Purchase Order 47QSHA23P19CA
Award Date 9/4/23
Potential Completion Date 10/4/23
Potential Value $1.1K
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at one thousand ninety-five dollars and thirty-eight cents ($1,095.38) by the U.S. General Services Administration (GSA) Federal Acquisition Service to supply machined straightedges. Under the terms of the contract, Kipper Tool Company will manufacture and deliver machined steel straightedges measuring forty-eight inches in length, two and a half inches in width, and three-eighths of an inch in thickness. The...
- The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a purchase order valued at approximately $259,000 to provide straightedge tools measuring 36 inches in length, 2 inches in width, and 1/4 inch in thickness made of steel. Performance will occur in Gainesville, Georgia over a period of approximately one month concluding in early November 2023. The firm fixed price contract has been set aside for total small business participation. As GSA's acquisition arm,...
- The General Services Administration Federal Acquisition Service awarded a purchase order contract valued at approximately $258,000 to Kipper Tool Company of Gainesville, Georgia. The firm fixed price contract is for the delivery of straightedge tools measuring 36 inches in overall length, 2 inches in width, and 1/4 inch in thickness, constructed of steel. Performance will occur in Gainesville and is required to be completed by May 2024. The award was set aside for total small business...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide thirty-five steel blades, a case, and locking device. The blades will measure three inches in length and be supplied within a tolerance of negative 0.0625 to positive 0.125 inches. Delivery is required to Kipper Tool Company's facility in Gainesville, Georgia, between September 16 and October 16, 2023. This total small...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration Federal Acquisition Service to provide thirty-five steel blades, a case, and locking device. The blades are to be 3 inches in length with a tolerance of plus or minus 0.125 inches. Delivery is to take place in Gainesville, Georgia by November 14, 2023. This total small business set-aside contract supports GSA procurement needs by providing precision measurement...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to supply machinist's rules. Under the contract, Kipper Tool will provide flexible steel rules measuring 12 inches in length, 1/2 inch in width, and 1/64 inch in thickness, graduated in 1/100, 1/64, 1/32, and 1/10 inch increments. The rules will be chrome-plated with a natural ground or dull satin finish. Place of performance...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide precision measurement gages. Under the contract, Kipper Tool will deliver 35 straight blade gages with 3-inch blades having a tolerance of plus or minus 0.125 inches to GSA's facility in Gainesville, Georgia. The gages will be used to check clearance in narrow slots and between fitted parts. Performance will occur...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $25,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to supply machinist's rules. Under the contract, Kipper Tool will provide flexible steel rules measuring 12 inches in length, 1/2 inch in width, and 1/64 inch in thickness, graduated in 1/100, 1/64, 1/32, and 1/10 inch increments. The rules will have a chrome or dull satin finish and be manufactured in Gainesville, Georgia, with...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $50,000 by the U.S. General Services Administration Federal Acquisition Service to provide thirty-five straight blade gages with a tolerance of plus or minus 0.125 inches for use in checking clearances. Performance will occur in Gainesville, Georgia over an approximately six-month period concluding in May 2024. The contract has a total small business set-aside designation. This award supports GSA procurement of...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at twenty-five thousand dollars by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide machinist's rules. Under the contract, Kipper Tool Company will deliver flexible steel rules measuring twelve inches in length, half an inch in width, and one sixty-fourth of an inch in thickness, graduated in one-hundredths, sixty-fourths, thirty-seconds, and tenths of an inch. The rules will have a...