Purchase Order NNX16CG47P

Award Date 6/10/16
Potential Completion Date 12/9/16
Potential Value $124K
Ultimate Awardee
Not listed
Federal Contract Vehicle
Set-Aside Type
Total Small Business
Extent Competed
Full and Open Competition after exclusion of sources
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Larkspur, CO 80118, USA
Solicitation Procedures
Negotiated Proposal / Quote
Number Of Offers Received
500
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
SBIR Program Phase I Action
Primary Consortia Member
Not listed
Similar Awards
This is a Small Business Innovation Research (SBIR) Phase I contract awarded by the National Aeronautics and Space Administration (NASA) to Advalue Photonics Inc., a minority-owned small disadvantaged business located in Tucson, Arizona. The $123,260 firm-fixed-price contract is for the design and fabrication of an erbium-doped fiber laser capable of producing high-pulse energy at the 1.55-micron wavelength. This laser system is intended to enable coherent lidar and sensing applications for...
The National Aeronautics and Space Administration (NASA) awarded a $124,961.00 Firm Fixed Price contract to Aqwest, LLC, a for-profit Limited Liability Company, for the development of a "Compact and Efficient High-Pulse Energy 2-Micron LIDAR Transmitter" under the Small Business Innovation Research (SBIR) program Phase I. The contract has a completion date of March 1, 2021 and was awarded on August 31, 2020. Aqwest, LLC specializes in photonics, thermal management, and energy...
This is a Small Business Innovation Research (SBIR) Phase II contract awarded by NASA to Nlight Inc., a leading provider of high power semiconductor and fiber lasers for industrial, microfabrication, aerospace and defense applications. The contract, valued at $597,473.58, is for the design and fabrication of a diode pumped Er:YAG micro-chip laser capable of varied repetition rates and high pulse energies using a single emitter-based high brightness pump. This laser system is intended to...
Advalue Photonics Inc., a minority-owned and small disadvantaged business, was awarded a $123,551.00 firm-fixed-price Small Business Innovation Research (SBIR) Phase I contract by the National Aeronautics and Space Administration (NASA) Shared Services Center. The contract is to demonstrate and build a 1.572 micron single frequency high pulse energy and high peak power fiber laser using an innovative erbium-doped gain fiber with a large core diameter and high gain per unit length. This laser...
This is a $125,000.00 firm fixed price Small Business Innovation Research (SBIR) Phase I contract awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to N.p. Photonics, Inc., a U.S.-based fiber laser manufacturer. The contract is for the development of a high energy, narrow-linewidth, and frequency stable 780 nanometer laser transmitter for high spectral resolution lidar (HSRL) applications. This laser system will enable accurate aerosol and cloud profiling...
This is a $124,975.00 Firm Fixed Price purchase order contract awarded by the Shared Services Center, a civilian federal agency, to Aqwest, LLC, a small business LLC based in Larkspur, Colorado. The contract is for the development of a novel, compact, and rugged high-peak power blue laser in the 0.45-0.49 μm range, based on a frequency-quadrupling of 1.9-μm laser output from ceramic Tm:Lu2O3, a new high-performance solid-state laser material. This is a Small Business Innovation Research (SBIR)...
This SBIR Phase I contract, awarded by NASA to Fibertek, Inc., a small business manufacturer, funds the development of a prototype 100-watt thulium (Tm) fiber laser suitable for NASA spaceflight and long-duration UAV missions. The laser is designed to provide the 1940 nm peak pump power needed to generate 80 mJ/pulse for Integrated Path Differential Absorption (IPDA) LIDAR, enabling simultaneous measurements of CO2 and water vapor from a low-Earth orbit satellite. The $124,883 firm-fixed-price...
This contract was awarded by the Shared Services Center, a civilian agency, to Beyond Photonics, LLC, a small business prime contractor, for the development of a highly compact, efficient next-generation single-frequency pulsed transmitter laser. The objective is to support NASA's current and future missions focused on laser remote sensing in the short-wave infrared wavelength region near two microns. The $124,948.00 firm fixed-price contract is for a Phase I Small Business Innovation Research...
This is a $3,180,246.00 firm fixed price federal contract awarded by the National Aeronautics and Space Administration (NASA) to Fibertek, Inc., a small business manufacturer of advanced photonics and engineering services. The contract is for the design of an erbium-doped yttrium aluminum garnet (Er:YAG) laser transmitter, which will advance the technology readiness level (TRL) to 6. The project is funded through NASA's Small Business Innovation Research (SBIR) Program Phase III, which...
This is a NASA SBIR Phase II contract awarded to Fibertek, Inc., a small business manufacturer specializing in advanced photonics and engineering services. Under this $2,581,999.00 contract, Fibertek will design, build, and test a hardened version of a single-frequency, end-pumped laser with an optical-to-optical efficiency of X%. The contractor will also perform breadboard amplifier tests to demonstrate energy scaling to "X" MJ/pulse and ultraviolet (UV) output to "X" W...

This is a Small Business Innovation Research (SBIR) Phase I contract awarded by the National Aeronautics and Space Administration (NASA) to Aqwest, LLC, a small business located in Larkspur, Colorado. The contract, valued at $123,944, is for the development of a novel, compact, and rugged high-peak power erbium (Er) laser amplifier at 1.5 microns to be used in NASA's remote sensing transmitters. Aqwest will leverage its expertise in edge-pumped disk laser (EPDL) technology, which it has successfully developed for the U.S. Army, Navy, and Department of Energy. During Phase I, Aqwest will use its existing models to determine the feasibility of the 1.5-micron EPDL-based laser amplifier, design and fabricate an optimized laser disk, and test its performance. If successful, Phase II will involve the design, fabrication, testing, and delivery of a prototype 1.5-micron EPDL laser amplifier.

Generated 4/3/25, 2:35 AM