Annual Lifting Gear Load Testing, Inspections and Certifications
Added: Sep 19, 2016 9:13 am Combined Synopsis/SolicitationForAnnual Lifting Gear Load Testing, Inspections, and CertificationsRFQ: W911S0-16-T-0022 This is a combined synopsis/solicitation for commercial items prepared In Accordance With (IAW) the format in Federal Acquisition Regulation (FAR) Subpart 12.6 and as supplemented by FAR Subpart 13.5 and additional information included in this notice. This announcement constitutes only the solicitation; proposals are being requested and a written solicitation will not be issued.The Mission and Installation Contracting Command (MICC), Fort Eustis, VA intends to procure non-personnel services for annual lifting gear load testing, inspections, and certifications of lifting gear vessels. The objectives of the requirement are to test, inspect and certify that 100% of vessel lifting gear, winches and cranes to ensure the safety and stability of ocean going vessels. Solicitation number is W911S0-16-T-0022 is issued as a Request for Quotation (RFQ). This RFQ incorporates provisions and clauses in effect tough Federal Acquisition Circular 2005-89, dated 15 Aug 2016. This is a 100% HUBZone small business set-aside requirement. The NAICS code is 336611, Ship Building and Repairing, with a small business size standard of 1250 employees. The complete Offer Schedule, Performance Work Statement (PWS), and any other associated documents can be downloaded at https://www.fbo.gov/ under subject solicitation number. It is contemplated that the Period of Performance (POP) will be for a base year and four (4) twelve-month option periods. See the Schedule and PWS for specific POP. The DPAS rating is not applicable to this requirement. This requirement is FOB Destination. The anticipated award date is 23 Sep 2016.The provision at 52.212-1 Instructions to Offerors-Commercial Items (Oct 2015) is applicable, is incorporated by reference, and is tailored as follows: Paragraphs (b)(5) Terms of any express warranty, (d) Product samples, and (e) Multiple offers are deleted.The provision at 52.212-2, Evaluation-Commercial Items (Oct 2014) applies to this acquisition and is incorporated by full text. See provision for specific evaluation criteria. The basis of award for this requirement is Lowest Price Technically Acceptable (LPTA).The provision at FAR 52.212-3 Offeror Representations and Certifications-Commercial Items (July 2016) Alt I (Oct 2014), and DFARS 252.212-7000, Offeror Representations and Certifications-Commercial Items, applies to this acquisition and is incorporated by full text. Offerors shall include a completed copy of their Representations and Certifications with their Quotations or may elect to complete the Representations and Certifications online at the System for Award Management (SAM) website. SAM may be accessed at https://www.sam.gov/portal/public/SAM/. Pursuant to FAR 9.1, Responsible Prospective Contractor, offerors may be required to provide the name of the financial institution where an applicable bank account is located, supplier names where accounts are established, account numbers, names of customers, points of contact, and telephone numbers, as well as a brief description of previous contract services, providing the length of the contract or agreement, the dollar value, point of contact, and telephone number. The information will be used to determine responsibility of an offeror. The clause at 52.212-4, Contract Terms and Conditions-Commercial Items (May 2015), applies to this acquisition with addenda attached. The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Jun 2016), applies to this acquisition and is incorporated by full text. See full text for specifics regarding FAR clauses cited in the clause that are applicable to the acquisition. Quotation Submittal and Inquiries: Quotations shall be submitted No Later Than (NLT) 11:00 a.m. EST, 23 September 2016 by email to the following addresses:Primary Contract Specialist: kristie.n.owens.civ@mail.mil Contracting Officer: patricia.d.paige.civ@mail.milPeriod for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers.All questions regarding this RFQ shall be submitted NLT 10:00 AM EST, 21 September 2016 by email to the following addresses:Primary Contract Specialist: kristie.n.owens.civ@mail.mil, 757-501-8146Contracting Officer: patricia.d.paige.civ@mail.mil, 757-501-8147Schedule of Supplies/ServicesCLINS-BASE YEARITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0001 Crane, Davit, Hoist & Sling Certs 1 EA (LCM-8, MOD 2)IAW PWS Para. 5.2FFPPeriod of Performance (POP): Base Year, 25 Sep 2016 -24 Sep 2017FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0002 Crane, Davit, Hoist & Sling Certs (LCU) 7 EA IAW PWS Para. 5.3FFPPeriod of Performance (POP): Base Year, 25 Sep 2016 -24 Sep 2017FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0003 Crane, Davit, Hoist & Sling Certs (LSV) 1 EA IAW PWS Para. 5.4FFPPeriod of Performance (POP): Base Year, 25 Sep 2016 -24 Sep 2017FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0004 Crane, Davit, Hoist & Sling Certs (LT) 1 EA IAW PWS Para. 5.5FFPPeriod of Performance (POP): Base Year, 25 Sep 2016 -24 Sep 2017FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0005 Crane, Davit, Hoist & Sling Certs (MWT) 5 EA IAW PWS Para. 5.6FFPPeriod of Performance (POP): Base Year, 25 Sep 2016 -24 Sep 2017FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0006 Crane, Davit, Hoist & Sling Certs (SLWT) 1 EA IAW PWS Para. 5.7FFPPeriod of Performance (POP): Base Year, 25 Sep 2016 -24 Sep 2017FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0007 558 Shop A Frame Cert 1 EA IAW PWS Para. 5.8 FFPPeriod of Performance (POP): Base Year, 25 Sep 2016 -24 Sep 2017FOB: DestinationPeriod of Performance (POP): Base Year, 25 Sep 2016 -24 Sep 2017FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0008 Contractor Manpower Reporting (CMR) 1 EA IAW PWS Para. 5.10FFPPeriod of Performance (POP): Base Year, 25 Sep 2016 -24 Sep 2017 FOB: DestinationNET AMOUNTtiny_mce_marker _____________TOTAL BASE YEARtiny_mce_marker _____________CLINS- OPTION YEAR 1ITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 1001 Crane, Davit, Hoist & Sling Certs (LCM8) 1 EA (LCM-8, MOD 2)IAW PWS Para. 5.2FFPPeriod of Performance (POP): Base Year, 25 Sep 2017 -24 Sep 2018FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 1002 Crane, Davit, Hoist & Sling Certs (LCU) 7 EA IAW PWS Para. 5.3FFPPeriod of Performance (POP): Base Year, 25 Sep 2017 -24 Sep 2018FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 1003 Crane, Davit, Hoist & Sling Certs (LSV) 1 EA IAW PWS Para. 5.4FFPPeriod of Performance (POP): Base Year, 25 Sep 2017 -24 Sep 2018FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 1004 Crane, Davit, Hoist & Sling Certs (LT) 1 EA IAW PWS Para. 5.5FFPPeriod of Performance (POP): Base Year, 25 Sep 2017 -24 Sep 2018FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 1005 Crane, Davit, Hoist & Sling Certs (MWT) 5 EA IAW PWS Para. 5.6FFPPeriod of Performance (POP): Base Year, 25 Sep 2017 -24 Sep 2018FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 1006 Crane, Davit, Hoist & Sling Certs (SLWT) 1 EA IAW PWS Para. 5.7FFPPeriod of Performance (POP): Base Year, 25 Sep 2017 -24 Sep 2018FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 1007 558 Shop A Frame Cert 1 EA IAW PWS Para. 5.8FFPPeriod of Performance (POP): Base Year, 25 Sep 2017 -24 Sep 2018FOB: DestinationIITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 1008 Contractor Manpower Reporting (CMR) 1 EA IAW PWS Para. 5.10FFPPeriod of Performance (POP): Base Year, 25 Sep 2017 -24 Sep 2018 FOB: DestinationNET AMOUNTtiny_mce_marker _____________TOTAL OPTION YEAR 1tiny_mce_marker ____________CLINS- OPTION YEAR 2ITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 2001 Crane, Davit, Hoist & Sling Certs (LCM8) 1 EA (LCM-8, MOD 2)IAW PWS Para. 5.2FFPPeriod of Performance (POP): Base Year, 25 Sep 2018 -24 Sep 2019FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 2002 Crane, Davit, Hoist & Sling Certs (LCU) 7 EA IAW PWS Para. 5.3FFPPeriod of Performance (POP): Base Year, 25 Sep 2018 -24 Sep 2019FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 2003 Crane, Davit, Hoist & Sling Certs (LSV) 1 EA IAW PWS Para. 5.4FFPPeriod of Performance (POP): Base Year, 25 Sep 2018 -24 Sep 2019FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 2004 Crane, Davit, Hoist & Sling Certs (LT) 1 EA IAW PWS Para. 5.5FFPPeriod of Performance (POP): Base Year, 25 Sep 2018 -24 Sep 2019FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 2005 Crane, Davit, Hoist & Sling Certs (MWT) 5 EA IAW PWS Para. 5.6FFPPeriod of Performance (POP): Base Year, 25 Sep 2018 -24 Sep 2019FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 2006 Crane, Davit, Hoist & Sling Certs (SLWT) 1 EA IAW PWS Para. 5.7FFPPeriod of Performance (POP): Base Year, 25 Sep 2018 -24 Sep 2019FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 2007 558 Shop A Frame Cert 1 EA IAW PWS Para. 5.8FFPPeriod of Performance (POP): Base Year, 25 Sep 2018 -24 Sep 2019FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 2008 Contractor Manpower Reporting (CMR) 1 EA IAW PWS Para. 5.10FFPPeriod of Performance (POP): Base Year, 25 Sep 2018 -24 Sep 2019 FOB: DestinationNET AMOUNTtiny_mce_marker _____________TOTAL OPTION YEAR 2tiny_mce_marker ____________CLINS- OPTION YEAR 3ITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 3001 Crane, Davit, Hoist & Sling Certs (LCM8) 1 EA (LCM-8, MOD 2)IAW PWS Para. 5.2FFPPeriod of Performance (POP): Base Year, 25 Sep 2019 -24 Sep 2020 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 3002 Crane, Davit, Hoist & Sling Certs (LCU) 7 EA IAW PWS Para. 5.3FFPPeriod of Performance (POP): Base Year, 25 Sep 2019 -24 Sep 2020 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 3003 Crane, Davit, Hoist & Sling Certs (LSV) 1 EA IAW PWS Para. 5.4FFPPeriod of Performance (POP): Base Year, 25 Sep 2019 -24 Sep 2020FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 3004 Crane, Davit, Hoist & Sling Certs (LT) 1 EA IAW PWS Para. 5.5FFPPeriod of Performance (POP): Base Year, 25 Sep 2019 -24 Sep 2020 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 3005 Crane, Davit, Hoist & Sling Certs (MWT) 5 EA IAW PWS Para. 5.6FFPPeriod of Performance (POP): Base Year, 25 Sep 2019 -24 Sep 2020 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 3006 Crane, Davit, Hoist & Sling Certs (SLWT) 1 EA IAW PWS Para. 5.7FFPPeriod of Performance (POP): Base Year, 25 Sep 2019 -24 Sep 2020 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 3007 558 Shop A Frame Cert 1 EA IAW PWS Para. 5.8FFPPeriod of Performance (POP): Base Year, 25 Sep 2019 -24 Sep 2020 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 3008 Contractor Manpower Reporting (CMR) 1 EA IAW PWS Para. 5.10FFPPeriod of Performance (POP): Base Year, 25 Sep 2019 -24 Sep 2020 FOB: DestinationNET AMOUNTtiny_mce_marker _____________TOTAL OPTION YEAR 3tiny_mce_marker ____________CLINS- OPTION YEAR 4ITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 4001 Crane, Davit, Hoist & Sling Certs (LCM8) 1 EA (LCM-8, MOD 2)IAW PWS Para. 5.2FFPPeriod of Performance (POP): Base Year, 25 Sep 2020 -24 Sep 2021 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 4002 Crane, Davit, Hoist & Sling Certs (LCU) 7 EA IAW PWS Para. 5.3FFPPeriod of Performance (POP): Base Year, 25 Sep 2020 -24 Sep 2021 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 4003 Crane, Davit, Hoist & Sling Certs (LSV) 1 EA IAW PWS Para. 5.4FFPPeriod of Performance (POP): Base Year, 25 Sep 2020 -24 Sep 2021FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 4004 Crane, Davit, Hoist & Sling Certs (LT) 1 EA IAW PWS Para. 5.5FFPPeriod of Performance (POP): Base Year, 25 Sep 2020 -24 Sep 2021FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 4005 Crane, Davit, Hoist & Sling Certs (MWT) 5 EA IAW PWS Para. 5.6FFPPeriod of Performance (POP): Base Year, 25 Sep 2020 -24 Sep 2021 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 4006 Crane, Davit, Hoist & Sling Certs (SLWT) 1 EA IAW PWS Para. 5.7FFPPeriod of Performance (POP): Base Year, 25 Sep 2020 -24 Sep 2021 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 4007 558 Shop A Frame Cert 1 EA IAW PWS Para. 5.8FFPPeriod of Performance (POP): Base Year, 25 Sep 2020 -24 Sep 2021 FOB: DestinationITEM NO. SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 4008 Contractor Manpower Reporting (CMR) 1 EA IAW PWS Para. 5.10FFPPeriod of Performance (POP): Base Year, 25 Sep 2020 -24 Sep 2021 FOB: DestinationNET AMOUNTtiny_mce_marker ______________TOTAL OPTION YEAR 4tiny_mce_marker ______________TOTAL BASE YEAR AND ALL OPTION YEARStiny_mce_marker ______________ Performance Work Statement (PWS)ANNUAL LIFTING GEAR LOAD TESTING, INSPECTIONS, AND CERTIFICATIONS7TH Transportation Brigade (Expeditionary)PART IGENERAL INFORMATION1. General: This is a non-personnel services contract to provide annual Cargo Gear (CG) load testing, inspections, certifications and incidental repairs for maritime lifting gear within 7th Transportation Brigade (Expeditionary). The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.1.1. Description of Services/Introduction: The contractor shall be located within 100 mile radius of Fort Eustis and be able to provide annual load testing, inspections and certifications of lifting gear for vessels assigned to the 10th and 11th Transportation Battalions, 7th Transportation Brigade (Expeditionary), Fort Eustis, Virginia.1.2. Background: All vessel lifting gear, winches and cranes within the 7th Transportation Brigade (Expeditionary) need to be tested annually IAW Army Regulation (AR) 56-9 effective date 17 March 2010, Surface Transportation, Watercraft, Code of Federal Regulations (CFR's), and Occupational Safety and Health Administration (OSHA) requirements. These inspections and certifications are needed to ensure the safety of Soldiers who operate the associated gear.1.3. Objectives: For efficient and safe testing, inspection, and certification of all vessel lifting gear, winches, and cranes identified in this PWS to ensure compliance with OSHA's requirements and the safety and stability of ocean vessels operating in extreme weather conditions. If the equipment does not satisfy the applicable safety standards, then the Contractor must submit a report to the COR within 24 hours of discovery stating the safety issues discovered.1.4. Scope: The Contractor shall furnish all labor, supervision, supplies, equipment, materials, and services required to perform work under this contract that are not listed under Section 3 of this PWS. The contractor shall furnish the services of lifting gear certifications for vessels assigned to 7th Transportation Brigade (Expeditionary), Fort Eustis, Virginia. Certification verifies that the equipment meets the standards of the CFR and OSHA. If there is a conflict between the two, the contractor will go with the one with the more stringent requirements.1.5. Period of Performance: The period of performance shall be for one (1) Base Year of 12 months with Four (4) option years each with a performance period of 12 months.Table 1 Period of PerformanceStart Date End DateBase Year 25 September 2016 24 September 2017Option Year 1 25 September 2017 24 September2018Option Year 2 25 September 2018 24 September2019Option Year 3 25 September 2019 24 September 2020Option Year 4 25 September 2020 24 September 20211.6. General Information:1.6.1. Quality Control (QC): Quality Control (QC) is the responsibility of the contractor. The contractor is responsible for the delivery of quality services/supplies to the Government. The Contractor shall develop, implement and maintain an effective Quality Control System which includes a written Quality Control Plan (QCP). The QCP shall implement standardized procedure/methodology for monitoring and documenting contract performance to ensure all contract requirements are met. The Contractors' QCP must contain a systematic approach to monitor operations to ensure acceptable services/products are provided to the Government. The QCP, at a minimum, shall address continuous process improvement; procedures for scheduling, conducting and documentation of inspection; discrepancy identification and correction; corrective action procedures to include procedures for addressing Government discovered non-conformances; procedures for a root cause analysis to identify the root cause and root cause corrective action to prevent re-occurrence of discrepancies; procedures for trend analysis; procedures for collecting and addressing customer feedback/complaints. The contractor shall upon request provide to the Government their quality control documentation. The QCP shall be provided to the Contracting Officer and Contracting Officer's Representative (COR) via e-mail within 10 business days of the Performance Start Date. The Government will accept, or return the QCP for revision within 10 business days. Any change to the QCP after initial acceptance requires the review and acceptance of the KO.1.6.2. Quality Assurance: The Government will evaluate the contractor's performance under this contract IAW the Quality Assurance Surveillance Plan (QASP). This plan is a Government only document primarily focused on what the Government must do to assure that the contractor has performed IAW the requirements of the contract.1.6.3. Federal Government Holidays: The Contractor shall not schedule interfacing work (meetings, approvals, deliverables, etc.) with the Government on any of the established holidays in federal services, or any other day designated as a holiday by Federal Statute or by Execute Order except with prior approval from the Contracting Officer or COR. If a holiday fails on a Saturday, the official holiday shall be celebrated on the preceding Friday. If a holiday falls on a Sunday, the official holiday will be celebrated on the following Monday. Table 1 shows the Federal Holidays.NOTE: The action date observed may vary. Refer to http://www.opm.gov/operating.status Schedules for actual dates each year.New Year's Day 1st day of JanuaryMartin Luther King Jr.'s Birthday 3rd Monday of JanuaryPresidents Day 3rd Monday of FebruaryMemorial Day Last Monday of MayIndependence Day 4th day of JulyLabor Day 1st Monday of SeptemberColumbus Day 2nd Monday of OctoberVeterans Day 11th day of NovemberThanksgiving Day 4th Thursday of NovemberCistmas Day 25th day of DecemberIn addition to the days designated as holidays, the Government observes the following days:Any other day designated by Federal StatuteAny other day designated by Executive OrderAny other day designated by a President's Proclamation1.6.4. Hours of Operation: The contractor is responsible for conducting business, between the hours of 0730-1700 Monday tu Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.1.6.5. Place of Performance: The work to be performed under this contract shall be performed pier-side at Fort Eustis, Virginia.1.6.6. Special Qualifications: The contractor must be certified as "competent" (OSHA certified to inspect and certify the lifting devices) IAW 29 CFR§ 017997.1.6.7. Post Award Conference/Periodic Progress Meetings: The Contractor agrees to attend any post award conference convened by the contracting activity IAW Federal Acquisition Regulation Subpart 42.5, Post Award Orientation. The Contracting Officer, COR, and other Government personnel, as appropriate, may meet periodically with the contractor to review the contractor's performance. At these meetings the Government will apprise the contractor of how the Government views the contractor's performance and the contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.1.6.8. Contracting Officer's Representative (COR): The COR will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract; perform inspections necessary in connection with contract performance; maintain written and oral communications with the Contractor concerning technical aspects of the contract; issue written interpretations of technical requirements, including Government drawings, designs, and specifications; monitor Contractor's performance and notify both the Contracting Officer and Contractor of any deficiencies; coordinate availability of Government Furnished Property (GFP); and provide site entry of Contractor personnel. The COR is not authorized to make any commitments or changes that will affect the terms and conditions of the resulting order.1.6.9. Identification of Contractor Employees: The Contractor (to include subcontractors) shall provide each employee an Identification (ID) Badge, which includes at a minimum, the Company Name, Employee Name and a color photo of the employee. ID Badges for Key Personnel shall also indicate their job title. ID Badges shall be worn at all times during which the employee is performing work under this contract. Each Contractor (to include subcontractors) employees shall wear the ID Badge in a conspicuous place on the front of exterior clothing and above the waist except when safety or health reasons prohibit. The Contractor (to include subcontractors) shall be responsible for collection of ID Badges upon completion of the contract or termination of employee. A listing of issued identification cards shall be furnished to the Contracting Officer prior to the contract performance date and updated as needed to reflect Contractor and Subcontractor personnel changes. All contract personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed.1.6.10. Organizational Conflict of Interest (OCI): Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor's mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.1.6.11. Access and General Protection/Security Policy and Procedures. Contractor employees performing within an Army controlled installation, facility, or area. Contractor and all associated subcontractors personnel shall comply with applicable installation, facility and area commander's installation/facility access and local security policies and procedures (provided by Government representative). The contractor shall also provide all information required for National Crime Information Center (NCIC)-III background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.1.6.12. Contractor Manpower Reporting (CMR): The Office of the Assistant Secretary of the Army (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the Contractor shall report ALL Contractor manpower (including subcontractor manpower) required for performance of this contract. The Contractor shall completely fill in all the information in the format using the following web address https://Contractormanpower.army.pentagon.mil. The required information includes: (1) Contracting Office, Contracting Officer, Contracting Officer's Technical Representative (COTR) or also known as the Contracting Officer's Representative (COR); (2) Contract number, including task and delivery order number; (3) Beginning and ending dates covered by reporting period; (4) Contractor's name, address, phone number, e-mail address, identity of Contractor employee entering data; (5) Estimated direct labor hours (including sub-Contractors); (6) Estimated direct labor dollars paid this reporting period (including sub-Contractors); (7) Total payments (including sub-Contractors); (8) Predominant Federal Service Code (FSC) reflecting services provided by Contractor (and separate predominant FSC for each sub-Contractor if different); (9) Estimated data collection cost; (10) Organizational title associated with the Unit Identification Code (UIC) for the Army Requiring Activity (the Army Requiring Activity is responsible for providing the Contractor with its UIC for the purposes of reporting this information); (11) Locations where Contractor and sub-Contractors perform the work (specified by zip code in the United States and nearest city, country, when in an overseas location, using standardized nomenclature provided on website); (12) Presence of deployment or contingency contract language; and (13) Number of Contractor and sub-Contractor employees deployed in theater this reporting period (by country). As part of its submission, the Contractor shall provide the estimated total cost (if any) incurred to comply with this reporting requirement. Reporting period shall be the period of performance not to exceed 12 months ending September 30 of each government fiscal year and must be reported by 31 October of each calendar year. Contractors may use a direct XML data transfer to the database server or fill in the fields on the website. The XML direct transfer is a format for transferring files from a Contractor's system to the secure website without the need for separate data entries for each required data element at the website.The specific formats for the XML direct transfer may be downloaded from the website. Contractor shall provide a training report within 45 days.1.7 Approvals. Prior approval is required to accomplishing any maintenance or minor repairs. In an emergency, the contractor must contact the COR and the Contracting Officer.1.8 Emergency Contact. The Project Manager, or designee, must be available to be contacted 24-s/day, 7 days a week to respond to emergency situations. This function may be performed by someone carrying a cellphone. The Contractor must return the Government's call within 30 minutes.PART 2DEFINITIONS & ACRONYMS2. DEFINITIONS AND ACRONYMS:2.1. DEFINITIONS:2.1.1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or services to the government. The term used in this contract refers to the prime.2.1.2. CONTRACTING OFFICER. A person with authority to enter into, administer, make changes to the contract, and/or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S.Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.2.1.4. COMPETENT PERSON. An individual qualified to perform gear certification functions with respect to vessels' cargo handling gear, as specifically set forth in 29 CFR § 1919.37. Or an individual qualified under the provisions of Subparts F and G of this part to perform gear certification functions with respect to shore-based material handling devices 29 CFR §1919.2.2.1.5. CARGO GEAR means vessel's equipment used for the handling of cargo, such as cranes, derrick, lifting devices, and lifting fixtures.2.1.6. LIFTING DEVICES. Any device or component used to raise, lower, hold, or position a load from one location or elevation to another. Examples of lifting devices include forklift trucks, cranes, manual or motorized pallet jacks, hoists, wreckers, A-frames, slings, ropes, wire ropes, hooks, O-rings, pear rings, spreader bars or lifting clamps, beams, jacks, safety stands, and jack stands.2.1.7. LIFTING FIXTURES. Any device or assembly of devices used to facilitate attachment of a load to a lifting device. Examples of lifting fixtures include an H-beam with nylon slings, wire rope with spreader bars or rope with lifting clamps.2.1.8. DEFECTIVE SERVICE. A service output that does not meet the standard of performanceassociated with the PWS.2.1.9. DELIVERABLE. Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.2.1.10. GOVERNMENT-FURNISHED PROPERTY (GFP) OR GOVERNMENT PROPERTY (GP). Property in the possession of, or directly acquired by, the Government and subsequently made available to the Contractor.2.1.11. PIER-SIDE. When a vessel is moored (tied) up to the pier.2.1.12. PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.2.1.13. QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are acceptable IAW established standards and requirements of this contract.2.1.14. QUALITY ASSURANCE SPECIALIST. An official Government representative concerned with matters pertaining to the contract administration process and QA/QC. Acts as technical advisor to the Contracting Officer in these areas.2.1.15. QUALITY ASSURANCE SURVEILLANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.2.1.16. QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.2.1.17. ROOT CAUSE ANALYSIS. A diagnosis that identifies the specific cause of a part or parts premature failure specifically explains exactly why a part is failing and determine what needs to be done to fix it and to prevent future part failures...2.1.18. SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privity to contract with the subcontractor.2.1.19. WORK DAY. The number of hours per day the Contractor provides services IAW the contract.2.1.20. WORK WEEK. Monday tough Friday, except for Federal holidays unless specified otherwise.2.2. ACRONYMS:AR Army RegulationCG Cargo GearCFR Code of Federal RegulationsCMR Contractor Manpower ReportingCOR Contracting Officer's RepresentativeCOTR Contracting Officer's Technical RepresentativeDD250 Department of Defense Form 250 (Receiving Report)DFARS Defense Federal Acquisition Regulation SupplementDoD Department of DefenseFAR Federal Acquisition RegulationFFP Firm Fixed PriceGFP Government Furnished PropertyID IdentificationIAW In Accordance WithLPTA Lowest Price Technically AcceptableMICC Mission and Installation Contracting CommandNCIC National Crime Information CenterOCI Organizational Conflict of InterestOSHA Occupational Safety and Health AdministrationPOP Period Of PerformancePRS Performance Requirements SummaryPWS Performance Work StatementQA Quality AssuranceQASP Quality Assurance Surveillance PlanQC Quality ControlQCP Quality Control PlanRFQ Request for QuotationSAM System for Award ManagementPART 3GOVERNMENT FURNISHED PROPERTY (GFP), EQUIPMENT, AND SERVICES3. GOVERNMENT FURNISHED ITEMS AND SERVICES:3.1. Services: The Government will provide ship's crew to have the vessel available for inspection.3.2. Facilities: NA3.3. Utilities: Vessels being inspected and tested will generate the electrical power for the contractor's use during inspection and testing. The Contractor (to include subcontractors) shall instruct employees in utilities conservation practices. The contractor shall be responsible for operating under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount to accomplish cleaning vehicles and equipment.3.4 Materials: The Government will provide all documents pertaining to the vessel that are required for the inspection and certification. The government shall provide the current vessel logbooks.3.5 Operators: The Government will provide operators to operate equipment being tested during the process of the test.PART 4CONTRACTOR FURNISHED ITEMS AND SERVICES4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:4.1 General: The Contractor shall furnish all labor, supervision, supplies, equipment, materials, and services required to perform work under this contract that are not listed under Section 3 of this PWS.4.2 Secret Facility Clearance: N/APART 5SPECIFIC TASKS5. Specific Tasks:5.1. Basic Services:5.1.1. The contractor shall provide labor, material, equipment, and transportation necessary to inspect, test and certify all vessel lifting gear, winches, davits, and cranes for the equipment's annual OSHA testing and certification requirements in 29 CFR §1919 IAW this PWS and OSHA requirements provided in 29 CFR §1919.5.1.2. All work shall be performed pier-side at Fort Eustis, Virginia.5.1.3. The contractor shall remove and/or dispose of all debris as required.5.1.4. The contractor shall reinstall all non-defective parts and equipment removed during the inspection process.5.2. Annual Crane Inspection, Testing, and Certification (LCM-8, MOD-2)Crane Data:Manufacturer: Effer.Model: 2600 IE.Capacity: 1,000 Pounds at a 12-Foot Radius.Quantity: One (1).5.2.1 Task:5.2.1.1 To perform CG inspections, make necessary repairs and adjustments to CG, testing CG, ensure proper marking and posting of safe working loads, provide proof of load testing, and CG certification performed by accredited person(s) and an OSHA approved Agency as required for Gear Certification in 29 CFR § 1919. Contractor shall provide any and all labor and supplies needed to comply with the PWS requirements.5.2.1.2 All work shall be performed pier-side at Fort Eustis, Virginia.5.2.2 Requirements:5.2.2.3 An agency accredited by OSHA shall survey and proof load test the vessel's bow crane as specified by this item using 29 CFR §1919.5.2.2.4 The Contractor shall furnish the services of an agency accredited by OSHA's regulation 29 CFR §1919 to perform all inspections and to witness the vessel's CG's testing provides a certification complaint with 29 CFR §1919, proof of load testing, and proper safety load marking and posting5.2.2.5. Standard: a 100% compliance with OSHA applicable requirements provided in 29 CFR § 1919.5.2.2.6. Provide deliverable items according to CDRLs.5.2.3 Inspection and Certification: The Contractor shall furnish labor and equipment during performance by the contractor in the performance of the inspection and certification.5.2.3.1. Standard: a 100% compliance with OSHA applicable requirements provided in 29 CFR § 1919.5.2.3.2 Provide deliverable items according to CDRLs.5.2.4 Report: Upon completion of inspections, the Contractor shall furnish to the COR an original of a report listing parts and components recommended for repairs Report shall include unit price, part number, availability, and estimated labor.5.2.5 Testing:5.2.5.1 Furnish all necessary test equipment; prepare for and perform a proof load test of the 1,000 pound capacity bow crane at a 12-foot radius using the referenced CFR as a guide.5.2.5.2 Make all necessary adjustments to the control valve assembly. Retest as necessary to achieve satisfactory test.5.2.6 Crane Securing: Secure crane upon completion of testing.5.2.7 Certificates: The Contractor shall furnish an original of the crane certificate to the COR.5.3 ANNUAL CRANE, DAVIT, AND HOIST ASSEMBLIES INSPECTIONS, TESTING, AND CERTIFICATIONS (LCU)Vessel in Service Dates:USAV Runnymede, LCU 2001 - March 1989USAV Aldie, LCU 2004 - February 1990USAV Brandy Station, LCU 2005 - February 1990USAV Bristoe Station, LCU 2006 - April 1990USAV Chickahominy, LCU 2011 - September 1990USAV El Caney, LCU 2017 - March 1991USAV Hobkirk, LCU 2023 - August 1991Rescue Boat Crane Data:Manufacturer: Appleton Marine Inc.Model: SB4.1-14-14.Capacity: 4000 lbs. at 14 ft. radius.Quantity: One (1) each.Davit Assemblies Data:Socket Description: Fixed, Welded.Quantity: Four (4).Locations: Forward and Aft Main Deck, Port and Starboard Sides."J" Frame Description: Aluminum.Capacity: 1,000 Pounds Each.Quantity: Two (2) each per vesselLocations: Portable.Hoist Data:Description: Manual Chain HoistCapacity: 1,500 PoundsQuantity: Two (2) each per vesselLocation: PortableDescription: Manual Chain HoistCapacity: 3,000 PoundsQuantity: Two (2) each per vesselLocation: PortableDescription: Manual Chain HoistCapacity: 4,000 PoundsQuantity: One (1) each per vesselLocation: PortableDescription: Manual Wire Rope HoistCapacity: 1500 PoundsQuantity: Two (2) each per vesselLocation: Portable5.3.1 Task:5.3.1.1 Furnish the necessary test equipment as well as the services of an agency accredited by the OSHA to service, rig, operate, examine, perform proof load test, and certify the vessel's rescue boat crane, davit(s), and hoist(s) assemblies IAW 29 CFR §1919, Chapter XVII.5.3.1.2 Electrical power source shall be provided by the vessel's generators, operated by a Government furnished crew.5.3.1.3 All work shall be performed pier-side at Fort Eustis, Virginia.5.3.2 Requirements: Furnish the services of a contractor accredited by the OSHA to service, rig, operate, examine, perform proof load test, and certify the vessel's rescue boat crane, davit, and hoist(s) assemblies.5.3.3 Removals: Make removals as required for the performance of work as described in thisspecification item.5.3.4 Rescue Boat Crane Inspection: The Contractor shall furnish labor and equipment as required by the certifying agency in the performance of the agency's inspection.5.3.5 Rescue Boat Crane Servicing: Service and lubricate all machinery, pins, sheaves, blocks, wire rope cables, switches, rotating assembly.5.3.6 Rescue Boat Crane Load Test:5.3.6.1 Furnish all necessary test equipment; prepare for and perform a proof load test to certify the rescue boat crane for designed 4,000 lbs. lifting capacity at a 14 ft. radius, using the referenced CFR as a guide.5.3.6.2 Make adjustments to travel stops as required to limit swing radius as required in referenced drawing.5.3.6.3 Make all necessary adjustments to the rescue boat crane. Retest as necessary to achieve asatisfactory test.5.3.7 Davit Assemblies Load Testing: Furnish all necessary test equipment; prepare for and perform proof load tests to certify each davit socket and "J" frame for designed 1,000 lbs. lifting capacities using the referenced CFR as a guide.5.3.8 Hoist Assemblies Load Testing: Furnish all necessary test equipment; prepare for and perform proof load tests to certify each Hoist for manufacturer rated load lifting capacities using the referenced CFR as a guide.5.3.9 Rescue Boat Sling Testing and Inspection: Furnish all necessary test equipment; prepare for and perform the proof load test to certify the Rescue Boat Sling for 100% manufacturer rated load lifting capacities using the referenced CFR as a guide5.3.10 Report: During the performance of this specification item, the Contractor shall submit to the COR an original and four (4) copies of a report detailing any work required by the certifying agency prior to certification. This report shall include the part number, cost and availability of each part listed.5.3.11 Stenciling: Upon completion of successful testing, stencil rescue boat crane and each "J" frame IAW 29 CFR§ 1919, Chapter XVII,.5.3.11.1 Furnish to the COR a typewritten original of the Rescue Boat Crane, Davit, Rescue Boat Sling and each Hoist assembly certification.5.3.12 Rescue Boat Davit Securing: Upon completion of all testing, secure the rescue boat davit.5.3.13 Reinstallations: Reinstall all removals made for the performance of work as described in this specification item.5.4 ANNUAL CRANE, DAVIT, AND HOIST ASSEMBLIES INSPECTIONS, TESTING, AND CERTIFICATIONS (LSV)Vessel in Service Dates:USAV General Frank S. Besson Jr., LSV 1 - November 1987Rescue Boat Davit Data:Manufacturer: Allied Systems.Model: D5700CT.Capacity: 5,700 lbs.Quantity: One (1) eachLocation: 02 Level (Poop Deck).Davit Assemblies Data:Socket Description: Fixed, Welded.Quantity: Two (2).Locations: 02 Level (Poop Deck), Port and Starboard Sides."J" Frame Description: Aluminum.Capacity: 1,500 Pounds Each.Quantity: Two.Locations: Portable.Hoist Data:Description: Manual Chain HoistCapacity: 4,000 PoundsQuantity: One (1) each.Location: PortableDescription: Manual Chain HoistCapacity: 2,000 PoundsQuantity: One (1) each.Location: PortableDescription: Electric Chain HoistCapacity: 4,000 PoundsQuantity: One (1) eachLocation: PortableDescription: Pneumatic Chain HoistCapacity: 2,000 PoundsQuantity: One (1) eachLocation: Portable5.4.1 Task:5.4.1.1 Furnish the necessary test equipment as well as the services of an agency accredited by the OSHA to service, rig, operate, examine, perform proof load test, and certify the vessel's rescue boat crane, davit(s), and hoist(s) assemblies IAW 29 CFR § 1919, Chapter XVII,.5.4.1.2 Electrical power source shall be provided by the vessel's generators, operated by a Government furnished crew.5.4.1.3 Perform additional work as authorized by the Contracting Officer.5.4.1.4 All work shall be performed pier-side at Fort Eustis, Virginia.5.4.2 Requirements: Furnish the services of an agency accredited by the Occupational Safety andHealth Administration (OSHA) to service, rig, operate, examine, perform proof load test, and certify the vessel's rescue boat crane and associated davit assemblies.5.4.3 Removals: Make removals as required for the performance of work as described in thisspecification item.5.4.4 Rescue Boat Crane Inspection: The Contractor shall furnish labor and equipment as required by the certifying agency in the performance of the agency's inspection.5.4.5 Rescue Boat Crane Servicing: Service and lubricate all machinery, pins, sheaves, blocks, wire rope cables, switches, rotating assembly.5.4.6 Rescue Boat Crane Load Test:5.4.6.1 Furnish all necessary test equipment; prepare for and perform a proof load test to certify the rescue boat crane for designed 5,700 lbs. lifting capacity radius, using the referenced CFR as a guide.5.4.6.2 Make adjustments to travel stops as required to limit swing radius as required in referenced drawing.5.4.6.3 Make all necessary adjustments to the rescue boat crane. Retest as necessary to achieve asatisfactory test.5.4.7 Davit Assemblies Load Testing: Furnish all necessary test equipment; prepare for and perform proof load tests to certify each davit socket and "J" frame for designed 1,500 lbs. lifting capacities using the referenced CFR as a guide.5.4.8 Hoist Assemblies Load Testing: Furnish all necessary test equipment; prepare for and perform proof load tests to certify each Hoist for manufacturer rated load lifting capacities using the referenced CFR as a guide.5.4.9 Rescue Boat Sling Testing and Inspection: Furnish all necessary test equipment; prepare for and perform the proof load test to certify the Rescue Boat Sling for 100% manufacturer rated load lifting capacities using the referenced CFR as a guide5.4.10 Report: During the performance of this specification item, the Contractor shall submit to the COR an original report detailing any work required by the certifying agency prior to certification. This report shall include the part number, cost and