Purchase Order 47QSSC24P08WV
Award Date 1/9/24
Potential Completion Date 6/7/24
Potential Value $4.7K
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- Kipper Tool Company has been awarded a purchase order contract valued at nine hundred thirty-five dollars by the General Services Administration Federal Acquisition Service to provide a portable pneumatic die grinder motor. The solicitation requested a 90 degree angle grinder motor with an overall length of six inches, weight of 1.4 pounds, free speed of 12,000 RPM, and operating air pressures of 90 PSI consuming 14 CFM through a 0.25 inch NPT air inlet and collet size. The contract has a...
- Kipper Tool Company has been awarded a purchase order contract valued at five thousand six hundred fifteen dollars and forty-six cents ($5,615.46) by the General Services Administration Federal Acquisition Service. The contract has a small business set aside designation. Kipper Tool Company will provide a pneumatic portable grinder motor with an angle of ninety degrees, overall length of six inches, and weight of one point four pounds. The motor has a free speed of twelve thousand revolutions...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at approximately $1,927.82 by the General Services Administration (GSA) Federal Acquisition Service to provide a portable pneumatic die grinder motor. The motor to be delivered under this contract will have key specifications including a 90 degree angle, 6 inch overall length, 1.4 pound weight, 12,000 RPM free speed, operating air pressures of 90 PSI, and 14 CFM air consumption. Performance will take place in...
- The General Services Administration (GSA) awarded Kipper Tool Company a $4,687 purchase order to provide portable pneumatic die grinders for use by GSA. Under the firm fixed price contract, Kipper Tool will deliver grinders with a 90 degree angle, 6-inch overall length, 1.4 pound weight, 12,000 RPM free speed, and 0.25-inch collet size. Performance will take place in Gainesville, Georgia over 5 months from December 2023 through May 2024. The award was set aside for total small businesses as part...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $9,639.10 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide a portable pneumatic die grinder motor. The motor to be delivered under this contract will have a 90 degree angle, measure 6 inches in overall length, weigh 1.4 pounds, and operate at 12,000 RPM with an air pressure of 90 PSI and consumption of 14 CFM. The air inlet will be 0.25 NPT and the collet size will be 0.25...
- Kipper Tool Company has been awarded a $1,849 purchase order by the U.S. General Services Administration's (GSA) Federal Acquisition Service to provide one pneumatic horizontal grinder. The contract is a firm fixed price order for the requested product, as detailed in an attached statement of work. Performance will occur in Gainesville, Georgia over a one-month period concluding in mid-August 2023. The award is set aside for total small businesses. As a leading provider of industrial power tools...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $9,639.10 by the General Services Administration (GSA) Federal Acquisition Service to provide a portable pneumatic grinder motor. Under the contract, Kipper Tool will deliver one GRINDER, DIE, PNEUMATIC, PORTABLE motor with a 90 degree angle, 6-inch overall length, 1.4 pound weight, 12,000 RPM free speed, 90 PSI and 14 CFM operating air pressures, 0.25 NPT air inlet, and 0.25-inch collet size. Place of performance...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $937.41 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide a portable pneumatic grinder motor. The motor to be delivered under this contract has specifications including a 90-degree angle, 6-inch overall length, 1.4-pound weight, 12,000 RPM free speed, 90 PSI and 14 CFM operating air pressures, and a 0.25-inch collet size. Place of performance will be in Gainesville, Georgia and...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $3,833.64 by the General Services Administration (GSA) Federal Acquisition Service to provide a portable pneumatic grinder motor. The motor to be delivered under this contract will have a 90 degree angle, measure 6 inches in overall length, weigh 1.4 pounds, and achieve a free speed of 12,000 revolutions per minute. It will operate on air pressures of 90 pounds per square inch and consume 14 cubic feet of air per...
- Kipper Tool Company has been awarded a $4,196.73 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide a portable pneumatic die grinder and related accessories. The contract has a period of performance from July 8, 2023 through August 7, 2023. Pricing is firm fixed price. The place of performance will be Kipper Tool Company's facility in Gainesville, Georgia. This contract has been set aside for total small business participation. Kipper Tool...