Purchase Order 47QSSC24P09TY
Award Date
1/13/24
Potential Completion Date
4/12/24
Potential Value
$39
Federal Agency
Federal Acquisition Service
Awardee
Timber Edge Machine Inc.
Ultimate Awardee
Not listed
NAICS Category
332216 - Saw Blade and Handtool Manufacturing
PSC Category
5120 - Hand Tools, Nonedged, Nonpowered
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Not Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Stevensville, MT 59870, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
GSA awarded a firm fixed price purchase order to Timber Edge Machine Inc. to provide two key, socket head screws measuring 3/4 inch in overall length and 6-5/8 inches in material length. The steel screws will feature two indentions 1/2 inch from one end located on the corners 180 degrees apart, as specified in ASME B18.3-2003 for socket cap, shoulder and set screws. Performance will occur in Stevensville, Montana. The potential value of $38 reflects the exact amount stated in the award with no...
The General Services Administration (GSA) awarded Timber Edge Machine Inc. a firm fixed price purchase order valued at thirty-eight thousand five hundred dollars ($38,500) to provide socket head screws in accordance with ASME B18.3-2003 standards. Performance will take place in Stevensville, Montana from September 16, 2023 through December 15, 2023. The solicitation requested hex and spline keys with specified dimensions, indentations, and steel material. As part of GSA's Federal Acquisition...
The General Services Administration (GSA) awarded Kaufman Company, Inc. a firm fixed-price purchase order valued at approximately $168,000 to provide socket head screws meeting American Society of Mechanical Engineers specifications. The screws will feature a 2mm key on both ends, a short series designation, an oxide coating, and an L-handle. Exceptions to the specification include a long arm length of 46 to 50mm. Performance will take place in Norwood, Massachusetts over approximately three...
The General Services Administration (GSA) awarded Timber Edge Machine Inc. a firm fixed price purchase order valued at approximately $138,000 to provide screwdriver attachments, specifically socket wrenches with 1/4 inch hexagonal drive sockets and 10 inch steel shafts. The tools will feature oxide coatings on both the sockets and bits. Delivery of the manually operated screwdriver attachments is to be made to Stevensville, Montana between September and December 2023. No subcontractors or set...
<p>GSA awarded Supplies Now Inc. a delivery order against its Multiple Award Schedule contract for $0.00 to provide socket head screws meeting ASME B18.3-2003 specifications. The firm fixed price order calls for 1/16 inch long steel socket cap, shoulder and set screws with an oxidized coating and screwdriver handle. Performance will occur in Lake Worth, Florida by April 27, 2021. No set-aside was used for this order to fulfill GSA's needs through its Federal Acquisition Service vehicle.</p>
This delivery order, awarded by GSA Federal Acquisition Service, is for the procurement of key, socket head screws meeting ASME B18.3.2M-1979 specifications. The screws are to be two millimeters at both ends, have an L-handle, and a long arm length between 46 and 50 millimeters. There is no set-aside designation. Idsc Holdings LLC, doing business as Snap-On Industrial and a division of Snap-On Incorporated, will provide the screws for thirty-two dollars under its GSA Multiple Award Schedule...
This delivery order, awarded by GSA Federal Acquisition Service, is for the purchase of key, socket head screws meeting ASME B18.3.2M-1979 specifications. The screws are to be two millimeters at both ends, have an L-handle, and a long arm length between 46 and 50 millimeters. There is no set-aside designation. Idsc Holdings LLC, doing business as Snap-On Industrial and a division of Snap-On Incorporated, will provide the screws for thirty-two dollars under its GSA Multiple Award Schedule...
The General Services Administration (GSA) awarded Kaufman Company, Inc. a firm fixed-price purchase order valued at $27,080 to provide socket head screws and keys in accordance with ASME B18.3-2003 standards. Performance will take place in Norwood, Massachusetts over a three-month period concluding in mid-December 2023. Key products include 0.05-inch steel socket head screws with oxide coating and replaceable-bit screwdriver handles. An exception to the specification was noted but not described....
The General Services Administration (GSA) awarded a firm fixed price purchase order valued at $29,340 to Kaufman Company, Inc. doing business as Kaufman Co Inc. for socket head screws meeting ASME B18.3-2003 specifications. Performance will take place in Norwood, Massachusetts from September 29, 2023 through December 13, 2023. The award is for L-type socket head screws with short overall lengths between 6-7/32 and 6-13/32 inches and long arm lengths between 5-21/32 and 5-27/32 inches to...
The General Services Administration (GSA) awarded Kaufman Company, Inc. a $88,100 firm fixed-price purchase order to supply socket head screws meeting ASME specifications. Under the terms of the award, Kaufman Co will provide KEY, SOCKET HEAD SCREW: IAW ASME B18.3-2003, SOCKET CAP, SHOULDER AND SET SCREWS, HEX AND SPLINE KEYS with the specified dimensions and materials. Performance will occur in Norwood, Massachusetts over a three-month period concluding in mid-December 2023. As GSA utilizes...