Purchase Order 47QSHA24P0114
Award Date 10/15/23
Potential Completion Date 11/14/23
Potential Value $356
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at three hundred fifty-six dollars and forty-one cents ($356.41) by the U.S. General Services Administration (GSA) Federal Acquisition Service to supply twelve (12) micrometer rods. The micrometer rods will have a gauging range of zero to twelve inches, minimum units of graduation of .001 inch, and measuring surfaces of three-eighths to seven-eighths inch in width. Delivery is required to Kipper Tool Company's place of...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at three hundred fifty-six dollars and forty-one cents ($356.41) by the U.S. General Services Administration (GSA) Federal Acquisition Service to supply twelve (12) micrometer rods. The micrometer rods will have a gaging range of zero to twelve inches, minimum units of graduation of .001 inch, and measuring surfaces of three-eighths to seven-eighths inch in width. Delivery is required to Kipper Tool Company's place...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at three hundred fifty-six dollars and forty-one cents ($356.41) by the U.S. General Services Administration Federal Acquisition Service (GSA) to supply twelve (12) rod micrometers with specified features and measuring capabilities. Performance will occur in Gainesville, Georgia by the total small business set-aside deadline of December 2, 2023. The micrometers must gauge between zero and twelve inches with...
- The General Services Administration (GSA) Federal Acquisition Service awarded Kipper Tool Company a firm fixed-price purchase order valued at one thousand seventy-three dollars and seventy-three cents ($1,073.73) to supply twelve (12) micrometer rods. The micrometer rods will have a gaging range of zero to twelve inches, a minimum unit of graduation of .001 inch, and measuring surfaces of three-eighths to seven-eighths inch in width. Place of performance will be in Gainesville, Georgia and the...
- The General Services Administration (GSA) Federal Acquisition Service awarded Kipper Tool Company a firm fixed-price purchase order valued at two thousand one hundred forty-seven dollars and forty-six cents ($2,147.46) to supply twelve (12) micrometer rods. The micrometer rods will have a three thirty-seconds (3/32) inch minimum gauging range from zero to twelve (0-12) inches, a two and one-half (2-1/2) inch base length with a tolerance of plus or minus one-eighth (1/8) inch, and a three-eighths...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at three hundred fifty-six dollars and forty-one cents ($356.41) by the U.S. General Services Administration Federal Acquisition Service (GSA) to supply twelve (12) micrometer depth gauges. The gauges will have a three-thirty-seconds (3/32) inch minimum rod size, a measuring range of zero to twelve (0-12) inches, and minimum unit graduations of zero-point-zero-zero-one (0.001) inches. Delivery will be made to...
- The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a firm fixed price purchase order valued at two thousand eight hundred sixty-nine dollars and fifty-two cents ($2,869.52) to provide twelve (12) micrometer rods. The micrometer rods will have a gauging range of zero to twelve inches, minimum units of graduation of .001 inch, and measuring surfaces of no less than three-eighths inch and no more than seven-eighths inch in width. Place of performance will be...
- The General Services Administration (GSA) Federal Acquisition Service awarded a firm fixed-price purchase order valued at three hundred fifty-six dollars and forty-one cents ($356.41) to Kipper Tool Company of Gainesville, Georgia. The order is for twelve (12) micrometer depth gauges with a three-thirty-seconds (3/32) inch minimum rod size and a measuring range of zero to twelve (0-12) inches, with a graduation of zero-point-zero-zero-one (0.001) inch. Delivery is required between October 20 and...
- The General Services Administration (GSA) awarded Kipper Tool Company a $358.69 firm fixed price purchase order to supply twelve 3/32-inch rod micrometers with a 0-12 inch gauging range, 2.5-inch base length, and ratchet feature. The micrometers will be delivered to Gainesville, Georgia by August 12, 2023 to fulfill the agency's requirements. This total small business set-aside award was issued under an unspecified GSA contract vehicle to support the agency's test and measurement equipment...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at three hundred fifty-six dollars and forty-one cents ($356.41) by the U.S. General Services Administration Federal Acquisition Service (GSA) to supply twelve (12) micrometer depth gauges. The gauges will have a range of zero to twelve inches, minimum graduations of .001 inch, and ratchet features. Performance will occur in Gainesville, Georgia by December 2, 2023. This total small business set-aside award under an...