 4.0". Page 32, Paragraph 5., Delete "PREPARATION FOR DELIVERY" and substitute "PACKAGING." Page 32, Paragraph 5.1, Delete in its entirety and substitute the following: "5.1 Packaging. Packaging shall be Level A or Commercial as specified (see 6.2)." Page 32, Paragraph 5.1.2, Delete in its entirety and substitute the following: "5.1.2 Commercial. The commercial preservation of the glass fiber material shall be in accordance with the requirements of ASTM D 3951." Page 32, Paragraph 5.2, Delete in its entirety and substitute the following: "5.2 Packaging. Packing shall be Level A, B, or Commercial (see 6.2)." Page 34, Paragraph 5.2.3, Delete in its entirety and substitute the following: "5.2.3 Commercial. The preserved glass fiber material shall be packed in accordance with the requirements of ASTM D 3951." Page 34, Add the following new paragraph 5.4: "5.4 Palletization. When specified (see 6.2), unitized loads, commensurate with the level of packing specified in the contract or order, shall be palletized in accordance with MIL-STD-147. Palletized loads shall be uniform in size and quantities to the greatest extent possible. If the container is of a size which does not conform to any of the pallet patterns specified in MIL-STD-147, the pallet pattern used shall first be approved by the contracting officer." Page 34, Paragraph 6.2, Delete in its entirety and substitute the following new paragraph 6.2 and 6.2.1: "6.2 Ordering data. 6.2.1 Acquisition requirements. Acquisition documents should specify the following: (a) Title, number, and date of this specification. (b) Material designation (see 1.3). (c) Width of cloth required (see 3.2.4.4). (d) Selection of applicable levels of packaging and packing (see 5.1 and 5.2). (e) When weather-resistant grade fiberboard shipping containers and panels are required for level B packing (see 5.2.2.1). (f) When palletization is required (see 5.4)." THE FOLLOWING CHANGES APPLY WHEN FORM 4, CLASS C IS SPECIFIED- STANDARD PUT-UP APPLICABLE TO .58 OZ TO 7.25 OZ PER SQ. YD. - 250 YDS +- 25 YDS PER ROLL 8.7 OZ TO 13.98 OZ PER SQ. YD. - 125 YDS +- 25 YDS. PER ROLL 16 OZ TO 18 OZ. PER SQ. YD. - 75 YDS. +- 15 YDS. PER ROLL OVER 18 OZ PER SQ. YD. - 50 YDS. +- 10 YDS PER ROLL. . . FED-STD-595C, COLORS USED IN GOVERNMENT PROCUREMENT, AND ALL ASSOCIATED SLASH SHEETS HAVE BEEN CANCELLED (FEBRUARY 14, 2017) AND SUPERSEDED BY SAE AMS-STD-595. ADDITIONAL INFORMATION FOR SAE AMS-STD-595: COPIES OF SAE AMS-STD-595 CAN BE OBTAINED FROM: WEBSITE: STORE.SAE.ORG/EA/ TELEPHONE: 877-606-7323 (INSIDE USA AND CANADA) +1 724-776-4970 (OUTSIDE USA) MAIL: SAE CUSTOMER SERVICE 400 COMMONWEALTH DRIVE WARRENDALE, PA 15096-0001 . ADDITIONAL INFORMATION FOR FED-STD-191: FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM SPECIFICATION FOR REPLACEMENT ASTM. INTERIM CHANGES TO FED-STD-191A: TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE". TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91". THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED. THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN BASIC OR ANY REFERENCED DOCUMENT. METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE." METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER." PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40 MINUTES OR UNTIL SAMPLES ARE DRY." METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1, PARA. 4: DELETE "APPARTUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA. 5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY". PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER "TO" ADD "+-". PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY. NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT NECESSARY." PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE SPECIMEN DID" IN ITS ENTIRETY. PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED." PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE: "REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS." PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE." PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE WITH "406D". AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY FOR THE TEST." (Ref. T0215). DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS. PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH 2000. LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS a. This solicitation/award consists of the following documents, exhibits, and other attachments b. DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements dated October 2018, which has superseded DSCPM 4155.3, QUALITY SYSTEMS REQUIREMENTS, dated NOVEMBER 3, 1997. 52.246-11 Higher-Level Contract Quality Requirement (Feb 1999) ANSI/ISO/ASQ Q9001-2015(excluding para 7.3) or equivalent. Certification or registration of a contractor's quality system or program is not required by DoD if ISO or ANSI/ASQ standards are used.. 52.246-15 CERTIFICATE OF CONFORMANCE REVIEW OF THIS ITEM HAS DETERMINED THAT THE SPECIFICATIONS, STANDARDS, PRODUCT DESCRIPTIONS OR OTHER TECHNICAL DATA APPLICABLE TO THIS PROCUREMENT ACTION DO NOT REQUIRE THE USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS) OR ODC(S). Questions may be directed to Matthew Leistner at 215-737-2966 matthew.leistner@dla.mil or Scott Kromis scott.kromis@dla.mil The Solicitation will be issued with a 30 day advertising period The solicitation will be issued as an un-restricted acquisition..
SPE1C1-19-R-0038 Defense Logistics Agency Troop Support Clothing and Textiles
1/31/19, 9:56 AM