availability of each part listed.5.4.11 Stenciling: Upon completion of successful testing, stencil rescue boat crane and each "J" frame IAW 29 CFR § 1919, Chapter XVII,.5.4.12 Certificates' Requirement:5.4.12.1 Furnish to the COR a typewritten original and four (4) copies of the Rescue Boat Crane, Davit, Rescue Boat Sling and Hoist assembly certification.5.4.13 Rescue Boat Davit Securing: Upon completion of all testing, secure the rescue boat davit.5.5 ANNUAL CRANE, RESCUE BOAT SLING AND HOIST INSPECTION, TESTING, AND CERTIFICATION (LT)Vessel in Service Dates:USAV MG Winfield Scott LT 805 - 1995Crane Data:Manufacturer: Appleton Marine Inc.Model: EB 10 - 35 - 15Capacity: 15,000 pounds at minimum radius and 3,000 pounds at a 35-foot radiusQuantity: One (1) eachLocation: 01 LevelHoist Data:Description: Manual Chain HoistCapacity: 1,500 PoundsQuantity: One (1) each.Location: PortableDescription: Manual Chain HoistCapacity: 4,000 PoundsQuantity: Two (2) each.Location: PortableDescription: Wire Rope HoistCapacity: 1,500 PoundsQuantity: Two (2) each.Location: Portable5.5.1 Task:5.5.1.1 Furnish the necessary test equipment as well as the services of an agency accredited by the OSHA to service, rig, operate, examine, perform proof load test, and certify the vessel's rescue boat crane, associated components, and hoist IAW 29 CFR §1919, Chapter XVII.5.5.1.2 Electrical power source shall be provided by the vessel's generators, operated by a Government furnished crew.5.5.1.3 Perform additional work as authorized by the Contracting Officer.5.5.1.4 All work shall be performed pier-side at Fort Eustis, Virginia.5.5.2 Requirements: Furnish the services of an agency accredited by the Occupational Safety andHealth Administration (OSHA) to service, rig, operate, examine, perform proof load test, and certify the vessel's rescue boat crane, associated components, and hoist.5.5.3 Removals: Make removals as required for the performance of work as described in thisspecification item.5.5.4 Rescue Boat Crane Inspection: The Contractor shall furnish labor and equipment as required by the certifying agency in the performance of the agency's inspection.5.5.5 Rescue Boat Crane Servicing: Service and lubricate all machinery, pins, sheaves, blocks, wire rope cables, switches, rotating assembly.5.5.6 Load Test Rescue Boat Crane:5.5.6.1 Furnish all necessary test equipment; prepare the rescue boat crane for and perform a proof load test for 3,000 pounds capacity at a 35-foot radius and 15,000 pounds capacity at a minimum radius using the referenced CFR as a guide.5.5.6.2 Make adjustments to travel stops as required to limit swing radius as required in referenced drawing.5.5.6.3 Make all necessary adjustments to the crane. Retest as necessary to achieve a satisfactory test.5.5.7 Hoist Assemblies Load Testing: Furnish all necessary test equipment; prepare for and perform proof load tests to certify each Hoist for manufacturer rated load lifting capacities using the referenced CFR as a guide.5.5.8 Rescue Boat Sling Testing and Inspection: Furnish all necessary test equipment; prepare for and perform the proof load test to certify the Rescue Boat Sling for 100% manufacturer rated load lifting capacities using the referenced CFR as a guide.5.5.9 Report: During the performance of this item, the Contractor shall submit to the ContractingOfficer's Representative an original and four (4) copies of a report detailing any work required by the certifying agency prior to the rescue boat crane's and hoist's certifications. This report shall include the part number, cost and availability of each part listed.5.5.10 Certificate Requirement: Furnish to the COR a typewrittenoriginal of the rescue boat davit, Rescue Boat Sling and hoist(s) certification.5.5.11 Rescue Boat Crane Securing: Upon completion of all testing, secure the rescue boat crane.5.5.12 Reinstallations: Reinstall all removals made for the performance of work as described in this specification item.5.6 ANNUAL SURVEY AND CERTIFICATION OF WINCH AND A-FRAME (MWT)A-Frame and Engine/Winch Data: Five (5) Vessels TotalDesignation: A-Frame, Two Leg, Five Stay.Lifting Capacity: 27,000 Pounds (When Load is Forward of Plane of A-Frame Legs).Quantity: One (1) eachDesignation: Deck Winch.Prime Mover: Detroit Diesel 4-53, Model 5043-8301.Deck Winch Drum Capacity: 700' of 1" Diameter Cable.Capacity: 27,000 pounds Bare Drum; 19,500 pounds Full DrumQuantity: One (1) each5.6.1 Task:5.6.1.1 Furnish the necessary test equipment and qualified personnel to rig, operate deck winch for test, examine A-frame structure and stay assemblies, perform proof load test, and certify the vessel's A-frame.5.6.1.2 Power source shall be furnished by the vessel's deck winch. Deck winch and associated prime mover shall be operated by a qualified Government furnished crew.5.6.1.3 All work shall be performed pier-side at Fort Eustis, Virginia.5.6.2 Certificate Requirement:5.6.2.1 The Contractor shall furnish the services of an agency accredited by the OSHA to proof load test the vessel's CG and associated components and issue associated certificate with 29 CFR§1919 , Chapter XVII,.5.6.2.2 The above agency shall issue a proof load test certificate accompanied by the agency's own certification authority.5.6.2.3 Furnish the COR a typewritten original) copy of the proof load test certification.5.6.3 Test Requirements:5.6.3.1 The Contractor shall perform, IAW the certifying agency's instructions, all tests and examinations required to issue a proof load test certificate for the vessel's A-frame.5.6.3.2 The Contractor shall disassemble and reassemble any blocks, rigging, or other components, which the certifying agency requires for examinations.5.6.3.3 The Contractor shall furnish the necessary test equipment and qualified personnel to rig, operate deck winch for test, examine A-frame structure and stay assemblies, perform proof load test, and certify the vessel's A-frame.5.6.3.4 Upon completion of inspection, submit to the COR an original copy of a typewritten report listing all defects found during the inspections and examinations by the certifying agency representative which must be corrected prior to the proof load certification of the vessel's A-frame. This report shall also contain the Contractor's recommendations for additional work and the Contractor's proposed price to the Government for these repairs.5.6.4 Test:5.6.4.1 Rig the vessel's gear in conformance with the certifying agency's requirements for testing.5.6.4.2 Perform tests and examinations required by the certifying agency, including dismantling,Re-installation and subsequent testing of CG and associated cargo handling components. All tests and examinations shall be performed in the presence of the COR.5.6.4.3 All certified weights required for test shall be furnished by the Contractor.5.6.4.4 Weight (loads) shall not be placed on or raised directly above or rotated over the main deck of the vessel.5.6.4.5 The Contractor shall ensure that the vessel's hull bottom does not ground or contact anysubmerged object during test.5.6.4.6 Upon completion of all tests and examinations which are required for certification, furnish the COR an original copy of the proof load test certificate. Secure A-frame and leave same ready for service.5.7 ANNUAL SURVEY AND CERTIFICATION OF WINCH AND A-FRAME (SLWT)A-Frame and Engine/Winch Data: One (1) Vessel TotalDesignation: A-Frame, Two Leg, Five Stay.Lifting Capacity: 27,000 Pounds (When Load is Forward of Plane of A-Frame Legs).Quantity: One (1) eachDesignation: Deck Winch.Prime Mover: Detroit Diesel 4-53, Model 5043-8301.Deck Winch Drum Capacity: 700' of 1" Diameter Cable.Capacity: 27,000 pounds Bare Drum; 19,500 pounds Full DrumQuantity: One (1) each5.7.1 Scope of Work:5.7.1.1 Furnish the necessary test equipment and qualified personnel to rig, operate deck winch for test, examine A-frame structure and stay assemblies, perform proof load test, and certify the vessel's A-frame.5.7.1.2 Power source shall be furnished by the vessel's deck winch. Deck winch and associated prime mover shall be operated by a qualified Government furnished crew.5.7.1.3 All work shall be performed pier-side at Fort Eustis, Virginia.5.7.2 Certificate Requirement:5.7.2.1 The Contractor shall furnish the services of an agency accredited by the OSHA to proof load test the vessel's CG and associated components and issue associated certificate with 29 CFR§1919 , Chapter XVII.5.7.2.2 The above agency shall issue a proof load test certificate accompanied by the agency's own certification authority.5.7.2.3 Furnish the COR a typewritten original copy of the proof load test certification.5.7.3 Test Requirements:5.7.3.1 The Contractor shall perform, IAW the certifying agency's instructions, all tests and examinations required to issue a proof load test certificate for the vessel's A-frame.5.7.3.2 The Contractor shall disassemble and reassemble any blocks, rigging, or other components, which the certifying agency requires for examinations.5.7.3.3 The Contractor shall furnish the necessary test equipment and qualified personnel to rig, operate deck winch for test, examine A-frame structure and stay assemblies, perform proof load test, and certify the vessel's A-frame.5.7.3.4 Upon completion of inspection, submit to the COR an original copy of a typewritten report listing all defects found during the inspections and examinations by the certifying agency representative which must be corrected prior to the proof load certification of the vessel's A-frame. This report shall also contain the Contractor's recommendations for additional work and the Contractor's proposed price to the Government for these repairs.5.7.4 Test:5.7.4.1 Rig the vessel's gear in conformance with the certifying agency's requirements for testing.5.7.4.2 Perform tests and examinations required by the certifying agency, including dismantling,reinstallation and subsequent testing of CG and associated cargo handling components. All tests and examinations shall be performed in the presence of the COR.5.7.4.3 All certified weights required for test shall be furnished by the Contractor.5.7.4.4 Weight (loads) shall not be placed on or raised directly above or rotated over the main deck of the vessel.5.7.4.5 The Contractor shall ensure that the vessel's hull bottom does not ground or contact anysubmerged object during test.5.7.4.6 Upon completion of all tests and examinations which are required for certification, furnish the COR an original copy of the proof load test certificate. Secure A-frame and leave same ready for service.5.8 Annual 558th Transportation Company Shop A-Frame and Hoist Inspection, Testing, and Certification Building 426.A-Frame Data:Designation: A-Frame, Four Legged, Portable.Lifting Capacity: 10,000 Pounds.Quantity: One (1) AssemblyHoist Data:Designation: Manual Chain HoistLifting Capacity: 8,000 Pounds.Quantity: One (1) each5.8.1 Scope of Work: Furnish the necessary test equipment and qualified personnel to rig, inspect, examine, and certify the A-frame and hoist.5.8.2 Certificate Requirement:5.8.2.1 The Contractor shall furnish the services of an agency accredited by the OSHA to proof load test the listed shop located A-frame and issue associated certificate IAW 29 CFR § 1919, Chapter XVII.5.8.2.2 The above agency shall issue a proof load test certificate accompanied by the agency's own certification authority.5.8.2.3 All work shall be performed at Building 426, Engine Rebuild Bay, Fort Eustis, Virginia.5.8.2.4 Furnish the COR a typewritten original of the proof load test certification.5.8.3 Test Requirements:5.8.3.1 The Contractor shall perform, IAW the certifying agency's instructions, all tests and examinations required to issue a proof load test certificate for the shop located A-frame and hoist.5.8.3.2 The Contractor shall disassemble and reassemble any blocks, rigging, or other components which the certifying agency requires for examinations.5.8.3.3 The Contractor shall furnish the necessary test equipment and qualified personnel to rig, inspect, examine, and certify the shop's A-frame.5.8.3.4 Upon completion of inspection, submit to the COR an original copy of a typewritten report listing all defects found during the inspections and examinations by the certifying agency representative which must be corrected prior to the certification of the shop's A frame. This report shall also contain the Contractor's recommendations for additional work and the Contractor's proposed price to the Government for these repairs.5.8.4 Test:5.8.4.1 Rig the A-frame in conformance with the certifying agency's requirements for testing.5.8.4.2 Perform tests and examinations required by the certifying agency, including dismantling,Re-installation and subsequent testing of A-frame. All tests and examinations shall be performed in the presence of the COR.5.8.4.3 All certified weights required for test shall be furnished by the Contractor.5.8.4.4 Upon completion of all tests and examinations which are required for certification, furnish the COR an original of the proof load test certificate. Secure A-frame and leave same ready for service.5.9. DELIVERABLES:5.9.1. Reports.5.9.1.1. During the performance of this specification item, the Contractor shall submit to the COR an original of a report detailing any work required by the certifying agency prior to certification. This report shall include the part number, cost and availability of each part listed.5.9.1.2. Upon completion of inspection, submit to the COR an original of a typewritten report listing all defects found during the inspections and examinations by the certifying agency representative which must be corrected prior to the proof load certification equipment. This report shall also contain the Contractor's recommendations for additional work and the Contractor's proposed price to