F108 Power Management Control
Added: Jul 28, 2017 11:26 am This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice and attached documents. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued except for pricing of the basic year and options, which can be found as an attachment to this document. This solicitation document, incorporated provisions and clauses are those in effect tough Federal Acquisition Circular (FAC) 2005-78, Effective 26 Dec 2014. •1. The Purchase Request number is FD2030-16-00909. •2. The solicitation number is for FA8122-17-R-0017. •3. The solicitation is a request for proposal (RFP). •4. Proposals will be received at the issuing office until 3:00 PM Central Standard Time on 28 August 2017. •5. Anticipated award date will be 28 September 2017. •6. The proposed contract is a sole source requirement to BAE System Services (Cage:63760)•7. This is a routine requirement.•8. Current Qualified Sources are BAE System Services (Cage 63760),Any other qualified businesses may submit a Source Approval Request (SAR) in order to be considered for award. Please coordinate SAR packages tough the following address: AFSC/SB Coordination Records <ocalc.bc.records@us.af.mil> •9. Award will be made only if an offeror meets qualification requirements at the time of award IAW FAR clause 52.209-1 (full text listed below). Contract award will not be delayed to allow an offeror completion of qualification requirements/process. Interested persons may identify their interest and capability to respond to the requirement or submit proposals.•10. This solicitation document incorporates provisions and clauses that are in effect in the Federal Acquisition Regulations and supplements on the date the solicitation is issued. •11. The North American Industry Classification System Code (NAICS) is 336412.•12. This is an export controlled requirement - "FOREIGN OWNED FIRMS ARE ADVISED TO CONTACT THE CONTRACTING OFFICER/BUYER BEFORE SUBMITTING A PROPOSAL TO DETERMINE WHETHER THERE ARE RESTRICTIONS ON RECEIVING AN AWARD". •13. Technical Engineering Data Package for RFP is available at www.fbo.gov . The Contractor is required to be "Export Controlled" certified to receive and view the drawings for this combined synopsis/solicitation. To become certified, register at the website www.dlis.dla.mil/jcp (for guidance, go to FAQ).14. The United States Air Force tough AFSC/ PZAAB at Oklahoma City Logistics Center (OC-ALC) is contemplating to procure repairs of the Line Items cited below for a Firm Fixed Price (FFP) Requirements contract. Line Item 0001- 3001: Input NSNs: 2915-01-139-6619PN; 2915-01-286-5565PN; Output NSNs: 2915-01-286-5565PN; Input P/N: 7084M61G01/G02/G03/G04/G05/G06 and 7157M61P04/P06; Output PN: 7084M61G06 and 7157M61P06; Noun: Control, Power Manag; BEQs: Basic -1 Ea. OY1 - 1 Ea. OY2 - 1 Ea. OY3 - 1 Ea. Required Delivery: 1 each delivered 30 days after receipt of order or after receipt of asset, and 1 each every 30 days thereafter. Early delivery is acceptable. Line Item 0002-3002: Input NSNs: 2915-01-139-6619PN; 2915-01-286-5565PN; Output NSN: 2915-01-286-5565PN; Input P/N: 7084M61G01/G02/G03/G04/G05/G06 and 7157M61P04/P06; Output P/N: 7084M61G06 and 7157M61P06; Noun: Control, Power Manag; BEQs: Basic -85 Ea. OY1 - 85 Ea. OY2 - 85 Ea. OY3 - 85 Ea. Required Delivery: 10 each delivered 45 days after receipt of order or after receipt of asset, and 10 each every 45 days thereafter. Early delivery is acceptable. Line Item 0003-3003: Over & Above Input NSNs: 2915-01-139-6619PN; 2915-01-286-5565PN; Output NSN: 2915-01-286-5565PN; Input P/N: 7084M61G01/G02/G03/G04/G05/G06 and 7157M61P04/P06; Output P/N: 7084M61G06 and 7157M61P06; Noun: Control, Power Manag; BEQs: Basic -TBN OY1 - TBN OY2 - TBN OY3 - TBN Required Delivery: 1 each per PCO Approval/Instructions. Early delivery is acceptable. Line Item 0004-3004: DATA - NSN; BEQ: 1 Lt Required Delivery: 1 Lot IAW Basic Contract. Early delivery is acceptable. Inspection and Acceptance of All Line Items shall be FOB Origin. Inspection andAcceptance Report is WAWF. Applicable to the F108 Engine, KC-135 Aircraft. Ship To: SW3211 DEF DISTRIBUTION DEPOT OF OKLAHOMA CEN REC 3301 F AVE Bldg 506 Door 22 Tinker AFB, OK 73145 United States Packaging Requirements: Each Item shall be packed in accordance with the attached AFMC form 158 - Packaging Requirements - for each coordinating NSN. DESCRIPTION: This requirement is for the visual inspection and repaired to a serviceable condition. Repair requirements In Accordance With (IAW) Commercial Maintenance Manual and service bulletins identified in the Performance Work Statement (PWS). The