F100 Metal Tube Assemblies FA8121-23-R-0012 4710013185083NZ / 4076853-01
Fixed price competitve action. Awarded contract FA812123P0009 to E.A. PATTEN CO., LLC, THE for 119040.00 on 2023-03-27.
FD203023 Department of the Air Force Materiel Command Air Force Sustainment Center
3/28/23, 8:54 AM F100 Metal Tube Assemblies FA8121-23-R-0012
Synopsis
FD2030-23-00244
Estimated issue date 30 Nov 2022 and estimated closing/response date 30 Dec 2022.
RFP #: FA8121-23-R-0012
Contracting Office Address: 3001 Staff Drive Tinker AFB, OK 73145
PR#: FD2030-23-00244
Nomenclature/Noun: TUBE ASSEMBLY, METAL
NSN: 4710013185083NZ
PN: 4076853-01
Application (Engine or Aircraft): F100
AMC: 1C
Description: Metal Tube Assembly
A firm fixed price contract is contemplated. The item, quantities and required deliveries are as follows:
Quantity: 28
LINE ITEM 0001: TUBE ASSEMBLY, METAL
Destination: SW3211
Delivery: 01 Oct 2023
Required Quantity: 28 each
Quantity: 2
LINE ITEM 0002: TUBE ASSEMBLY, METAL FIRST ARTICLE
Destination: TBD / TBD
Delivery: 120 days after award
Required Quantity: 2 each
Quantity: 1
LINE ITEM 0003: TUBE ASSEMBLY, METAL FIRST ARTICLE
Destination: TBD / TBD
Delivery: 120 days after award
Required Quantity: 1 each
Quantity: 1
LINE ITEM 0004: Test Report
Destination: TBD / TBD
Delivery: 120 days after award
Required Quantity: 1 LT
Quantity: 1
LINE ITEM 0005: Test Plan
Destination: TBD / TBD
Delivery: 120 days after award
Required Quantity: 1 LT
Qualified Sources:
E. A. Patten Co. (Cage: 05819)
Raytheon Technologies Corporation (Cage: 52661)
Set-aside: No Set-aside
Critical Safety Item (CSI) applicability: CSI criteria does APPLY to this item.
Mandatory Language:
Electronic procedures will be used for this solicitation. Note: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ombudsman at (405) 734-8241. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.
Justification: supplies (or Services) required are available from only one or a limited number of responsible sources(s) and no other type of supplies or services will satisfy agency requirements.
All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. One or more of the items under this acquisition is subject to Free Trade Agreements.
Based upon market research, the Government is not using the policies contained in Far Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice.
Qualification Requirements are applicable.
Item Unique Identification (IUID): Yes
Export Control Requirements: Offerors are REQUIRED to be "EXPORT CONTROLLED" certified in order to receive and view the drawings associated with this solicitation. If an offeror intends to become Export Controlled Certified, a website for registration exists: www.dlis.dla.mil/jcp.
Anticipated Award date: estimated 45 calendar days after solicitation closing date
The solicitation will be available for download on the release date from www.SAM.gov. No telephone requests. Questions concerning this synopsis or subsequent solicitation can be directed to Keith Russ at michaela.grandstaff@us.af.mil.
FA812123R0012 Department of the Air Force Materiel Command Air Force Sustainment Center
11/16/22, 12:00 PM Remanufacture of PBG Oxygen Regulator Field Tester
The United States Air Force is seeking a contractor to remanufacture PBG Oxygen Regulator Field Testers. The contractor will be responsible for disassembly, cleaning, inspection, maintenance, re-assembly, testing, and finishing of the testers to return them to a like-new condition. The contract is a firm fixed price Indefinite Delivery Indefinite Quantity (IDIQ) type with a five-year duration (1-year basic and 4 1-year options), with an estimated solicitation issue date of 7 Aug 2023, closing response date of 6 Sept 2023, and estimated award date of 30 Sept 2023.
Products and Services to be provided:
Remanufacture of PBG Oxygen Regulator Field Tester
Disassembly, cleaning, and inspection of the tester
Maintenance and re-assembly of the tester
Testing and finishing of the tester
Delivery of the remanufactured testers.
