Purchase Order GSFPNBTJ4295

The General Services Administration awarded Wright Tool Company, LLC a $13,350 fixed price with economic price adjustment contract to supply abrasive flat wheels for Resource Conservation and Recovery Act program requirements. The wheels measure 4.5 inches in diameter with a .875 inch arbor hole and .125 inch thickness, and have a 20-25 degree grinding angle and 40 grit zirconia abrasive bonded to a cloth backing. Performance will occur in Warren, Michigan under the RC2 Blanket Purchase...

This federal contract award is for abrasive wheels to Wright Tool Company LLC from the General Services Administration (GSA) Federal Acquisition Service. The contract calls for aluminum oxide screening grit wheels that are 4.5 inches in diameter, 0.875 inches in hole diameter, and 0.25 inches in thickness. The wheels will be used for abrasive applications. The $1.31 million contract was awarded under the GSA RC2 Blanket Purchase Agreement vehicle. Wright Tool Company LLC will perform the work in...

The General Services Administration (GSA) awarded a firm fixed price purchase order to GP Interprises Inc., doing business as GPI Federal, for wheel, abrasive, aluminum oxide, 90 grit, straight style, rubber binder bond, measuring 1.00 inch in outer diameter, 0.125 inch thick, with a 0.062 inch arbor hole. Performance will take place in San Antonio, Texas, over a one month period concluding on August 13, 2023. GSA procures a wide range of goods and services through various contracting vehicles...

The General Services Administration (GSA) awarded a firm fixed price purchase order to GP Interprises Inc., doing business as GPI Federal, for the delivery of abrasive aluminum oxide wheels. Under this contract, GPI Federal will provide wheels that are 90 grit, 1.00 inch in outer diameter, 0.125 inch thick, with a 0.062 inch arbor hole and rubber binder bond. All items will be delivered to the place of performance in San Antonio, Texas no later than September 20, 2023. The GSA Federal...

Giga, Inc. has been awarded a firm fixed price purchase order valued at fifty-five dollars by the General Services Administration (GSA) Federal Acquisition Service to deliver one aluminum oxide depressed center hub grinding wheel measuring 0.250 inches thick with a 625 inch 11-thread arbor hole and 7.00 inch diameter. Performance will occur in Macon, Georgia by March 3, 2024. No set-aside provision was applied to this procurement for a single WHEEL, ABRASIVE GRINDING, ALUMINUM OXIDE, DEPRESSED...

GSA awarded a firm fixed-price purchase order valued at approximately $98 to F&M Micro Products Inc. to deliver abrasive aluminum oxide wheels measuring 0.250 inch thick with a 0.625-11 arbor hole and 4.500 inch diameter. Performance will occur in Lake Balboa, California under a three-month period of performance concluding in October 2023. The prime contractor will fulfill the agency's requirement for the specified wheel dimensions and composition to support GSA operations. No additional...

The General Services Administration awarded a delivery order against The Tools Man Inc.'s Multiple Award Schedule contract for tapered edge silicon carbide grinding wheels with a rubber binder. The wheels will measure 5/8 inch in diameter, have an arbor hole of 1/16 inch, and an overall thickness of 3/32 inch for use at speeds up to 25,000 revolutions per minute. With a potential value of $0, the order was awarded as a fixed price contract with economic price adjustment terms. Performance will...

Wright Tool Company, LLC was awarded a $158,350 fixed-price with economic price adjustment contract by the General Services Administration (GSA) Federal Acquisition Service to supply abrasive wheels under the agency's Research Category 2 (RC2) Blanket Purchase Agreement vehicle. The contract calls for Wright Tool to provide Wheel, Abrasive, Flat, 20-25 Degree Angle, Flap Disk, Zirconia Abrasive, 40 Grit, Cloth Backing, .125 Thickness, .875 Inch Arbor Hole Diameter, 4.500 Inch Wheel Diameter,...

The General Services Administration Federal Acquisition Service awarded Wright Tool Company, LLC a $44,520 fixed price with economic price adjustment contract to supply abrasive wheels under the RC2 Blanket Purchase Agreement vehicle. The contract calls for Wright Tool to provide Wheel, Abrasive, Flat, 20-25 Degree Angle, Flap Disk, Zirconia Abrasive, 40 Grit, Cloth Backing, 0.125 Thickness, 0.875 Inch Arbor Hole Diameter, 4.500 Inch Wheel Diameter, 10-25 Degree Grinding Angle. Performance...

Wright Tool Company, LLC has been awarded a $5,100 contract under the General Services Administration's (GSA) Federal Acquisition Service RC2 Blanket Purchase Agreement vehicle to supply abrasive wheels to the agency. The fixed-price contract with economic price adjustment calls for the delivery of aluminum oxide abrasive wheels with a 24 grit size, 27 depressed center, 0.875 inch hole diameter, 0.25 inch thickness, and 4.5 inch width to an address in Warren, Michigan by November 5, 2023. As the...