instructions allow the Contractor's own processes to be used to enable added value to the repair process. The Contractor is responsible for the repair and delivery of a quality product, while meeting the Government's required delivery schedule. This contract is considered a Contractor Furnished Material (CFM) and Contractor Furnished Equipment, (CFE) meaning the Contractor shall furnish all labor, repair parts, materials, tooling and test equipment to repair, overhaul, and test the Master and sub NSNs listed on the preface sheet so as to restore to original dimensional and operational configuration. AMC: R5/C. Electronic procedures will be used for this solicitation tough FedBizOpps at http://www.fbo.gov. The following FAR provisions and clauses apply to this solicitation and are incorporated by reference. FAR 52.203-3 Gratuities (APR 1984) (10 U.S.C. 2207)FAR 52.203-6 Restrictions on Subcontractor Sales to the Government (Sep 2006), with Alternate I (Oct 1995), (41 U.S.C. 253g and 10 U.S.C. 2402)FAR 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509).FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2013)FAR 52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)FAR 52.209-6 Protecting the Government's Interest When Subcontracting withContractors Debarred, Suspended, or Proposed for Debarment (Aug 2013) (31 U.S.C. 6101 note);FAR 52.209-7 Information Regarding Responsibility Matters (Apr 2010)FAR 52.209-8 Updates of Information Regarding Responsibility Matters (Deviation) (Oct 2010)FAR 52.209-9, Updates of Publicly Available Information Regarding ResponsibilityMatters (Jul 2013) (41 U.S.C. 2313);FAR 52.211-14 -- Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use. (Apr 2008);FAR 52.211-15 -- Defense Priority and Allocation Requirements (Apr 2008)FAR 52.212-1 -- Instructions to Offerors -- Commercial Items (Jun 2008)FAR 52.212-2 -- Evaluation -- Commercial Items (Jan 1999)FAR 52.212-3, Offerors, Representations and Certifications-Commercial Items (Jan 2011) A completed copy of the Offeror Representations and Certifications must be included with the proposal unless the offeror is registered in ORCA;FAR 52.212-4, Contract Terms and Conditions-Commercial Items (Jun 2010);FAR 52.212-5, Contract Terms and Conditions Required to Implements Statues or Executive Orders-Commercial Items (Jun 2014);FAR 52.216-18 ORDERING (OCT 1995);FAR 52.216-19 ORDER LIMITATIONS (OCT 1995);FAR 52.216-21 REQUIREMENTS (OCT 1995) and Alt I (Apr 1984);FAR 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)FAR 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)FAR 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Jan 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a);FAR 52.219-8 Utilization of Small Business Concerns (May 2014)FAR 52.219-9 Small Business Subcontracting Plan (Jul 2013) and Alt II (Oct 2001);FAR 52.219-16 Liquidated Damages-Subcontracting Plan (Jan 1999);FAR 52.219-28 Post Award Small Business Program Re-representation (Jul 2013) (15U.S.C. 632(a) (2));FAR 52.222-1 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (FEB 1997)FAR 52.222-3 Convict Labor (June 2003) (E.O. 11755).FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Jul 2010)FAR 52.222.21 Prohibition of Segregated Facilities (Feb 1999);FAR 52.222-26, Equal Opportunity (Mar 2007);FAR 52.222-35 Equal Opportunity for Veterans (Sep 2010)FAR 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010);FAR 52.222-37, Employment Reports on Veterans (Sep 2010);FAR 52.222-50 Combating Trafficking in Persons (Feb 2009) and Alt I (Aug 2007);FAR 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C.351, et seq.).FAR 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.).FAR 52.222-54, Employment eligibility Verification (Jan 2009).FAR 52.222-99 Notification of Employee Rights Under the National Labor Relations Act (Jun 2010) Deviation;FAR 52.223-11 OZONE-DEPLETING SUBSTANCES (MAY 2001);FAR 52.223-18 Contractor Policy to Ban Text Messaging While Driving (Sep 2010)FAR 52.225-13 Restriction on Certain Foreign Purchases (Jun 2008);FAR 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L.110-247). Flow down required in accordance with paragraphs (e) of FAR clause 52.226-6;FAR 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003);FAR 52.233-3, Protest After Award (Aug 1996) (31 U.S.C 3553);FAR 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note));FAR 52.237-11 Accepting and Dispensing of $1 Coin (Sep 2008);FAR 52.246-11 Higher-Level contract Quality Requirement (Feb 1999) ISO 9001-2000 IAW PWS Para 1.6 (24 Apr 2008);FAR 52.246-16 Responsibility for Supplies (Apr 1984)FAR 52.247-1 