the Government for these repairs.5.9.1.3. Upon completion of inspections, the Contractor shall furnish to the COR an original of a report listing parts and components recommended for renewal. Report shall include unit price, part number, availability, and estimated labor. Additional work and parts/components renewals shall be performed as authorized by the Contracting Officer.5.9.2 Certificates.5.9.2.1 Furnish to the COR a typewritten original of the rescue boat crane certification.5.9.2.2 Furnish to the COR a typewritten original of each davit assembly certification.5.9.2.3 Furnish to the COR a typewritten original of the rescue boat davit certification.5.9.2.4 Furnish the COR a typewritten original of the proof load test certificate.5.9.2.5 Upon completion of all tests and examinations which are required for certification, furnish the COR an original of the proof load test certificate. Secure A-frame and leave same ready for service.5.9.2.6 Furnish to the COR a typewritten original of each sling's certification.5.9.2.7 Certificate shall include date of testing, weight of test load, name of testing agency, signature of testing agency official, and workboat sling identifier.5.9.2.6 Furnish to the COR a typewritten original of each hoist's certification.5.9.2.6.1 Certificate shall include date of testing, weight of test load, name of testing agency, signature of testing agency official, and hoist identifier.5.10 Contractor Manpower Reporting (CMR): The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Department of the Army via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http://www.ecmra.mil, and then click on "Department of the Army CMRA" or the iconof the DoD organization that is receiving or benefitting from the contracted services. Reportinginputs shall be for the labor executed during the period of performance during each GovernmentFiscal Year (FY), which runs from October 1 tough September 30. While inputs may bereported any time during the FY, all data shall be reported no later than October 31 of eachcalendar year, beginning with 2013. Contractors may direct questions to the help desk by clicking on "Send an email" which is located under the Help Resources ribbon on the right sideof the login page of the applicable Service/Component's CMR website at http://www.ecmra.mil.As part of its submission, the contractor shall also provide the estimated total cost (if any) incurred to comply with this reporting requirement.PART 6APPLICABLE PUBLICATIONS6. APPLICABLE PUBLICATIONS (CURRENT EDITIONS)6.1. The Contractor (to include subcontractors) must abide by all applicable regulations, publications, manuals, and local policies and procedures.ANNUAL SURVEY AND CERTIFICATION OF A-FRAME (SHOP)Reference: CFR 29 CFR §1919ANNUAL WORK BOAT SLINGS INSPECTIONS AND CERTIFICATIONS (LCU, LSV, LT)Reference: Department of the Army Technical Bulletin 43-0142, dated 28 February 1997, entitled:"Safety Inspection and Testing of Lifting Devices."ANNUAL CRANE INSPECTION, TESTING, AND CERTIFICATION (LCM-8, MOD-2)References:US Army Aviation and Troop Command Drawing Number LCM82-95-179-001, entitled: "LCM-8, MOD-2, Fire Monitor and Crane Base Platforms."Department of the Army Technical Bulletin 43-0142, dated 28 February 1997, entitled: "Safety Inspection and Testing of Lifting Devices."29 CFR § 1919 ,, dated 2014.ANNUAL CRANE AND DAVIT ASSEMBLIES INSPECTIONS, TESTING, ANDCERTIFICATIONS (LCU)References:US Army Belvoir Research, Development and Engineering Center Drawing Number 13228E0898, Rev. B, entitled: "Boat Stowage & Handling & Misc. Davit Arr. & Det."US Army Technical Manual 55-1905-223-10, dated 17 Jan 89, entitled: "Operator's Manual for Landing Craft, Utility (LCU 2000 Class)."US Army Technical Manual 55-1905-223-24-18-1, dated 17 Jan 89, entitled: "Unit, Intermediate Direct Support, Intermediate General Support Maintenance Instructions, Landing Craft, Utility (LCU)."ANNUAL CRANE INSPECTION, TESTING, AND CERTIFICATION (LT)References:US Army Technical Manual 55-1925-273-10-1, dated 11 Feb 2013 entitled: "Operator's Manual for Inland and Coastal Large Tug (LT)."US Army Technical Manual 55-1925-294-14&P, dated 15 Feb 2013 entitled: "Operator, Unit, Direct Support and General Support Maintenance Manual Including Repair Parts and Special Tools List for Deck Machinery and Hydraulic System for Inland and Coastal Large Tug (LT)."Department of the Army Technical Bulletin 43-0142, dated 28 February 1997, entitled: "Safety Inspection and Testing of Lifting Devices."US Army Tank, Automotive and Armaments Command Drawing Number 12492694, entitled: "Deck Hydraulic System Modifications"Appleton Marine, Inc., Drawing Number AMD-1602, entitled: "Crane LMI System Assembly."ANNUAL SURVEY AND CERTIFICATION OF A-FRAME (SLWT, MWT)References:Department of the Army Technical Manual TM 55-1945-205-24-3-1, dated 30 August 2003, entitled "Modular Causeway System (MCS) Warping Tug (WT) WT-1."Department of the Army Technical Manual TM 55-3950-204-14&P Dated 30 November 2001, entitled "Winch System"Department of the Army Technical Manual TM 55-1945-203-14&P Dated 01 October 2007, entitled "Technical Manual for Operations and Maintenance Instruction, SLWT."PERFORMANCE REQUIREMENTS SUMMARYThe contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance teshold briefly describes the minimum acceptable levels of service required for each requirement. These tesholds are critical to mission success.Required Services Performance Measure Maximum Deviation Method of Surveillance Contractor Corrective Actions and Suspense Certification At the time ofInspection and before leaving the vessel None 100% Compliance Corrected document or deliverable and statement of actions to be taken to prevent recurrence within 5 calendar days of notification of the rejected deliverable.Report Provided to the COR 10 calendar days after completion of Certifications No more than 3 additional working days late. Documentation will have less than 3 factual errors per page Random Sampling of 50% of all documents of textual or report format. 100% Inspection of all spread sheet formatted reports. Corrected document or deliverable and statement of actions to be taken to prevent recurrence within 5 calendar days of notification of the rejected deliverable.Contractor Manpower Report Completed annually NLT 31 OCT Documentation will have less than 3 factual errors per page 100% Inspection Corrected document or deliverable and statement of actions to be taken to prevent recurrence within 5 calendar days of notification of the rejected deliverable.Note: Government surveillance of Contractor performance is not limited to the Performance Objectives as outlined in this PRS. The Government reserves the right to conduct compliance surveillance of any contractual requirement of this acquisition.Clauses Incorporated by Reference:FAR 52.203-12 Limitation on Payments to Influence Certain Federal Transactions (Oct 2010)FAR 52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights (Apr 2014)FAR 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper (May 2011)FAR 52.204-9 Personal Identity Verification of Contractor Personnel (Jan 2011)FAR 52.212-4 Contract Terms and Conditions-Commercial Items (May 2015)FAR 52.223-5 Pollution Prevention and Right-to-Know Information (May 2011)FAR 52.228-5 Insurance Work on a Government Installation (Jan 1997)FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Dec 2013)FAR 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (Apr 1984)FAR 52.242-13 Bankruptcy (Jul 1995)DFARS 252.201-7000 Contracting Officer's Representative (Dec 1991)DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (Sep 2011)DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights (Sep 2013)DFARS 252.204-7003 Control of Government Personnel Work Product (Apr 1992)DFARS 252.204-7012 Safeguarding of Unclassified Controlled Tech Info (Dec 2015)DFARS 252.204-7015 Disclosure of Info to Litigation Support Contractors (May 2016)DFARS 252.205-7000 Provision of Information to Cooperative Agreement Holders (Dec 1991)DFARS 252.209-7004 Subcontracting With Firms That Are Owned Or Controlled By The Government Of A Country That Is A State Sponsor Of Terrorism (Oct 2015)DFARS 252.223-7006 Prohibition On Storage, Treatment, And Disposal Of Toxic Or Hazardous Materials Basic (Sep 2014)DFARS 252.232-7003 Electronic Submission of Payment Requests (Jun 2012)Clauses Incorporated by Full Text:FAR 52.204-21 - Basic Safeguarding of Covered Contractor Information Systems (Jun 2016)(a) Definitions. As used in this clause--"Covered contractor information system" means an information system that is owned or operated by a contractor that processes, stores, or transmits Federal contract information."Federal contract information" means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government, but not including information provided by the Government to the public (such as on public Web sites) or simple transactional information, such as necessary to process payments."Information" means any communication or representation of knowledge such as facts, data, or opinions, in any medium or form, including textual, numerical, graphic, cartographic, narrative, or audiovisual (Committee on National Security Systems Instruction (CNSSI) 4009)."Information system" means a discrete set of information resources organized for the collection, processing, maintenance, use, sharing, dissemination, or disposition of information (44 U.S.C. 3502)."Safeguarding" means measures or controls that are prescribed to protect information systems.(b) Safeguarding requirements and procedures. (1) The Contractor shall apply the following basic safeguarding requirements and procedures to protect covered contractor information systems. Requirements and procedures for basic safeguarding of covered contractor information systems shall include, at a minimum, the following security controls:(i) Limit information system access to authorized users, processes acting on behalf of authorized users, or devices (including other information systems).(ii) Limit information system access to the types of transactions and functions that authorized users are permitted to execute.(iii) Verify and control/limit connections to and use of external information systems.(iv) Control information posted or processed on publicly accessible information systems.(v) Identify information system users, processes acting on behalf of users, or devices.(vi) Authenticate (or verify) the identities of those users, processes, or devices, as a prerequisite to allowing access to organizational information systems.(vii) Sanitize or destroy information system media containing Federal Contract Information before disposal or release for reuse.(viii) Limit physical access to organizational information systems, equipment, and the respective operating environments to authorized individuals.(ix) Escort visitors and monitor visitor activity; maintain audit logs of physical access; and control and manage physical access devices.(x) Monitor, control, and protect organizational communications (i.e., information transmitted or received by organizational information systems) at the external boundaries and key internal boundaries of the information systems.(xi) Implement subnetworks for publicly accessible system components that are physically or logically separated from internal networks.(xii) Identify, report, and correct information and information system flaws in a timely manner.(xiii) Provide protection from malicious code at appropriate locations within organizational information systems.(xiv) Update malicious code protection mechanisms when new releases are available.(xv) Perform periodic scans of the information system and real-time scans of files from external sources as files are downloaded, opened, or executed.(2) Other requirements. This clause does not relieve the Contractor of any other specific safeguarding requirements specified by Federal agencies and departments relating to covered contractor information systems generally or other Federal safeguarding requirements for controlled unclassified information (CUI) as established by Executive Order 13556.(c) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (c), in subcontracts under this contract (including subcontracts for the acquisition of commercial items, other than commercially available off-the-shelf items), in which the subcontractor may have Federal contract information residing in or transiting tough its information system.FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items. (Jun 2016)(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)).(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).X (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note).___ (5) [Reserved]X (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note). X (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).___ (10) [Reserved]X (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).___ (ii) Alternate I (Nov 2011) of 52.219-3.___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).___ (ii) Alternate I (Jan 2011) of 52.219-4.___ (13) [Reserved]___ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).___ (ii) Alternate I (Nov 2011).___ (iii) Alternate II (Nov 2011).___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).___ (ii) Alternate I (Oct 1995) of 52.219-7.___ (iii) Alternate II (Mar 2004) of 52.219-7.X (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637 (d)(4)).___ (ii) Alternate I (Oct 2001) of 52.219-9.___ (iii) Alternate II (Oct 2001) of 52.219-9.___ (iv) Alternate III (Oct 2015) of 52.219-9.___ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).X (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).___ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657f).X (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)).