Purchase Order 47QSHA23P1C9T
Award Date
9/29/23
Potential Completion Date
10/29/23
Potential Value
$364
Federal Agency
Federal Acquisition Service
Awardee
Kipper Tool Company
Ultimate Awardee
Not listed
NAICS Category
332216 - Saw Blade and Handtool Manufacturing
PSC Category
5120 - Hand Tools, Nonedged, Nonpowered
Federal Contract Vehicle
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
The General Services Administration (GSA) awarded Kipper Tool Company a purchase order valued at $824.55 for portable electric drill-drivers. Under the firm fixed price contract, Kipper Tool will provide drill-drivers with a 12.0 volt DC voltage, 3/8 inch chuck size, keyless chuck, torque range of 0-200 inch-pounds, variable speed ranges of 0-400 and 0-1500 RPM, minimum overall length of 7.5 inches with a tolerance of 1.0 inch, and weight of 2.4 pounds. Place of performance will be Kipper Tool's...
The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a $347.69 purchase order contract to provide an electric drill-driver. The portable drill specified a direct current voltage of 18 volts, a keyless three-jaw chuck with a half-inch size capacity, and a variable speed rate between zero and 500 revolutions per minute or zero and 1,900 revolutions per minute. Place of performance will be in Gainesville, Georgia and the firm fixed price order period is from...
The General Services Administration awarded Kipper Tool Company a purchase order valued at one thousand forty-three dollars and seven cents for the delivery of portable electric drill-drivers. The firm fixed price contract runs from December 2023 through May 2024 and calls for variable speed, keyless chuck drill-drivers with 0.5-inch chuck capacities to operate on 18-volt direct current at speeds ranging from zero to five hundred revolutions per minute and zero to one thousand nine hundred...
The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a purchase order valued at $347.69 for the delivery of portable electric drill-drivers. The firm fixed price contract has a period of performance from November 8, 2023 through December 8, 2023 and will be performed in Gainesville, Georgia. The drill-drivers specified are direct current powered, with keyless chucks of 0.5 inches, variable speed controls of 0-500 and 0-1900 RPM, and pistol-style grips. This...
Kipper Tool Company has been awarded a $109,000 firm fixed price purchase order by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide portable electric drills. The drills will have a 3/8 inch chuck size, keyed chuck, be designed for straight drive, and have a variable speed range of zero to 1,200 revolutions per minute with a tolerance of plus or minus 15 percent. Additional specifications include a three-prong grounded plug connector, 120 volt alternating...
Kipper Tool Company has been awarded a firm fixed price purchase order valued at $245,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide fifteen electric drill-drivers with specified technical characteristics. Performance will occur in Gainesville, Georgia over a one-month period concluding in late October 2023. The solicitation sought portable electric drill-drivers for use by GSA with between two and seven-and-a-half inch overall lengths, half-inch...
The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a firm fixed price purchase order valued at $347.69 to provide portable electric drill-drivers. The contract has a period of performance from August 4, 2023 through September 3, 2023 and will be performed in Gainesville, Georgia. This total small business set-aside contract supports GSA in procuring drill-drivers with specifications including a keyless three-jaw chuck, variable two-speed motor rated...
The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a $695.38 purchase order contract to provide portable electric drill-drivers. The drills have keyless chucks, variable two-speed motors up to 500 and 1,900 RPM, and pistol-style grips. Performance will occur in Gainesville, Georgia over a period of one month concluding in mid-November. The award is set aside for total small businesses. Kipper Tool Company will serve as the prime contractor to supply the...
Kipper Tool Company has been awarded a $152,410 firm fixed price purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide portable electric drills. The drills will feature variable speed control from 5.5 to 10.5 inches in length, operate on alternating current at 5.5 amps and 60 Hertz, and include a chuck key, chuck key holder and side handle as accessory components. Place of performance will be Kipper Tool's facility in Gainesville, Georgia, with work...
The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a $347.69 purchase order to supply an electric drill-driver. The portable drill has a keyless chuck, variable two-speed transmission, and pistol-style grip handle. Performance will occur in Gainesville, Georgia over a one-month period concluding in mid-August. As a total small business set-aside, the award supports the GSA's mandate to allocate federal procurement dollars to small businesses. Kipper...