Commercial Bill of Lading Notations (Feb 2006)FAR 52.247-30 F.O.B. Origin, Contractor's Facility (Feb 2006)FAR 52.247-47 Evaluation - F.O.B. Origin (Jun 2003);FAR 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64;FAR 52.247-65 F.O.B. Origin, Prepaid Freight - Small Package Shipments (Jan 1991)FAR 52.252-4, Alterations in Contract (Apr 1984);FAR 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (Sep 2011)DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights (Sep 2009)DFARS 252.204-7008 Export-controlled Items (Apr 2010)DFARS 252.205-7000 Provision of Information to Cooperative Agreement Holders (Dec 1991)DFARS 252.211-7003 Item Identification and Valuation (Aug 2008)DFARS 252.212-7001, Contract Terms and Conditions Required to Implements Statues or Executive Orders Applicable to Defense Acquisitions of Commercial Items (Dec 2010)DFARS 252.219-7003 Small Business Subcontracting Plan (DoD Contracts) (APR 2007) (15 U.S.C.637). (DAR Tracking # 2008-O0008 specifies use of class deviation 252.219-7003 dated Feb 2009)DFARS 252.225-7000, Buy American Act-Balance of Payments Program Certificate (Dec 2009);DFARS 252.225-7001, Buy American Act and Balance of Payments Program (Jan 2009);DFARS 252.225-7002 Qualifying Country Sources as Subcontractors (Apr 2003);DFARS 252.225-7005 IDENTIFICATION OF EXPENDITURES IN THE UNITED STATES (JUN 2005)DFARS 252.225-7012 Preference for Certain Domestic Commodities (Jun 2010)DFARS 252.225-7013 DUTY-FREE ENTRY (DEC 2009)DFARS 252.225-7008 Restriction on Acquisition of Specialty Metals (Jul 2009)DFARS 252.225-7009 Restriction on Acquisition of Certain Articles Containing Specialty Metals (Jun 2013)DFARS 252.225-7028, Exclusionary Policies and Practices of Foreign Government (Apr 2003)DFARS 252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns (Sep 2004);DFARS 252.229-7000 INVOICES EXCLUSIVE OF TAXES OR DUTIES (JUN 1997)DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (Mar 2008)DFARS 252.232-7010 Levies on Contract Payments (Dec 2006)DFARS 252.237-7019 Training for Contractor Personnel Interacting With Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375)DFARS 252.243-7002 Requests for Equitable Adjustment (Mar 1998);DFARS 252.247-7003, Pass-Tough of Motor Carrier Fuel Surcharge Adjustment to the cost Bearer (JUL 2009) (Section 884 of Public Law 110-417);DFARS 252.247-7023 Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631).DFARS 252.247-7024 Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631).5352.201-9101 Ombudsman (Apr 2010) (IAW AFFARS 5301.9103)5352.223-9000 ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODSs) (APR 2003);5352.225-9000 LAW COVERING CONTRACTS (AFMC) (OCT 2008);5352.225-9001 ENGLISH LANGUAGE REQUIREMENTS (AFMC) (OCT 2008);5352.227-9002 VISIT REQUESTS BY FOREIGN-OWNED OR CONTROLLED FIRMS (AFMC) (JUL 1997);5352.232-9002 TRANSPORTATION APPROPRIATION CHARGEABLE (AFMC) (OCT 2008);5352.247-9009 MILITARY PACKAGING AND MARKING (AFMC) (AUG 2002);5352.247-9019 FAST TRANSPORTATION (AFMC) (APR 2001)INSPECTION AND ACCEPTANCE (SEP 1999) (IAW FAR 46.401(b), FAR 46.503);F.O.B. ORIGIN (OCT 1993)(IAW FAR 47.305(b)) ADDENDUM TO CLAUSE 52.212-4 5352.201-9101 OMBUDSMAN (AUG 2005)(IAW AFFARS 5301.9103)(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern.(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).(c) If resolution cannot be made by the contracting officer, concerned parties may contact the Center/MAJCOM ombudsmen, OC-ALC/PKC at 405 736 -3273. Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067.(d) The ombudsman has no authority to render a decision that binds the agency.(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (Applicable to all solicitations and contracts) DFARS 252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (JAN 2009) (IAW DFARS 203.970)(Applicable to all solicitations and contracts) FAR 52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)(IAW FAR 9.206-2)(a) Definition: "Qualification Requirement," as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award.(b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list. Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate their abilities to meet the standards specified for qualification. Item No Agency Name/Address0001-4001 DEPARTMENT OF THE AIR FORCEBLDG 3001 SUITE 2AH82ATINKER AFB, OK 73145-3015(405) 734-4631Caroline.rozek@tinker.af.mil 0002-4002 DEPARTMENT OF THE AIR FORCEBLDG 3001 SUITE 2AH82ATINKER AFB, OK 73145-3015(405) 734-4631Caroline.rozekl@tinker.af.mil 0003-4003 DEPARTMENT OF THE AIR FORCEBLDG 3001 SUITE 2AH82ATINKER AFB, OK 73145-3015(405) 734-4631Caroline.rozek@tinker.af.mil 0004-4004 DEPARTMENT OF THE AIR FORCEBLDG 3001 SUITE 2AH82ATINKER AFB, OK 73145-3015(405) 734-4631Caroline.rozek@tinker.af.mil (c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.Offeror's Name ______________________________Manufacturer's Name _________________________Source's Name ______________________________Item Name _________________________________Service Identification _________________________Test Number _______________________________ (to the extent known)(d) Even though a product or service subject to a qualification requirement is not itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract. This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate this contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests.(e) If an offeror, manufacturer, source, product, or service has met the qualification requirement but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interest, award of this contract shall not be delayed to permit an offeror to submit evidence of qualification.(f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award. (Applicable when the acquisition is subject to a qualification requirement) FAR 52.216-18 ORDERING (OCT 1995)(IAW FAR 16.506(a))(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from date of award tough a twelve month period and four additional 12 month periods may be added if all options are exercised.(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.(c) If mailed, a delivery order or task order is considered "issued" when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule.(Applicable to all orders issued hereunder) FAR 52.216-19 ORDER LIMITATIONS (OCT 1995) (IAW FAR 16.506(b))(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity of 1, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.(b) Maximum order. The Contractor is not obligated to honor--(1) Any order for a single item in excess of not more than 25% of the annual BEQ amount;(2) Any order for a combination of items in excess of Combined annual BEQs; or(3) A series of orders from the same ordering office within 10 days that together call for quantities exceeding the limitation in subparagraph (b) (1) or (2) of this section.(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 10 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.(Applicable to all orders issued hereunder) FAR 52.216-21 REQUIREMENTS (OCT 1995) (IAW FAR 16.506(d) (1))(a) This is a requirements contract for the supplies or services specified and effective for the period stated, in the Schedule. The quantities of supplies or services specified in the Schedule are estimates only and are not purchased by this contract. Except as this contract may otherwise provide, if the Government's requirements do not result in orders in the quantities described as "estimated" or "maximum" in the Schedule, that fact shall not constitute the basis for an equitable price adjustment.(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. Subject to any limitations in the Delivery-Order Limitations clause or elsewhere in this contract, the Contractor shall furnish to the Government all supplies or services specified in the Schedule and called for by orders issued in accordance with the Ordering clause. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.(c) Except as this contract otherwise provides, the Government shall order from the Contractor all the supplies or services specified in the Schedule that are required to be purchased by the Government activity or activities specified in the Schedule.(d) The Government is not required to purchase from the Contractor requirements in excess of any limit on total orders under this contract.(e) If the Government urgently requires delivery of any quantity of an item before the earliest date that delivery may be specified under this contract, and if the Contractor will not accept an order providing for the accelerated delivery, the Government may acquire the urgently required goods or services from another source.(f) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided that the Contractor shall not be required to make any deliveries under this contract after completion of the last order issued.(Applicable to all orders issued hereunder) FAR 52.216-21 REQUIREMENTS -- ALTERNATE I (APR 1984) (IAW FAR 16.506(d) (2))(Applicable to all orders issued hereunder) FAR 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999) (IAW FAR 17.208(f))The Contracting Officer may exercise the option by written notice to the Contractor within 30 Days.