Project Grant 2222250
Award Date
1/1/23
Completion Date
12/31/25
Dollars Obligated
$598K
Federal Agency
Division of Civil, Mechanical, and Manufacturing Innovation
Federal Grant Program
47.041
Assistance Type
Project Grant
Place of Performance
La Jolla, CA 92093, USA
Similar Awards
This Project Grant award from the National Science Foundation (NSF) under the Engineering program (CFDA 47.041) supports research by Carnegie Mellon University (CMU) to investigate an innovative power field control strategy for achieving prescribed thermal histories throughout parts produced by powder bed fusion additive manufacturing. The $649,345 award, effective May 1, 2025 through April 30, 2030, aims to understand the effects of power field control on porosity, microstructure,...
This Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) supports research to address challenges in high deposition rate metal additive manufacturing. The $570,160 award to the University of Texas Rio Grande Valley aims to investigate and control the metallurgical transformation of deposited material by simultaneously employing multiple thermal energy sources, such as laser, induction heating, and ultrasonic vibration. The key research tasks include...
This Project Grant from the National Science Foundation's Division of Civil, Mechanical, and Manufacturing Innovation, under the Engineering program (CFDA 47.041), provides $481,998 to support research at the University of California, Berkeley on developing a new additive manufacturing process for multi-material and multi-functional part fabrication. The principal investigator will conduct fundamental research into a charge-programmed additive microfabrication technique to rapidly pattern...
This Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) supports a collaborative research project focused on developing intelligent scan sequence generation to reduce local overheating, distortion, and residual stress in laser powder bed fusion (LPBF) additive manufacturing. The $250,000 award, spanning January 1, 2025 to December 31, 2027, will enable researchers at the University of Pittsburgh to mathematically, numerically, and experimentally...
This National Science Foundation (NSF) Project Grant award, under the Engineering program (CFDA 47.041), provides $650,000 in funding to Carnegie Mellon University (CMU) from June 1, 2024 to May 31, 2027. The project aims to fully understand the mechanisms controlling shape distortion in additive manufacturing (AM) processes, particularly during the sintering of nano/microparticles. The research involves integrated experimental and theoretical work to identify critical AM process parameters that...
This Project Grant award, funded by the National Science Foundation (NSF) Engineering program (CFDA 47.041), supports research to develop methodologies for monitoring and improving personalized manufacturing processes, particularly for one-of-a-kind parts produced using additive manufacturing. The award, totaling $129,624 and spanning from June 1, 2024, to May 31, 2027, will enable researchers at the University of Oklahoma to establish a novel latent space monitoring approach based on...
The National Science Foundation awarded a $197,643 Project Grant to San Diego State University Research Foundation under the Engineering federal grant program (CFDA 47.041). The grant will fund research from January 2022 through December 2023 to develop techniques for making high-temperature alloyed components by combining additive manufacturing and spark plasma sintering. Specifically, the grant aims to enable greater complexity in component shapes while also predicting microstructures. The...
This National Science Foundation (NSF) GOALI (Grant Opportunities for Academic Liaison with Industry) project grant, awarded under the Engineering program (CFDA 47.041), aims to develop uncertainty-aware modeling and control strategies for the microscale selective laser sintering (?-SLS) additive manufacturing process. The $609,991 award, effective September 1, 2024 through August 31, 2027, will enable researchers at the University of Texas at Austin to: Develop physics-based models with...
The National Science Foundation Division of Civil, Mechanical, and Manufacturing Innovation awarded a $354,392 Project Grant to The Regents of the University of California for collaborative research on learning and distributional feedback control for fabrication of advanced materials. The three-year award running from August 1, 2021 to July 31, 2024 is funded through the Engineering program (CFDA 47.041) to improve innovation, creativity and excellence in engineering research and education....
This Project Grant award, provided by the National Science Foundation's (NSF) Engineering program (CFDA 47.041), supports research investigating the reuse and recycling of feedstock in the laser directed energy deposition metal additive manufacturing process. The total funding amount is $659,153 over a 5-year period, with the award starting on May 1, 2025 and ending on April 30, 2030. The research aims to reveal how characteristics of reused and recycled feedstock influence melting and...