Project Grant 2347739
Award Date 8/1/24
Completion Date 7/31/26
Dollars Obligated $200K
Federal Grant Program
Assistance Type
Project Grant
Place of Performance
Las Cruces, NM 88003, USA
Similar Awards
- This Project Grant award from the National Science Foundation (NSF) Directorate for Engineering (CFDA 47.041) totaling $344,918 will establish a collaborative research program at Florida International University (FIU) to develop advanced data-driven approaches for additive manufacturing (AM) or 3D printing of materials with locally tunable electrical and mechanical properties. The research aims to create new polymer resin formulations for digital light processing (DLP) 3D printing that can...
- This $200,000 Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) supports research to develop new design strategies for improving the structural robustness of 3D-printed metal parts. The research aims to (1) investigate the impact of manufacturing defects like porosity on the mechanical performance of additive manufacturing (AM) parts, (2) establish strategies for distributing artificial defects to parts, (3) develop a defect-tolerant design...
- This Project Grant award from the National Science Foundation (CFDA 47.084 - NSF Technology, Innovation, and Partnerships program) provides $305,000.00 to Fluent Metal Inc. to develop a new type of metal 3D printing technology. The project aims to create a drop-on-demand liquid metal printing process that uses solid wire as feedstock, making high-quality metal printing more accessible and affordable for small and medium-sized businesses, research labs, and universities. The primary research...
- The National Science Foundation awarded a $567,121 Project Grant to Michigan State University under the Engineering (47.041) federal grant program. The grant funds fundamental research to develop a new metal additive manufacturing process using light projection of mixtures of photopolymer and metal powder. Rather than point-by-point printing, the proposed process would use digital light projection to cure an entire layer of photopolymer mixed with metal powder. This could enable high-speed...
- This Project Grant award from the Directorate for Mathematical and Physical Sciences, under the National Science Foundation's Mathematical and Physical Sciences Federal Grant Program (CFDA 47.049), is supporting a research project that explores a novel approach to creating stronger, more heat- and stress-resistant metals for extreme environments. The $249,614 award to the University of Texas Rio Grande Valley (UTRGV) is investigating in-situ gas-phase alloying during directed energy...
- This Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) supports a collaborative research project focused on developing intelligent scan sequence generation to reduce local overheating, distortion, and residual stress in laser powder bed fusion (LPBF) additive manufacturing. The $250,000 award, spanning January 1, 2025 to December 31, 2027, will enable researchers at the University of Pittsburgh to mathematically, numerically, and experimentally...
- The National Science Foundation (NSF) awarded a $500,050 Project Grant under the Mathematical and Physical Sciences program (CFDA 47.049) to the Rochester Institute of Technology (RIT) to advance additive manufacturing of metal components. The grant supports research on a novel multi-nozzle molten metal jetting process that aims to reduce costs, increase production speeds, and leverage recycled feedstock materials for industrial-grade metal additive manufacturing. Key goals are to enable metal...
- The National Science Foundation (NSF) awarded a 5-year, $463,417 CAREER grant to the University of Nebraska (UNL) under the NSF Engineering program (CFDA 47.041) to establish a scalable manufacturing approach for incorporating diverse solid particle additives into room temperature liquid metals. This work will lead to the creation of a novel class of multiphase conductive pastes with customizable physical, rheological, and chemical properties. The enhanced properties will increase the...
- This National Science Foundation (NSF) Project Grant award, funded under the NSF Engineering program (CFDA 47.041), provides $1,100,000 to Southern University and A&M College (SUBR) to acquire an advanced laser powder bed fusion 3D printer for multi-material additive manufacturing research and education. The project aims to enhance engineering research and workforce development, particularly among underrepresented groups, through hands-on experience with this cutting-edge additive...
- This National Science Foundation (NSF) Project Grant award, under the NSF Engineering program (CFDA 47.041), provides $475,399 to Auburn University to conduct fundamental research on laser nanoparticle powder-bed fusion, an additive nanomanufacturing process. The research aims to develop layer-by-layer fabrication of micro- and nano-scale functional structures and devices with tunable chemical compositions, interface interactions, and physical architectures. This work has potential...