(Applicable to all orders issued hereunder) FAR 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) (IAW FAR 17.208(g))(a) The Government may extend the term of this contract by written notice to the Contractor within 1 Day; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 66 months.(Applicable when the Government gives the contractor a preliminary written notice of its intent to extend the contract, or an extension of the contract includes an extension of the option or there is a specified limitation on the total duration of the contract) FAR 52.222-1 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (FEB 1997) (IAW FAR 22.103-5(a)) (IAW FAR 22.101-1(e) Applicable when the head of the contracting activity designates programs or requirements for which it is necessary that contractors be required to notify the Government of actual or potential labor disputes that are delaying or teaten to delay the timely contract performance (see 22.103-5(a)). FAR 52.223-11 OZONE-DEPLETING SUBSTANCES (MAY 2001)(IAW FAR 23.804(a))(a) Definition. "Ozone-depleting substance," as used in this clause, means any substance the Environmental Protection Agency designates in 40 CFR part 82 as--(1) Class I, including, but not limited to, chlorofluorocarbons, halons, carbon tetrachloride, and methyl chloroform; or(2) Class II, including, but not limited to, hydrochlorofluorocarbons.(b) The Contractor shall label products which contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 671j (b), (c), and (d) and 40 CFR Part 82, Subpart E, as follows:Warning Contains (or manufactured with, if applicable) * ________________________, a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere. *The Contractor shall insert the name of the substance(s).(Applicable to all orders issued hereunder) AFFARS 5352.223-9000 ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODSs) (APR 2003) (IAW AFFARS 5323.804(c))(a) Unless the requiring activity has obtained prior Senior Acquisition Official (SAO) approval, contractors may not:(1) Provide any service or product with any specification, standard, drawing, or other document that requires the use of a Class I ODS in the test, operation, or maintenance of any system, subsystem, item, component, or process; or(2) Provide any specification, standard, drawing, or other document that establishes a test, operation, or maintenance requirement that can only be met by use of a Class I ODS. [NOTE: This prohibition does not apply to manufacturing.](b) For the purposes of Air Force policy, the following products that are pure (i.e., they meet the relevant product specification identified in AFI 32-7086) are Class I ODSs:(1) Halons: 1011, 1202, 1211, 1301, and 2402;(2) Chlorofluorocarbons (CFCs): CFC-11, CFC-12, CFC-13, CFC-111, CFC-112, CFC-113, CFC-114, CFC-115, CFC-211, CFC-212, CFC-213, CFC-214, CFC-215, CFC-216, and CFC-217, and the blends R-500, R-501, R-502, and R-503; and(3) Carbon Tetrachloride, Methyl Chloroform, and Methyl Bromide.[NOTE: Material that use one or more of these Class I ODSs as minor constituents do not meet the Air Force definition of a Class I ODS.](c) The requiring activity has obtained SAO approval to permit the contractor to use the following Class I ODS(s):[List each Class I ODS, its applications or use and the approved quantities for use toughout the length of the contract. If "None," so state.] Item No Class I ODS Application or Use Quantity (lbs.) per contract period performance SEE LINE ITEM SCHEDULE.(d) The offeror/contractor is required to notify the contracting officer if any Class I ODS that is not specifically listed above is required in the test, operation, or maintenance of any system, subsystem, item, component, or process.(Applicable to all orders issued hereunder) AFFARS 252.225-7005 IDENTIFICATION OF EXPENDITURES IN THE UNITED STATES (JUN 2005) (IAW DFARS 225.1103(1)) (Applicable when exceeding the simplified acquisition teshold that require furnishing supplies for use outside the United States, construction to be performed outside the United States, or services to be performed primarily outside the United States) DFARS 252.225-7013 DUTY-FREE ENTRY (DEC 2009) (IAW DFARS 225.1101(4))(Applicable to contracts requiring duty free entry of goods into the United States) AFFARS 5352.225-9000 LAW COVERING CONTRACTS (AFMC) (OCT 2008)(IAW AFMCFARS 5325.902(90))(Applicable when shipments originate overseas) AFFARS 5352.225-9001 ENGLISH LANGUAGE REQUIREMENTS (AFMC) (OCT 2008) (IAW AFMCFARS 5325.902(91))(Applicable to contracts when delivery of documents from foreign sources is anticipated) AFFARS 5352.227-9002 VISIT REQUESTS BY FOREIGN-OWNED OR CONTROLLED FIRMS (AFMC) (JUL 1997) (IAW AFMCFARS 5327.9003(c))(a) Prime Contractors which are foreign-owned or controlled and require access to a U.S. Government installation shall submit visit requests tough their foreign embassy in Washington, D.C. at least 30 days prior to the proposed visit date.