Purchase Order 47QSHA24P0096
Award Date
10/4/23
Potential Completion Date
6/10/25
Potential Value
Not listed
Federal Agency
Federal Acquisition Service
Awardee
Mid-Continent Machining Inc.
Ultimate Awardee
Not listed
NAICS Category
332216 - Saw Blade and Handtool Manufacturing
PSC Category
5120 - Hand Tools, Nonedged, Nonpowered
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Kansas City, KS 66105, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
Mid-Continent Machining Inc. has been awarded a firm fixed price purchase order valued at one thousand two hundred thirty dollars by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide mechanical pullers. Under this contract, the contractor will deliver three installing plates with a minimum spread range of four and one-eighth inches and a maximum of five and three-fourths inches. Additionally, the contractor will furnish four adapter plates with a minimum...
Mid-Continent Machining Inc. has been awarded a firm fixed price purchase order valued at four hundred forty dollars by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide one mechanical puller in accordance with GSA purchase description 5120-00-288-7713. The puller has a cross block, slide plates, washers, forcing screw nut, securing nuts or bolts, and legs, with a spread range of two and one-eighth inches. Performance will occur at the prime contractor's...
The General Services Administration (GSA) awarded Mid-Continent Machining Inc. a purchase order valued at approximately $562 for mechanical pullers to be delivered by December 2025. Under the firm fixed price contract, Mid-Continent Machining will provide pullers with a spread range of 3-5/32 inches consistent with GSA drawing number 5120-213-0336, with exceptions, to the GSA Federal Acquisition Service. Performance will occur at Mid-Continent Machining's facility in Kansas City, Kansas. The...
Mid-Continent Machining Inc. has been awarded a $1,300 purchase order by the General Services Administration (GSA) Federal Acquisition Service to deliver an adapter tip and pin extractor. The firm fixed price contract runs from June 21, 2023 through September 19, 2023. Per the statement of work, the products will be manufactured according to Boeing Company tool set drawings from 1982 and will be used to support GSA equipment and operations. Mid-Continent Machining will perform the work as...
Mid-Continent Machining Inc. has been awarded a $1,445 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide gaging, rigging per U.S. Army Missile Command drawing number 13025007, revision D dated April 26, 1996 with exceptions. Performance will occur at the prime contractor's facility located in Kansas City, Kansas over a four month period concluding on December 28, 2023. Pricing is firm fixed. No additional subcontractors or context was provided...
The Mid-Continent Machining Inc. has been awarded a $350,000 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide remover, bearing and bushing in accordance with Fairbanks Morse LLC part number 16102999. Performance will take place in Kansas City, KS from October 2023 through January 2024 under a firm fixed price contract. As part of GSA's mission to deliver cost-effective products and services to federal agencies, this award will support the ongoing...
Mid-Continent Machining Inc. has been awarded a firm fixed price purchase order valued at $360,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service. Under this contract, Mid-Continent Machining will provide various types of wrenches conforming to ASME standards, including open end wrenches, adjustable wrenches, double head box wrenches, and crowfoot wrenches. Performance will occur at Mid-Continent Machining's facility in Kansas City, Kansas, between August 3, 2023...
Mid-Continent Machining Inc. has been awarded a $1,830 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide inserters and seals in accordance with Enginetics Corporation drawing number 140008, revision A dated September 11, 1988. The contract has a period of performance from October 19, 2023 through January 17, 2024 and utilizes a firm fixed price contract type. Place of performance will be Mid-Continent Machining's facility in Kansas City, Kansas....
Mid-Continent Machining Inc. has been awarded a $350,000 firm fixed price purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide remover, bearing and bushing in accordance with Fairbanks Morse LLC part number 16102999. Performance will occur at the prime contractor's facility located in Kansas City, Kansas, between November 2023 and February 2024. No set aside designation or subcontractors were identified. GSA utilizes purchase orders and indefinite...
Mid-Continent Machining Inc. has been awarded a $1,830 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide inserters and seals in accordance with Enginetics Corporation drawing number 140008, revision A dated September 11, 1988. The contract has a period of performance from November 17, 2023 through February 15, 2024 and utilizes a firm fixed price contract type. Place of performance will be Mid-Continent Machining's facility in Kansas City, Kansas....