___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).X (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).___ (26) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126).X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).X (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).X (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).X (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).X (31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).X (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).X (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).X (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)___ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)___ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O.13693).___ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).___ (38) (i) 52.223-13, Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514___ (ii) Alternate I (Oct 2015) of 52.223-13.___ (39) (i) 52.223-14, Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and 13514).___ (ii) Alternate I (Jun 2014) of 52.223-14.___ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).___ (41) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).___ (ii) Alternate I (Jun 2014) of 52.223-16.X (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513).___ (43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).___ (44) 52.223-21, Foams (Jun 2016) (E.O. 13696).___ (45) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).___ (46) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).___ (ii) Alternate I (May 2014) of 52.225-3.___ (iii) Alternate II (May 2014) of 52.225-3.___ (iv) Alternate III (May 2014) of 52.225-3.___ (47) 52.225-5, Trade Agreements (Feb 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).X (48) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).___ (49) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).___ (50) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).___ (51) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).___ (52) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505), 10 U.S.C. 2307(f)).___ (53) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).X (54) 52.232-33, Payment by Electronic Funds Transfer- System for Award Management (Jul 2013) (31 U.S.C. 3332).___ (55) 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management (Jul 2013) (31 U.S.C. 3332).___ (56) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).___ (57) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).___ (58) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).___ (ii) Alternate I (Apr 2003) of 52.247-64.(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:___ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495)X (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67.).X (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).This Statement is for Information Only: It is not a Wage DeterminationEmployee Class Monetary Wage -- Fringe BenefitsEngineer III GS-12X (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C.206 and 41 U.S.C. chapter 67).___ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).___ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67).___ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67).X (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).___ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792).___ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition teshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).(v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).(vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).(viii) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.(x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).(xi) X (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).(xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.(xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.FAR 52.217-9 Option to Extend the Term of the Contract (Mar 2000)(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days of the current period of performance expiration; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires. The preliminary notice does not commit the Government to an extension.(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 60 months.FAR 52.252-2 Clauses Incorporated by Reference (Feb 1998)This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address:http://farsite.hill.af.milDFARS 252.232-7006 Wide Area Workflow Payment Instructions (May 2013)(a) Definitions. As used in this clause-"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization."Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF)."Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.(c) WAWF access. To access WAWF, the Contractor shall-(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests tough WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:(1) Document type. The Contractor shall use the following document type(s). Provided at award(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. Provided at award(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.Routing Data Table*Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC Provided at awardIssue By DoDAAC Provided at awardAdmin DoDAAC Provided at awardInspect By DoDAAC Provided at awardShip To Code Provided at awardShip From Code Provided at awardMark For Code Provided at awardService Approver (DoDAAC) Provided at awardService Acceptor (DoDAAC) Provided at awardAccept at Other DoDAAC Provided at awardLPO DoDAAC Provided at awardDCAA Auditor DoDAAC Provided at awardOther DoDAAC(s) Provided at award(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. Provided at award(g) WAWF point of contact.(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. Provided at award(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.5152.233-4000 AMC-Level Protest Program (Feb 2014) (Local Clause)Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer. However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.Headquarters U.S. Army Materiel CommandOffice of Command Counsel-Deputy Command Counsel4400 Martin RoadRm: A6SE040.001 Redstone Arsenal, AL 35898-5000Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.milThe AMC-Level Protest procedures are found at: http://www.amc.army.mil/amc/commandcounsel.html.If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.Provisions Incorporated by Reference:FAR 52.204-7 System for Award Management (Jul 2013)FAR 52.212-1 Instructions to Offerors-Commercial Items (Oct 2015)DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials (Nov 2011)DFARS 252.204-7004 Alternate A, System for Award Management (Feb 2014)DFARS 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls (Dec 2015) (Dec 2015)DFARS 252.204-7011 Alternative Line Item Structure (Sep 2011)DFARS 252.222-7007 Representation Regarding Combating Trafficking In Persons (Jan 2015)Provisions Incorporated by Full Text:FAR 52.209-7 Information Regarding Responsibility Matters (Jul 2013)(a) Definitions. As used in this provision-"Administrative proceeding" means a non-judicial process that is adjudicatory in nature in order to make a determination of fault or liability (e.g., Securities and Exchange Commission Administrative Proceedings, Civilian Board of Contract Appeals Proceedings, and Armed Services Board of Contract Appeals Proceedings). This includes administrative proceeding at the Federal and State level but only in connection with performance of a Federal contract or grant. It does not include agency actions such as contract audits, site visits, corrective plans, or inspection of deliverables."Federal contracts and grants with total value greater than $10,000,000" means-(1) The total value of all current, active contracts and grants, including all priced options; and(2) The total value of all current, active orders including all priced options under indefinite-delivery, indefinite-quantity, 8(a), or requirements contracts (including task and delivery and multiple-award Schedules)."Principal" means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager; head of a division or business segment; and similar positions).(b) The offeror [_] has [_] does not have current active Federal contracts and grants with total value greater than $10,000,000.(c) If the offeror checked "has" in paragraph (b) of this provision, the offeror represents, by submission of this offer, that the information it has entered in the Federal Awardee Performance and Integrity Information System (FAPIIS) is current, accurate, and complete as of the date of submission of this offer with regard to the following information:(1) Whether the offeror, and/or any of its principals, has or has not, within the last five years, in connection with the award to or performance by the offeror of a Federal contract or grant, been the subject of a proceeding, at the Federal or State level that resulted in any of the following dispositions: (i) In a criminal proceeding, a conviction.(ii) In a civil proceeding, a finding of fault and liability that results in the payment of a monetary fine, penalty, reimbursement, restitution, or damages of $5,000 or more.(iii) In an administrative proceeding, a finding of fault and liability that results in-(A) The payment of a monetary fine or penalty of $5,000 or more; or (B) The payment of a reimbursement, restitution, or damages in excess of $100,000.(iv) In a criminal, civil, or administrative proceeding, a disposition of the matter by consent or compromise with an acknowledgment of fault by the Contractor if the proceeding could have led to any of the outcomes specified in paragraphs (c)(1)(i), (c)(1)(ii), or (c)(1)(iii) of this provision.(2) If the offeror has been involved in the last five years in any of the occurrences listed in (c)(1) of this provision, whether the offeror has provided the requested information with regard to each occurrence.(d) The offeror shall post the information in paragraphs (c)(1)(i) tough (c)(1)(iv) of this provision in FAPIIS as required tough maintaining an active registration in the System for Award Management database via https://www.acquisition.gov (see 52.204-7).FAR 52.233-2 Service of Protest (Sep 2006)(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from:Mission and Installation Contracting Command Fort Eustis705 Washington Boulevard, Suite 102Fort Eustis, VA 23604(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO.FAR 52.212-2 Evaluation -- Commercial Items (Oct 2014)(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:(i) technical capability of the item/service offered to meet the Government requirement;(ii) Price;(iii) Past performance (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.FAR 52.212-3 Offeror Representations and Certifications -- Commercial Items (July 2016)The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed tough http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) tough (r) of this provision.(a) Definitions. As used in this provision--"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program."Forced or indentured child labor" means all work or service-(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties."Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner."Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation," means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c)."Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except-(1) PSC 5510, Lumber and Related Basic Wood Materials;(2) Product or Service Group (PSG) 87, Agricultural Supplies;(3) PSG 88, Live Animals;(4) PSG 89, Subsistence;(5) PSC 9410, Crude Grades of Plant Materials;(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;(8) PSC 9610, Ores;(9) PSC 9620, Minerals, Natural and Synthetic; and(10) PSC 9630, Additive Metal Materials."Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture."Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor."Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;(3) Consist of providing goods or services to marginalized Populations of Sudan;(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;(5) Consist of providing goods or services that are used only to promote health or education; or(6) Have been voluntarily suspended.Sensitive technology-(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-(i) To restrict the free flow of unbiased information in Iran; or(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3))."Service-disabled veteran-owned small business concern"-(1) Means a small business concern-(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16)."Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR § 121 and size standards in this solicitation."Small disadvantaged business concern, consistent with 13 CFR §124.1002," means a small business concern under the size standard applicable to the acquisition, that--(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR §124.105) by--(i) One or more socially disadvantaged (as defined at 13 CFR§ 124.103) and economically disadvantaged (as defined at 13 CFR §124.104) individuals who are citizens of the United States; and(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR §124.104(c)(2); and(2) The management and daily business operations of which are controlled (as defined at 13.CFR §124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition."Subsidiary" means an entity in which more than 50 percent of the entity is owned-(1) Directly by a parent corporation; or(2) Tough another subsidiary of a parent corporation."Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often tough acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances."Veteran-owned small business concern" means a small business concern-(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and(2) The management and daily business operations of which are controlled by one or more veterans."Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern --(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and(2) Whose management and daily business operations are controlled by one or more women."Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR § 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite.(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed tough https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) tough (r) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.](c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.(1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern.(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern.(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR §124.1002.(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition teshold.(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-(i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-(i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR §127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern.(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:___________________________________________(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--(i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR§126; and(ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR §126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.(11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) of this provision.)[The offeror shall check the category in which its ownership falls]:____ Black American.___ Hispanic American.___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).___ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal).___ Individual/concern, other than one of the preceding.(d) Representations required to implement provisions of Executive Order 11246 --(1) Previous contracts and compliance. The offeror represents that --(i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and(ii) It [_] has, [_] has not, filed all required compliance reports.(2) Affirmative Action Compliance. The offeror represents that --(i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR§ 60-1 and 60-2), or(ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American - Supplies, is included in this solicitation.)(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies."(2) Foreign End Products:LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary](3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.(g)(1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.)(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Baainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act."(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Baainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Free Trade Agreement Country End Products (Other than Baainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary](iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product."Other Foreign End Products:LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary](iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Canadian End Products:Line Item No.:___________________________________________[List as necessary](3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act'':Canadian or Israeli End Products:Line Item No.: Country of Origin:[List as necessary](4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Baainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Free Trade Agreement Country End Products (Other than Baainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:Line Item No.: Country of Origin:[List as necessary](5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled "Trade Agreements."(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.Other End ProductsLine Item No.: Country of Origin:[List as necessary](iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition teshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals--(1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [_] Have, [_] have not, within a tee-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and(3) [_] Are, [_] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and(4) [_] Have, [_] have not, within a tee-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.(i) Taxes are considered delinquent if both of the following criteria apply:(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.(ii) Examples.(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights.(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code).(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).](1) Listed End ProductListed End Product: Listed Countries of Origin:(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.][_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.[_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-(1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [_] Outside the United States.(k) Certificates regarding exemptions from the application of the Service Contract Labor Standards. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) (1) [_] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [_] does [_] does not certify that-(i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations;(ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and(iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers.(2) [_] Certain services as described in FAR 22.1003-4(d)(1). The offeror [_] does [_] does not certify that-(i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations;(ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii));(iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and(iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers.(3) If paragraph (k)(1) or (k)(2) of this clause applies-(i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and(ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause.(l) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.)(1) All offerors must submit the information required in paragraphs (l)(3) tough (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS).(2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.(3) Taxpayer Identification Number (TIN).[_] TIN:_____________________.[_] TIN has been applied for.[_] TIN is not required because:[_] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;[_] Offeror is an agency or instrumentality of a foreign government;[_] Offeror is an agency or instrumentality of the Federal Government;(4) Type of organization.[_] Sole proprietorship;[_] Partnership;[_] Corporate entity (not tax-exempt);[_] Corporate entity (tax-exempt);[_] Government entity (Federal, State, or local);[_] Foreign government;[_] International organization per 26 CFR §1.6049-4;[_] Other ____________________.(5) Common parent.[_] Offeror is not owned or controlled by a common parent:[_] Name and TIN of common parent:Name ____________________________________TIN ______________________________________(m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan.(n) Prohibition on Contracting with Inverted Domestic Corporations-(1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.(2) Representation. The offeror represents that-(i) It [ ] is, [ ] is not an inverted domestic corporation; and(ii) It [ ] is, [ ] is not a subsidiary of an inverted domestic corporation.(o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran.(1) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov.(2) Representation and Certification. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror-(i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and(iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,500 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50(U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf).(3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if-(i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and(ii) The offeror has certified that all the offered products to be supplied are designated country end products.(p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a DUNS Number in the solicitation.(1) The Offeror represents that it [ ] has or [ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture.(2) If the Offeror indicates "has" in paragraph (p)(1) of this provision, enter the following information:Immediate owner CAGE code:_____________________________________________Immediate owner legal name:______________________________________________(Do not use a "doing business as" name)Is the immediate owner owned or controlled by another entity:[ ] Yes or [ ] No.(3) If the Offeror indicates "yes" in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:Highest level owner CAGE code:_____________________________________________Highest level owner legal name:______________________________________________(Do not use a "doing business as" name)(q) Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law.(1) As required by section 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that-(i) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless and agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or(ii) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.(2) The Offeror represents that--(i) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and (ii) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.(r) Predecessor of Offeror. (Applies in all solicitations that include the provision at 52.204-16, Commercial and Government Entity Code Reporting.)(1) The Offeror represents that it [ ] is or [ ] is not a successor to a predecessor that held a Federal contract or grant within the last tee years.(2) If the Offeror has indicated "is" in paragraph (r)(1) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last tee years (if more than one predecessor, list in reverse conological order):Predecessor CAGE code ______(or mark "Unknown).Predecessor legal name: _________________________. (Do not use a "doing business as" name).FAR 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998)This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this address:http://farsite.hill.af.milWD 15-4341 (Rev.-2) was first posted on www.wdol.gov on 01/05/2016************************************************************************************REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABORTHE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATIONBy direction of the Secretary of Labor | WAGE AND HOUR DIVISION| WASHINGTON D.C. 20210|||| Wage Determination No.: 2015-4341Daniel W. Simms Division of | Revision No.: 2Director Wage Determinations| Date Of Revision: 12/29/2015_______________________________________|____________________________________________Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract Act for which the solicitation was issued on or after January 1, 2015. If thiscontract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher)for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available atwww.dol.gov/whd/govcontracts.____________________________________________________________________________________States: North Carolina, VirginiaArea: North Carolina County of Currituck Virginia Counties of Chesapeake, Gloucester, Hampton, Isle of Wight, James City, Mathews, Newport News, Norfolk, Poquoson, Portsmouth, Suffolk, Surry, Virginia Beach, Williamsburg, York____________________________________________________________________________________**Fringe Benefits Required Follow the Occupational Listing**OCCUPATION CODE - TITLE FOOTNOTE RATE01000 - Administrative Support And Clerical Occupations01011 - Accounting Clerk I 14.0301012 - Accounting Clerk II 15.7401013 - Accounting Clerk III 17.6101020 - Administrative Assistant 23.4801035 - Court Reporter 18.8201041 - Customer Service Representative I 11.2901042 - Customer Service Representative II 12.7001043 - Customer Service Representative III 13.8601051 - Data Entry Operator I 12.4101052 - Data Entry Operator II 13.9001060 - Dispatcher, Motor Vehicle 17.2301070 - Document Preparation Clerk 13.2101090 - Duplicating Machine Operator 13.2101111 - General Clerk I 12.2001112 - General Clerk II 13.7801113 - General Clerk III 15.4701120 - Housing Referral Assistant 19.1101141 - Messenger Courier 13.4401191 - Order Clerk I 13.4601192 - Order Clerk II 17.6101261 - Personnel Assistant (Employment) I 16.2201262 - Personnel Assistant (Employment) II 18.1401263 - Personnel Assistant (Employment) III 20.2301270 - Production Control Clerk 25.9301290 - Rental Clerk 14.1501300 - Scheduler, Maintenance 15.3201311 - Secretary I 15.3201312 - Secretary II 17.1501313 - Secretary III 19.1101320 - Service Order Dispatcher 15.4001410 - Supply Technician 23.4801420 - Survey Worker 13.8201460 - Switchboard Operator/Receptionist 12.2801531 - Travel Clerk I 11.7301532 - Travel Clerk II 12.5101533 - Travel Clerk III 13.3601611 - Word Processor I 14.1301612 - Word Processor II 15.8601613 - Word Processor III 17.7505000 - Automotive Service Occupations05005 - Automobile Body Repairer, Fiberglass 25.8205010 - Automotive Electrician 21.0305040 - Automotive Glass Installer 20.0905070 - Automotive Worker 20.0905110 - Mobile Equipment Servicer 18.1505130 - Motor Equipment Metal Mechanic 22.0205160 - Motor Equipment Metal Worker 20.0905190 - Motor Vehicle Mechanic 22.0205220 - Motor Vehicle Mechanic Helper 17.1305250 - Motor Vehicle Upholstery Worker 19.1005280 - Motor Vehicle Wrecker 20.0905310 - Painter, Automotive 21.0305340 - Radiator Repair Specialist 19.1005370 - Tire Repairer 13.6505400 - Transmission Repair Specialist 22.0207000 - Food Preparation And Service Occupations07010 - Baker 11.4807041 - Cook I 11.1207042 - Cook II 12.3307070 - Dishwasher 8.7307130 - Food Service Worker 9.8907210 - Meat Cutter 15.3507260 - Waiter/Waitress 9.6809000 - Furniture Maintenance And Repair Occupations09010 - Electrostatic Spray Painter 21.2309040 - Furniture Handler 14.6709080 - Furniture Refinisher 19.3909090 - Furniture Refinisher Helper 15.8009110 - Furniture