(b) Subcontractors which are foreign-owned or controlled and require access to a U.S. Government installation shall have their prime Contractor submit a visit request to the security police office of the base being visited at least two weeks before the scheduled meeting.(c) Canadian Contractors and Canadian government employees may directly arrange visits by having their security office submit a visit request to the security policy office of the base being visited at least two weeks before the scheduled meeting.(Applicable when a foreign source is a foreign-owned, operated or controlled company) DFARS 252.229-7000 INVOICES EXCLUSIVE OF TAXES OR DUTIES (JUN 1997) (IAW DFARS 229.402-1)(Applicable when a fixed-price contract will be awarded to a foreign concern)(Applicable at or below the micro-purchase teshold and Government-wide commercial purchase card is required) DFARS 252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)(IAW DFARS 232.7102)(Applicable to all solicitations and contracts over the micro-purchase teshold issued hereunder) ACCOUNTING AND APPROPRIATION DATA (AUG 1998)ACRN Funds Citation Amount Chargeable AA TO BE CITED ON EACH INDIVIDUAL ORDER $$$$ACRN TOTAL $$$$ AFFARS 5352.232-9002 TRANSPORTATION APPROPRIATION CHARGEABLE (AFMC) (OCT 2008) (IAW AFMCFARS 5332.705(90))The Transportation Allotment Identification (TAI) relates directly to the above ACRN(s). For example the TAI "TAA" is for the same line item(s) as ACRN "AA".FMS TRANSPORTATION ALLOTMENT SHALL BE USED ONLY WHEN SHIPMENT ON GOVERNMENT BILL OF LADING IS AUTHORIZED.Insert 3 if movement via surface mode or 2 if movement via airlift in place of any "#" shown. Insert last digit of current fiscal year in place of any asterisk "*" shown when material is shipped. TAI ATAC FMS ALLOTMENT / NOTETAA TBD (Applicable to all orders issued hereunder) FAR 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (FEB 1999) (IAW FAR 46.311, DFARS 246.202-4(1))The Contractor shall comply with the higher-level quality standard selected below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*Title Number Date Tailoring*See Individual Line Item Schedule(Applicable only if specified in the individual order/call issued hereunder) FAR 52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984) (IAW FAR 46.316)(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed-price contract is contemplated and the contract amount is expected to exceed the simplified acquisition teshold) INSPECTION AND ACCEPTANCE (SEP 1999) (IAW FAR 46.401(b), FAR 46.503)(Applicable to all orders issued hereunder) Government Contract Quality Assurance Inspection and Acceptance will be at (Final):Item No(s): See schedule for items with the following code(s) listed below:Inspection Code and Address:63760BAE SYSTEMS CONTROLS INC4250 AIRPORT EXPRESSWAYATTN: JAMES GUYLLFORT WAYNE, IN46809 AFFARS 5352.247-9009 MILITARY PACKAGING AND MARKING* (AFMC) (AUG 2002) (IAW AFMCFARS 5347.305-10(a) (95))Items shall be packaged in accordance with MIL-STD-2073-1 D, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129 P, Standard Practice for Military Marking. (Applicable when packaging is in accordance with the current revision of MIL-STD-2073-1, Standard Practice for Military Packaging, and shipping and storage markings are in accordance with the current revision of MIL-STD-129, Standard Practice for Military Marking (see clause 5352.247-9009, MILITARY PACKAGING AND MARKING (AFMC)))(*See Packaging Form Attached) AFFARS 5352.247-9019 FAST TRANSPORTATION (AFMC) (APR 2001) (IAW AFMCFARS 5347.305-13(90)) F.O.B. ORIGIN (OCT 1993) (IAW FAR 47.305(b))Any supply item applicable to this document shall be delivered F.O.B. at:F.O.B. Address:63760BAE Systems Controls, Inc.4250 Airport ExpresswayFt. Wayne, IN 46809Attn: James Guyll FAR 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984) (IAW FAR 52.107(f))(a) The use in this contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.(b) The use in this contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. The full text of any clause can be found at: http://farsite.hill.af.mil. Please submit proposals no later than 3:00 PM Central Standard Time on 28 August 2017 to the following emails listed below: Caroline Rozekcaroline.rozek@us.af.milPhone 405-734-4631Fax 405-734-4624
FA812217R0017 Department of the Air Force Materiel Command Lifecycle Management Center Tinker Air Force Base
7/28/17, 11:26 AM