Purchase Order 47QSHA24P01NF
Award Date 10/20/23
Potential Completion Date 11/19/23
Potential Value $713
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at three hundred fifty-six dollars and forty-one cents ($356.41) by the U.S. General Services Administration Federal Acquisition Service (GSA) to supply twelve (12) micrometer depth gauges. The gauges will have a three-thirty-seconds (3/32) inch minimum rod size, a measuring range of zero to twelve (0-12) inches, and minimum unit graduations of zero-point-zero-zero-one (0.001) inches. Delivery will be made to...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at three hundred fifty-six dollars and forty-one cents ($356.41) by the U.S. General Services Administration Federal Acquisition Service (GSA) to supply twelve (12) micrometer depth gauges. The gauges will have a range of zero to twelve inches, minimum graduations of .001 inch, and ratchet features. Performance will occur in Gainesville, Georgia by December 2, 2023. This total small business set-aside award under an...
- Kipper Tool Company has been awarded a firm fixed price purchase order by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide 12 micrometer depth gauges. The gauges will have a range of 0 to 12 inches, a 2.5-inch base length with a tolerance of 1/8 inch, and a minimum base width of 3/8 inch. They must have a minimum unit graduation of 0.001 inch and feature a ratchet mechanism. Place of performance will be Kipper Tool Company's facility in Gainesville,...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $358 to supply micrometer depth gauges to the General Services Administration (GSA) Federal Acquisition Service. Under the contract, Kipper Tool will provide 12 micrometer depth gauges with a range of 0 to 12 inches and minimum unit graduations of 0.001 inch. Performance will occur in Gainesville, Georgia over a one-month period concluding at the end of October 2023. The solicitation was set aside for total small...
- The General Services Administration (GSA) Federal Acquisition Service awarded Kipper Tool Company a firm fixed-price purchase order valued at one thousand seventy-six dollars and seven cents ($1,076.07) to supply twelve (12) micrometer depth gauges. The gauges will have a three thirty-seconds (3/32) inch minimum rod size, a measuring range from zero to twelve (0-12) inches, and be capable of measurements to within one-thousandth (0.001) of an inch. Delivery is required to Kipper Tool Company's...
- Kipper Tool Company has been awarded a firm fixed price purchase order by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide twelve micrometer depth gauges. The gauges will have a measuring range of zero to twelve inches, a base length of two and a half inches plus or minus one eighth inch, and a measuring surface base width of three eighths to seven eighths inch. Delivery is required between October 19, 2023 and December 14, 2023 to the prime contractor's...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $716 to supply micrometer depth gauges to the General Services Administration (GSA) Federal Acquisition Service. Under the contract, Kipper Tool will provide 12 micrometer depth gauges with a range of 0 to 12 inches, graduated to .001 inch, for use in GSA quality assurance activities. The small business set-aside award was issued using GSA's indefinite delivery vehicle and will be fulfilled by Kipper Tool from its...
- The General Services Administration (GSA) Federal Acquisition Service awarded Kipper Tool Company a firm fixed-price purchase order valued at one thousand seventy-three dollars and seventy-three cents ($1,073.73) to provide twelve (12) micrometer depth gauges. Performance will occur in Gainesville, Georgia from August 24, 2023 through September 23, 2023. The solicitation requested gauges with a three-thirty-seconds (3/32) inch minimum rod size, a measuring range from zero to twelve (0-12)...
- The General Services Administration (GSA) awarded Kipper Tool Company a $356.41 purchase order to provide 12 steel gage depth micrometers with a range of 0 to 12 inches and graduation units of 0.001 inch. The micrometers will have a base length of 2-1/2 inches, base width of 3/8 inch, minimum rod diameter of 3/32 inch, and ratchet stop feature. Performance will occur in Gainesville, Georgia under a firm fixed price contract structured as a total small business set-aside. The short duration...
- Kipper Tool Company has been awarded a purchase order from the General Services Administration (GSA) Federal Acquisition Service to provide twelve steel gage depth micrometers. Valued at three hundred fifty-six dollars, this is a firm fixed price contract with performance in Gainesville, Georgia. The micrometers are to have a base length of 2-1/2 inches, base width of 3/8 inch minimum and 7/8 inch maximum, gage range of 0 to 12 inches with graduations in .001 inch increments, and a 3/32 inch...