Repairer, Minor 17.6209130 - Upholsterer 20.1711000 - General Services And Support Occupations11030 - Cleaner, Vehicles 11.4111060 - Elevator Operator 11.4111090 - Gardener 13.6711122 - Housekeeping Aide 11.9211150 - Janitor 11.9211210 - Laborer, Grounds Maintenance 11.4111240 - Maid or Houseman 9.3011260 - Pruner 11.6311270 - Tractor Operator 12.8811330 - Trail Maintenance Worker 11.4111360 - Window Cleaner 12.6412000 - Health Occupations12010 - Ambulance Driver 16.8412011 - Breath Alcohol Technician 16.4212012 - Certified Occupational Therapist Assistant 26.2312015 - Certified Physical Therapist Assistant 25.0512020 - Dental Assistant 15.5612025 - Dental Hygienist 34.4412030 - EKG Technician 26.1012035 - Electroneurodiagnostic Technologist 26.1012040 - Emergency Medical Technician 16.8412071 - Licensed Practical Nurse I 14.6712072 - Licensed Practical Nurse II 16.4212073 - Licensed Practical Nurse III 18.3012100 - Medical Assistant 13.6912130 - Medical Laboratory Technician 18.7012160 - Medical Record Clerk 15.1312190 - Medical Record Technician 16.9312195 - Medical Transcriptionist 14.1312210 - Nuclear Medicine Technologist 31.3212221 - Nursing Assistant I 9.9312222 - Nursing Assistant II 11.1712223 - Nursing Assistant III 12.1912224 - Nursing Assistant IV 13.6812235 - Optical Dispenser 19.9912236 - Optical Technician 16.5912250 - Pharmacy Technician 17.3312280 - Phlebotomist 13.8412305 - Radiologic Technologist 25.6712311 - Registered Nurse I 24.3712312 - Registered Nurse II 29.8112313 - Registered Nurse II, Specialist 29.8112314 - Registered Nurse III 36.0712315 - Registered Nurse III, Anesthetist 36.0712316 - Registered Nurse IV 43.2312317 - Scheduler (Drug and Alcohol Testing) 20.3412320 - Substance Abuse Treatment Counselor 17.9613000 - Information And Arts Occupations13011 - Exhibits Specialist I 20.4613012 - Exhibits Specialist II 25.3613013 - Exhibits Specialist III 29.1913041 - Illustrator I 20.0013042 - Illustrator II 24.5613043 - Illustrator III 29.8013047 - Librarian 32.6713050 - Library Aide/Clerk 11.4513054 - Library Information Technology Systems 23.82Administrator13058 - Library Technician 16.7813061 - Media Specialist I 17.1713062 - Media Specialist II 19.2113063 - Media Specialist III 21.4113071 - Photographer I 13.9313072 - Photographer II 18.4613073 - Photographer III 22.4313074 - Photographer IV 24.9013075 - Photographer V 30.1413090 - Technical Order Library Clerk 14.9313110 - Video Teleconference Technician 15.9314000 - Information Technology Occupations14041 - Computer Operator I 15.5614042 - Computer Operator II 17.4014043 - Computer Operator III 19.4114044 - Computer Operator IV 21.5714045 - Computer Operator V 23.8814071 - Computer Programmer I (see 1) 20.0714072 - Computer Programmer II (see 1) 24.5714073 - Computer Programmer III (see 1)14074 - Computer Programmer IV (see 1)14101 - Computer Systems Analyst I (see 1)14102 - Computer Systems Analyst II (see 1)14103 - Computer Systems Analyst III (see 1)14150 - Peripheral Equipment Operator 15.5614160 - Personal Computer Support Technician 21.5714170 - System Support Specialist 26.4715000 - Instructional Occupations15010 - Aircrew Training Devices Instructor (Non-Rated) 33.2415020 - Aircrew Training Devices Instructor (Rated) 40.2115030 - Air Crew Training Devices Instructor (Pilot) 48.0415050 - Computer Based Training Specialist / Instructor 33.2415060 - Educational Technologist 30.2615070 - Flight Instructor (Pilot) 48.0415080 - Graphic Artist 24.2815085 - Maintenance Test Pilot, Fixed, Jet/Prop 36.5015086 - Maintenance Test Pilot, Rotary Wing 36.5015088 - Non-Maintenance Test/Co-Pilot 36.5015090 - Technical Instructor 23.0315095 - Technical Instructor/Course Developer 28.1715110 - Test Proctor 19.2915120 - Tutor 19.2916000 - Laundry, Dry-Cleaning, Pressing And Related Occupations16010 - Assembler 8.8316030 - Counter Attendant 8.8316040 - Dry Cleaner 11.0816070 - Finisher, Flatwork, Machine 8.8316090 - Presser, Hand 8.8316110 - Presser, Machine, Drycleaning 8.8316130 - Presser, Machine, Shirts 8.8316160 - Presser, Machine, Wearing Apparel, Laundry 8.8316190 - Sewing Machine Operator 11.8416220 - Tailor 12.6516250 - Washer, Machine 9.5919000 - Machine Tool Operation And Repair Occupations19010 - Machine-Tool Operator (Tool Room) 23.5119040 - Tool And Die Maker 26.8321000 - Materials Handling And Packing Occupations21020 - Forklift Operator 16.5921030 - Material Coordinator 25.9321040 - Material Expediter 25.9321050 - Material Handling Laborer 11.2721071 - Order Filler 11.4921080 - Production Line Worker (Food Processing) 16.5921110 - Shipping Packer 15.2121130 - Shipping/Receiving Clerk 15.2121140 - Store Worker I 12.7621150 - Stock Clerk 15.9621210 - Tools And Parts Attendant 16.5921410 - Warehouse Specialist 16.5923000 - Mechanics And Maintenance And Repair Occupations23010 - Aerospace Structural Welder 25.6223019 - Aircraft Logs and Records Technician 20.0423021 - Aircraft Mechanic I 24.4023022 - Aircraft Mechanic II 25.6223023 - Aircraft Mechanic III 26.8123040 - Aircraft Mechanic Helper 17.9923050 - Aircraft, Painter 22.2223060 - Aircraft Servicer 20.0423070 - Aircraft Survival Flight Equipment Technician 22.2223080 - Aircraft Worker 21.0923091 - Aircrew Life Support Equipment (ALSE) Mechanic I 21.0923092 - Aircrew Life Support Equipment (ALSE) Mechanic II 24.40 23110 - Appliance Mechanic 19.2423120 - Bicycle Repairer 14.4323125 - Cable Splicer 25.6923130 - Carpenter, Maintenance 19.2423140 - Carpet Layer 18.7923160 - Electrician, Maintenance 22.2723181 - Electronics Technician Maintenance I 23.0723182 - Electronics Technician Maintenance II 24.3223183 - Electronics Technician Maintenance III 25.5323260 - Fabric Worker 19.5923290 - Fire Alarm System Mechanic 20.2023310 - Fire Extinguisher Repairer 18.1523311 - Fuel Distribution System Mechanic 21.9423312 - Fuel Distribution System Operator 17.8723370 - General Maintenance Worker 18.3023380 - Ground Support Equipment Mechanic 24.4023381 - Ground Support Equipment Servicer 20.0423382 - Ground Support Equipment Worker 21.0923391 - Gunsmith I 18.1523392 - Gunsmith II 20.1623393 - Gunsmith III 22.2223410 - Heating, Ventilation And Air-Conditioning Mechanic 20.4523411 - Heating, Ventilation And Air Conditioning 21.48Mechanic (Research Facility)23430 - Heavy Equipment Mechanic 22.0323440 - Heavy Equipment Operator 20.2023460 - Instrument Mechanic 21.1623465 - Laboratory/Shelter Mechanic 12.4023470 - Laborer 11.2723510 - Locksmith 20.6523530 - Machinery Maintenance Mechanic 22.3123550 - Machinist, Maintenance 21.2523580 - Maintenance Trades Helper 16.2923591 - Metrology Technician I 21.1623592 - Metrology Technician II 24.2423593 - Metrology Technician III 25.2623640 - Millwright 26.5223710 - Office Appliance Repairer 19.2423760 - Painter, Maintenance 19.2423790 - Pipefitter, Maintenance 22.0923810 - Plumber, Maintenance 21.0423820 - Pneudraulic Systems Mechanic 22.2223850 - Rigger 22.5723870 - Scale Mechanic 20.1323890 - Sheet-Metal Worker, Maintenance 21.5223910 - Small Engine Mechanic 20.1123931 - Telecommunications Mechanic I 25.3523932 - Telecommunications Mechanic II 26.6223950 - Telephone Lineman 25.1723960 - Welder, Combination, Maintenance 20.9823965 - Well Driller 21.9223970 - Woodcraft Worker 22.2223980 - Woodworker 18.1524000 - Personal Needs Occupations24550 - Case Manager 13.3124570 - Child Care Attendant 9.5824580 - Child Care Center Clerk 13.4824610 - Chore Aide 8.4324620 - Family Readiness And Support Services 13.31Coordinator24630 - Homemaker 14.2425000 - Plant And System Operations Occupations25010 - Boiler Tender 22.8825040 - Sewage Plant Operator 20.0125070 - Stationary Engineer 22.8825190 - Ventilation Equipment Tender 17.3825210 - Water Treatment Plant Operator 20.0127000 - Protective Service Occupations27004 - Alarm Monitor 17.0327007 - Baggage Inspector 12.5227008 - Corrections Officer 18.7127010 - Court Security Officer 20.2927030 - Detection Dog Handler 15.3127040 - Detention Officer 18.7127070 - Firefighter 19.6527101 - Guard I 12.5227102 - Guard II 15.3127131 - Police Officer I 22.0727132 - Police Officer II 24.5228000 - Recreation Occupations28041 - Carnival Equipment Operator 10.4728042 - Carnival Equipment Repairer 11.1028043 - Carnival Worker 8.5428210 - Gate Attendant/Gate Tender 14.3028310 - Lifeguard 12.2228350 - Park Attendant (Aide) 15.6028510 - Recreation Aide/Health Facility Attendant 11.6828515 - Recreation Specialist 19.8328630 - Sports Official 12.7528690 - Swimming Pool Operator 15.6329000 - Stevedoring/Longshoremen Occupational Services29010 - Blocker And Bracer 22.8029020 - Hatch Tender 22.8029030 - Line Handler 22.8029041 - Stevedore I 21.6829042 - Stevedore II 23.9830000 - Technical Occupations30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 36.4930011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.1730012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.7130021 - Archeological Technician I 18.8530022 - Archeological Technician II 20.9330023 - Archeological Technician III 25.1430030 - Cartographic Technician 26.6830040 - Civil Engineering Technician 25.1530051 - Cryogenic Technician I 23.1530052 - Cryogenic Technician II 25.5630061 - Drafter/CAD Operator I 18.8530062 - Drafter/CAD Operator II 21.0930063 - Drafter/CAD Operator III 23.5230064 - Drafter/CAD Operator IV 28.9330081 - Engineering Technician I 17.8230082 - Engineering Technician II 19.7930083 - Engineering Technician III 22.5930084 - Engineering Technician IV 27.4230085 - Engineering Technician V 33.5430086 - Engineering Technician VI 40.5830090 - Environmental Technician 24.0630095 - Evidence Control Specialist 20.9030210 - Laboratory Technician 21.9930221 - Latent Fingerprint Technician I 22.9730222 - Latent Fingerprint Technician II 25.3730240 - Mathematical Technician 26.6830361 - Paralegal/Legal Assistant I 16.0430362 - Paralegal/Legal Assistant II 19.8830363 - Paralegal/Legal Assistant III 24.3230364 - Paralegal/Legal Assistant IV 29.4230375 - Petroleum Supply Specialist 25.5630390 - Photo-Optics Technician 26.6830395 - Radiation Control Technician 25.5630461 - Technical Writer I 23.1030462 - Technical Writer II 28.2430463 - Technical Writer III 34.1730491 - Unexploded Ordnance (UXO) Technician I 23.1930492 - Unexploded Ordnance (UXO) Technician II 28.0630493 - Unexploded Ordnance (UXO) Technician III 33.6330494 - Unexploded (UXO) Safety Escort 23.1930495 - Unexploded (UXO) Sweep Personnel 23.1930501 - Weather Forecaster I 23.1530502 - Weather Forecaster II 28.1530620 - Weather Observer, Combined Upper Air Or (see 2,3) 23.52Surface Programs30621 - Weather Observer, Senior (see 2,3) 25.4831000 - Transportation/Mobile Equipment Operation Occupations31010 - Airplane Pilot 28.0631020 - Bus Aide 12.7731030 - Bus Driver 16.1331043 - Driver Courier 13.4031260 - Parking and Lot Attendant 9.2531290 - Shuttle Bus Driver 14.2231310 - Taxi Driver 11.5031361 - Truckdriver, Light 14.2231362 - Truckdriver, Medium 15.5931363 - Truckdriver, Heavy 17.7531364 - Truckdriver, Tractor-Trailer 17.7599000 - Miscellaneous Occupations99020 - Cabin Safety Specialist 13.6899030 - Cashier 8.9599050 - Desk Clerk 9.2299095 - Embalmer 25.9799130 - Flight Follower 23.1999251 - Laboratory Animal Caretaker I 10.8599252 - Laboratory Animal Caretaker II 11.5299260 - Marketing Analyst 23.8199310 - Mortician 30.7699410 - Pest Controller 15.6699510 - Photofinishing Worker 11.6199710 - Recycling Laborer 16.4699711 - Recycling Specialist 18.5799730 - Refuse Collector 15.1799810 - Sales Clerk 11.0499820 - School Crossing Guard 11.7499830 - Survey Party Chief 19.8299831 - Surveying Aide 12.3799832 - Surveying Technician 18.0299840 - Vending Machine Attendant 14.2199841 - Vending Machine Repairer 16.6499842 - Vending Machine Repairer Helper 14.21 ____________________________________________________________________________________ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per monthVACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Cistmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may notlist a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs dutieswithin the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wagedetermination.Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of: (1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications; (2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications; (3) The design, documentation, testing, creation or modification of computerprograms related to machine operating systems; or (4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If youwork at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sundaypremium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).3) WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of aregular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basicrate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).** HAZARDOUS PAY DIFFERENTIAL **An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.** UNIFORM ALLOWANCE **If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, StandardForm 1444 (SF-1444) **Conformance Process:The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wagedetermination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interestedparties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wagedetermination to which a class(es) is to be conformed. The process for preparing a conformance request is as follows:1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S. Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).Information required by the Regulations must be submitted on SF-1444 or bond paper.When preparing a conformance request, the "Service Contract Act Directory of occupations" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)).
W911S0-16-T-0022 Department of the Army Materiel Command Mission and Installation Contracting Command Fort Eustis
9/19/16, 9:13 AM