Purchase Order FA700023P0092
Award Date
9/30/23
Potential Completion Date
1/28/24
Potential Value
$85K
Federal Agency
Air Force Academy
Awardee
X-Cal Corp
Ultimate Awardee
Not listed
NAICS Category
333248 - All Other Industrial Machinery Manufacturing
Federal Contract Vehicle
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Katy, TX 77494, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
6
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
The Department of the Air Force Headquarters Air Force Academy awarded a $259,513 firm fixed price purchase order to High Country Technology Consultants, LLC, a small business, for the delivery of one FORTUS 380MC 3D printer. The order was awarded on January 10, 2017 with a completion date of February 27, 2017. High Country Technology Consultants, LLC will provide the 3D printer to support the Department of the Air Force's additive manufacturing programs at the Air Force Academy located in...
<p>The Department of the Air Force Headquarters Air Force Academy awarded a purchase order for a STRATASYS FORTUS 450 FDM 3D Printer to High Country Technology Consultants, LLC, a small business. The firm-fixed-price contract has a potential value of $156,030.12 and a completion date of September 30, 2020. The 3D printer is being procured under Section 889 of the solicitation. This contract appears to be a standalone purchase order rather than part of a larger vehicle.</p>
The Department of the Air Force Headquarters Air Force Academy awarded a Firm Fixed Price purchase order to Paydarfar Industries, Inc., a for-profit, subchapter S corporation, to provide a Markforged Metal X 3D Printer, Sintering Oven, Washing Station, and on-site setup and basic operator training. The total potential value of the contract is $127,980.00. There is no set-aside designation. Paydarfar Industries has been a federal contractor since at least 2006, providing engineering software,...
This is a $249,000.00 firm fixed-price purchase order contract awarded by the U.S. Air Force Academy to 3D Systems, Inc., a for-profit manufacturer of 3D printing solutions, for a high-precision stereolithographic (SLA) 3D printer. The contract does not have a set-aside designation. The 3D printer will be used by the Academy's Department of Aeronautics to rapidly prototype highly accurate models for cadet capstone and research programs. This award was a sole-source contract, as the government...
The Department of the Air Force awarded a $590,700 firm fixed price purchase order to Open Additive, LLC for a 3D metal printer to meet the requirements specified in the FA860122R0018 solicitation issued by the Air Force Materiel Command Lifecycle Management Center. The solicitation sought proposals for an additive metal 3D printer with a build volume of not greater than 6x6x10 inches and the ability to heat the build plate to 500 degrees Celsius, to be delivered to and installed at the Air...
The U.S. Air Force awarded a $14,300 firm-fixed-price purchase order to 3D Systems, Inc. for stereolithography maintenance services at the United States Air Force Academy in Colorado. This contract is not set aside for any small business designation. 3D Systems, Inc. is a subsidiary of 3D Systems Corporation, a leading provider of 3D printing solutions to the federal government. The award supports the Air Force Academy's additive manufacturing capabilities, likely providing equipment...
The Department of the Air Force Air Education and Training Command awarded a fixed-price purchase order to Phoenix Analysis & Design Technologies Inc. (PADT), a small business contractor, for the acquisition of a Stratasys Fortus 450MC 3D Printer or an equal item. The contract, valued at $157,400.00, was set aside for small businesses and has a completion date of September 2, 2019. PADT, a manufacturer of 3D printing products and services, has previously supported Department of Defense...
This firm-fixed-price purchase order for a 3D printer was awarded by the Department of the Air Force Air Education and Training Command to Phoenix Analysis & Design Technologies Inc. (PADT), a small business manufacturer. The contract has a potential value of $239,422.00 and a completion date of October 9, 2020. The solicitation was set aside for small businesses. PADT has previously provided 3D printers, resin removal equipment, and other products and services to various Department of...
The Department of the Air Force Air Education and Training Command awarded a firm-fixed-price purchase order to Desktop Metal Operating, Inc., a for-profit manufacturer of 3D printing systems, materials, parts, and services, for the DM STUDIO 3D PRINTER. The potential value of the contract is $155,000.00. The contract has a total small business set-aside designation and the place of performance is Tyndall Air Force Base in Florida. Through past awards, Desktop Metal Operating, Inc. has...
The Department of the Air Force Air Education and Training Command awarded a firm-fixed-price purchase order contract for a 3D printer to Technical & Educational Training Aids, Inc. (dba Prototyping Solutions), a small business contractor, on September 13, 2018. The contract has a potential value of $214,672.00 and a completion date of September 27, 2018. The original solicitation was issued as a total small business set-aside. Through prior contract awards, Prototyping Solutions has...