Project Grant 2402613
Award Date 9/1/25
Completion Date 8/31/28
Dollars Obligated $403K
Federal Grant Program
Assistance Type
Project Grant
Place of Performance
Rochester, NY 14627, USA
Similar Awards
- The National Science Foundation (NSF) awarded the University of Michigan a $367,499 Project Grant under the Mathematical and Physical Sciences (CFDA 47.049) program. This 3-year grant from August 2024 to July 2027 will fund research to understand the fundamental mechanisms controlling the development of strength and formability in aluminum alloys, which are critical for reducing global CO2 emissions. The research will focus on model Al-Mg-Si(-Cu) alloys used extensively in the transportation...
- This $619,688 federal Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) supports research to advance additive manufacturing (AM) of rare earth permanent magnets. The award funds a collaboration between the University of Nebraska-Lincoln and the India Institute of Technology-Kharagpur to: (1) design specialized alloys for AM processing, (2) conduct in-situ studies of the AM process, and (3) fabricate part-level magnets using commercial laser powder...
- This $558,370 Project Grant award from the National Science Foundation's Engineering program (CFDA 47.041) supports fundamental research to investigate the use of mixed energized fields, including electrical, magnetic, and ultrasound, in combination with the freeze casting manufacturing process. The research aims to provide a better understanding of how these energized fields can be leveraged to tailor the microstructure and properties of porous materials produced through freeze casting. This...
- The National Science Foundation awarded a $355,714 Project Grant to the University of Rochester under the Engineering (47.041) federal grant program. The grant supports research to develop an innovative, scalable nanomanufacturing platform for area-selective atomic layer deposition of components for ultra-efficient optoelectronic devices. The goal is to pioneer a continuous, energy-efficient manufacturing approach that enables novel three-dimensional chip designs not reliant on unsustainable...
- This Project Grant award from the National Science Foundation's (NSF) Mathematical and Physical Sciences program (CFDA 47.049) is funding research to investigate how damage and failure depends on the composition and microstructure of aluminum alloys with high levels of scrap-related impurities. The $108,067 award to the University of Arizona aims to establish compositional limits that identify aluminum alloys suitable for structural applications, and to understand the transitions in damage...
- This Project Grant award of $349,693.00 from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) supports research at Lehigh University to develop a physics-based, data-driven reduced-order model (ROM) for predicting microstructure evolution in binary alloy solidification. The research aims to enhance the computational efficiency of manufacturing process parameter optimization, with the goal of driving technological innovation, strengthening the U.S. economy, and supporting...
- This $122,531 Project Grant awarded by the National Science Foundation (NSF) Engineering program (CFDA 47.041) supports research into fabricating columnar-grained microstructures and single crystals of nickel-based superalloys through directional recrystallization of additively manufactured materials. The goal is to develop a cost-effective method for producing nickel-based superalloy turbine blades, a key component in jet engines that currently cost over $15,000 each. The project will...
- The National Science Foundation (NSF) Engineering program (CFDA 47.041) awarded a $659,153 Project Grant to The Ohio State University to conduct research on the reuse and recycling of feedstock in the laser directed energy deposition metal additive manufacturing process. The research aims to reveal how characteristics of reused and recycled feedstock influence melting and solidification, addressing challenges in the qualification and certification of large components, such as hydropower...
- This Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) provides $2,497,403.00 to the Rochester Institute of Technology (RIT) to advance industrial adoption of metal additive manufacturing (AM) through a novel multi-nozzle molten metal jetting process. The goal is to enable AM of metal components that can compete with traditional casting and machining processes on the basis of cost, speed, and quality. Key aspects include using both new and...
- This EAGER (Early-Concept Grants for Exploratory Research) award from the National Science Foundation (CFDA 47.041 - Engineering) provides $300,000 to New York University (NYU) to develop a novel plasma-electrochemical approach for decarbonizing steel manufacturing. The project aims to eliminate the need for carbon-based reducing agents and fuels in steel production, which currently accounts for 20% of industrial CO2 emissions. Key activities include: 1) Establishing design principles for a...