FD2030-22-01802 Department of the Air Force Materiel Command Air Force Sustainment Center
7/20/23, 4:50 PM Remanufacture of F-16 Demand Test Stand, NSN: 4920-01-321-1839, 4920-01-521-3685 49
INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT. THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE.
This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential sources for the requirements identified below and to determine if this effort can be competitive or a Small Business Set-Aside. The Government may consider breaking the requirement out by airframe. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited.
The Government will use the information gathered through publication of this SSS to determine the best acquisition strategy for this requirement. The Government is interested in all potential sources including Small Businesses, Small Disadvantaged Businesses, 8(a) businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses, Women-Owned Small Businesses, etc. The Supply Chain Management Squadron located at Tinker Air Force Base is requesting information, pursuant to FAR PART 10, in support of Market Research to identify potential sources for the of the NSN(s) listed below.
****** PLEASE SEE ATTACHED DOCUMENT FOR ADDTIONAL INFORMATION *****
FD203023 Department of the Air Force Materiel Command Air Force Sustainment Center
12/12/22, 2:46 PM F100 Metal Tube Assemblies FA8121-23-R-0012 4710013185083NZ / 4076853-01
Synopsis
FD2030-23-00244
Estimated issue date 30 Nov 2022 and estimated closing/response date 30 Dec 2022.
RFP #: FA8121-23-R-0012
Contracting Office Address: 3001 Staff Drive Tinker AFB, OK 73145
PR#: FD2030-23-00244
Nomenclature/Noun: TUBE ASSEMBLY, METAL
NSN: 4710013185083NZ
PN: 4076853-01
Application (Engine or Aircraft): F100
AMC: 1C
Description: Metal Tube Assembly
A firm fixed price contract is contemplated. The item, quantities and required deliveries are as follows:
Quantity: 28
LINE ITEM 0001: TUBE ASSEMBLY, METAL
Destination: SW3211
Delivery: 01 Oct 2023
Required Quantity: 28 each
Quantity: 2
LINE ITEM 0002: TUBE ASSEMBLY, METAL FIRST ARTICLE
Destination: TBD / TBD
Delivery: 120 days after award
Required Quantity: 2 each
Quantity: 1
LINE ITEM 0003: TUBE ASSEMBLY, METAL FIRST ARTICLE
Destination: TBD / TBD
Delivery: 120 days after award
Required Quantity: 1 each
Quantity: 1
LINE ITEM 0004: Test Report
Destination: TBD / TBD
Delivery: 120 days after award
Required Quantity: 1 LT
Quantity: 1
LINE ITEM 0005: Test Plan
Destination: TBD / TBD
Delivery: 120 days after award
Required Quantity: 1 LT
Qualified Sources:
E. A. Patten Co. (Cage: 05819)
Raytheon Technologies Corporation (Cage: 52661)
Set-aside: No Set-aside
Critical Safety Item (CSI) applicability: CSI criteria does APPLY to this item.
Mandatory Language:
Electronic procedures will be used for this solicitation. Note: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ombudsman at (405) 734-8241. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.
Justification: supplies (or Services) required are available from only one or a limited number of responsible sources(s) and no other type of supplies or services will satisfy agency requirements.
All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. One or more of the items under this acquisition is subject to Free Trade Agreements.
Based upon market research, the Government is not using the policies contained in Far Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice.
Qualification Requirements are applicable.
Item Unique Identification (IUID): Yes
Export Control Requirements: Offerors are REQUIRED to be "EXPORT CONTROLLED" certified in order to receive and view the drawings associated with this solicitation. If an offeror intends to become Export Controlled Certified, a website for registration exists: www.dlis.dla.mil/jcp.
Anticipated Award date: estimated 45 calendar days after solicitation closing date
The solicitation will be available for download on the release date from www.SAM.gov. No telephone requests. Questions concerning this synopsis or subsequent solicitation can be directed to Keith Russ at michaela.grandstaff@us.af.mil.
FA812123R0012 Department of the Air Force Materiel Command Air Force Sustainment Center
11/30/22, 9:49 AM