Purchase Order 80NSSC22P0158
Award Date
11/5/21
Potential Completion Date
11/15/21
Potential Value
$89K
Federal Agency
Shared Services Center
Awardee
Creaform USA Inc.
Ultimate Awardee
Ametek Inc.
PSC Category
7E20 - IT and Telecom - End User: Help Desk;Tier 1-2,Workspace,Print,Output,Productivity Tools (HW/Perp SW)
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Not Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Hampton, VA 23681, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
This is a purchase order issued by the National Aeronautics and Space Administration (NASA) Shared Services Center to Creaform USA Inc., a for-profit manufacturer that provides 3D scanning and metrology solutions. The $109,735.00 fixed-price contract is for the acquisition of a Metrascan 750 Elite distance measurement and robot calibration device. No set-aside designation is mentioned. Creaform has received over $1.5 million in federal prime contracts from organizations like the Department of...
This federal contract award to Creaform USA Inc., a subsidiary of Ametek Inc., is for the purchase of the company's HandyScan 3D line-up of portable, metrology-grade 3D scanners. The $101,531.00 firm-fixed-price contract was awarded by the Non-Franchise Acquisition Services division of a civilian federal agency. The scanners and associated software are primarily used by the Department of Defense and NASA for aircraft and weapons system design, prototyping, quality assurance, testing, and...
This is a firm-fixed-price purchase order contract awarded by the Naval Air Warfare Center (NAVAIRAWC) to Creaform USA Inc., a subsidiary of Ametek Inc. that specializes in portable and automated 3D measurement technologies. The contract, valued at $12,220.00, is for the supply of Creaform's 3D scanning hardware, software, and related services, including MetraSCAN CMM portable 3D multi-sensor scanning systems, HandyScan handheld 3D scanners, and MAXSHOT photogrammetric hardware add-ons. These...
The U.S. Department of the Air Force, National Air and Space Intelligence Center (NASIC) awarded a firm-fixed-price purchase order worth $126,260.00 to Creaform USA Inc., a for-profit manufacturer, to provide NASIC with the HANDYSCAN 700 portable 3D scanning system. The contract has no set-aside designation and was awarded on September 5, 2018 with a completion date of October 5, 2018. Creaform has received over $1.5 million in federal prime contracts and purchase orders since 2019, primarily to...
This federal contract award, with ID 80NSSC23PC292, is a purchase order valued at $41,630.00 placed by the Shared Services Center (a civilian agency) with Creaform USA Inc., a for-profit manufacturer of 3D measurement technologies. The contract is for the procurement of a MAXSHOT 3D Photogrammetric Singularly Registered Volume Hardware Add-on, to be delivered by September 23, 2023. Creaform USA Inc. is a subsidiary of Ametek Inc. and has previously served as both a prime contractor and...
This firm-fixed-price purchase order was awarded by the U.S. Army Training and Doctrine Command (TRADOC) to Creaform USA Inc., a subsidiary of Ametek Inc. and manufacturer of portable 3D measurement technologies. The contract is for the supply of a HandyScan 700 handheld self-positioning laser scanner system, including the scanner unit and VXelements software, at a ceiling value of $97,510.00. The contract was not set aside for any special program. Creaform USA Inc. has served as both a prime...
This is a firm-fixed-price purchase order awarded by the Headquarters Division of a civilian federal agency to Creaform USA Inc., a for-profit manufacturer of 3D scanning technologies. The $93,540.00 contract is for the supply of scanning devices, and has an ultimate completion date of May 15, 2019. Creaform USA Inc. has established itself as a key provider of 3D scanning solutions to federal agencies, including the Department of Defense and NASA, through both prime contracts and subcontractor...
NASA awarded a $18,128 firm fixed price purchase order to Polyga Inc. of Ottawa, Canada to deliver a Polyga Compact C506 Monochrome Industrial Macro 3D scanner along with C, S, and H Series travel cases and a tripod. The solicitation sought these specific products and services to support NASA programs. As the sole awardee, Polyga will provide the 3D scanner and accessories from their Canada location for use at a selected NASA center between July 6 and August 17, 2023. The award was made...
The National Aeronautics and Space Administration (NASA) awarded a $142,575 firm fixed price purchase order to 3D Infotech Rohit Khanna Division for the delivery of a MetraSCAN BLACK Elite scanning system. Per the solicitation, 3D Infotech will provide the scanning system, installation, training, and maintenance/support services to NASA's Ames Research Center located in Irvine, California. The solicitation sought the scanning system to support NASA/NSSC requirements, with a period of performance...
This is a firm-fixed-price purchase order awarded by the Naval Sea Systems Command (NAVSEA), a defense agency, to Creaform USA Inc., a manufacturer of portable 3D measurement technologies. The contract is for the supply of Creaform's HandyScan BLACK ELITE handheld 3D scanners, with a ceiling value of $79,000.00 and a period of performance through July 31, 2023. The contract does not have a set-aside designation. As a subsidiary of Ametek Inc., Creaform USA Inc. has a history of providing 3D...