Project Grant 2301948
Award Date 8/1/23
Completion Date 7/31/25
Dollars Obligated $200K
Federal Grant Program
Assistance Type
Project Grant
Place of Performance
Statesboro, GA, USA
Similar Awards
- Georgia Southern University Research & Service Foundation Inc. received a $195,574 two-year Project Grant award from the National Science Foundation Division of Civil, Mechanical, and Manufacturing Innovation under the Engineering federal grant program (CFDA 47.041). The award supports fundamental research to understand the austenite grain refinement mechanism in nickel-alloyed ductile irons, with the goal of developing an economical in-situ grain refinement process to improve the strength...
- The National Science Foundation (NSF) awarded a $198,462 Project Grant under the Engineering (CFDA 47.041) program to the Georgia Southern University Research & Service Foundation Inc. The grant, with a performance period from January 1, 2026 to December 31, 2027, supports research to develop sustainable, vegetable oil-based superhydrophobic polymer coatings that can self-repair even significant damage through a viscous flow mechanism. The research aims to uncover relationships between...
- The National Science Foundation awarded a $500,000 Project Grant to the Georgia Tech Research Corporation from June 2021 through May 2026 under the Engineering federal grant program (CFDA 47.041). The grant funds research to develop rapid manufacturing techniques for three-dimensional nanostructures using projection two-photon lithography. This process could enable new types of nano-enabled devices by allowing for faster and more precise fabrication of nanoscale components. The research is being...
- This Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) provides $199,645 to Georgia Southern University Research & Service Foundation Inc. to conduct fundamental research on understanding porosity formation in ductile iron castings. The research aims to correlate porosity to graphitization and casting wall movement through experiments and numerical simulations. Key activities include developing an apparatus for in-situ measurement of casting...
- This federal Project Grant award of $285,435 from the National Science Foundation (NSF) under the Mathematical and Physical Sciences (CFDA 47.049) program supports a collaborative research effort between Georgia Southern University and the University of Texas at Austin to develop a novel machine learning-assisted materials design cycle for bio-based thermosets. The key products and services to be delivered under this 3-year award, which begins on June 1, 2025, include: High-throughput production...
- This $325,044 federal Project Grant award from the National Science Foundation's Engineering program (CFDA 47.041) supports research to develop a new "aerodynamic fiber deposition" technology to manufacture biomimetic soft fiber-reinforced composites with spatially varying fiber arrangements. The research aims to enable the production of high-throughput, highly controlled nano/microfiber patterns that mimic the complex fiber structures found in biological tissues like skin, muscle, and...
- The National Science Foundation (NSF) awarded a $200,000 Project Grant under the Engineering program (CFDA 47.041) to the Board of Trustees of Southern Illinois University (SIU) for the "ERI: DEFECT-TOLERANT TOPOLOGY DESIGN FOR ADDITIVE MANUFACTURING: A NOVEL APPROACH TO ENHANCING STRUCTURAL ROBUSTNESS" research project. This 2-year initiative seeks to advance the development of new design methodologies to enhance the structural robustness of 3D-printed metal parts. The research aims...
- This $200,000 National Science Foundation (NSF) Engineering grant (CFDA 47.041) supports fundamental research at Texas State University to investigate material-process-microstructure-property relationships in the direct ink writing of high-viscosity rubber nanocomposites. The goal is to optimize material composition and manufacturing process parameters to achieve high-quality 3D-printed parts with enhanced mechanical, electromechanical, and time-dependent properties. Key activities include...
- This $887,740 Project Grant award from the National Science Foundation's Integrative Activities program (CFDA 47.083) supports the development of a real-time monitoring and structural validation system for continuous fiber printing, an advanced additive manufacturing technique. The key products and services to be delivered include: Modeling techniques to determine how defects affect the structural performance of printed parts Deep learning models to process multi-modal sensor data (e.g.,...
- This Project Grant award, valued at $380,824.00 and funded by the National Science Foundation's (NSF) Mathematical and Physical Sciences program (CFDA 47.049), will support a collaborative research project between Georgia Southern University and the University of Texas at Austin (UT Austin). The project aims to develop a novel machine learning-assisted materials design cycle for bio-based thermosets, with the goal of creating sustainable, designer materials. Key deliverables include...