Purchase Order 47QSHA23P16PM
Award Date 8/14/23
Potential Completion Date 9/13/23
Potential Value $363
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The General Services Administration (GSA) awarded Kipper Tool Company a $579 purchase order contract to supply brush, wire, rotary, and wheel accessories. The firm fixed price order is for circular wire brushes with a 3/4 inch outside diameter, 0.003 inch wire diameter, and low carbon steel fill material. The brushes will have a maximum speed rating of 15,000 RPM and will be mounted on 1/8 inch diameter stems that are 1.5 inches long. Place of performance will be Kipper Tool Company's facility...
- The General Services Administration (GSA) awarded Kipper Tool Company a $634.50 purchase order contract to deliver brush, wire, rotary, and wheel products in support of the agency's mission requirements. Specifically, the firm fixed price contract calls for the delivery of crimped wire rotary brushes with an outside diameter of 1.25 inches, wire diameter of 0.008 inches, and arbor shaft diameter of 0.25 inches. The products must meet specifications outlined in Commercial Item Description...
- The General Services Administration (GSA) awarded Kipper Tool Company a $1,269 firm fixed price purchase order to deliver brush, wire, rotary wheels per specification CID A-A-2514A. The products will be used to support GSA programs and delivered to a facility in Gainesville, Georgia between October 6th and November 5th, 2023. This total small business set-aside award was made using the GSA Federal Acquisition Service government-wide acquisition contract vehicle. No major subcontractors were...
- The General Services Administration (GSA) awarded a $308,000 firm fixed price purchase order to Kipper Tool Company of Gainesville, Georgia. The order is for brush, wire, rotary end items conforming to Commercial Item Description A-A-2513A dated May 16, 2002. Key requirements include stainless steel brushes with 1-inch outside diameters, 0.005-inch wire diameters, 0.25-inch crimped arbor diameters, and 0.75 to 1.125-inch wire trim lengths. Place of performance is Kipper Tool's Gainesville...
- The General Services Administration (GSA) awarded Kipper Tool Company a $500 firm fixed price purchase order to provide brush, wire, and rotary cup supplies in support of the agency's needs. The order calls for twisted tuft brush fills with a 2.75 inch outside diameter, 1 inch trim length, 0.02 inch wire diameter, and female threaded arbor. All items must meet ANSI B165.1-2010 standards and have a maximum safe operating speed of 14,000 RPM. Place of performance will be Kipper Tool Company's...
- The General Services Administration (GSA) awarded Kipper Tool Company a firm fixed-price purchase order valued at $36,360 for brush, wire, rotary cup assemblies meeting specification CID A-A-2512A. Performance will occur in Gainesville, Georgia by December 1, 2023. The solicitation requested type III high carbon tempered steel rotary cups 4 inches in outside diameter with 0.0204 inch diameter twisted tuft wire and a trim length between 1.375 to 1.875 inches. This total small business set-aside...
- Kipper Tool Company has been awarded a $114,690 firm fixed price purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide brush, wire, rotary wheels. The products will include outside diameters of 7 inches, wire diameters of 0.014 inches, face widths of 1.25 inches, and arbor hole diameters of 1 inch. Performance will take place in Gainesville, Georgia from November 2023 through April 2024. This total small business set-aside award is being issued...
- Kipper Tool Company has been awarded a $317,250 firm fixed price purchase order by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide brush, wire, rotary wheels. The products to be delivered under the contract include Type III high carbon tempered steel rotary wheels with outside diameters of 1.25 inches, wire diameters of 0.008 inches, and arbor shaft diameters of 0.25 inches. The wheels will have crimped wire fills and safe maximum free speeds of 8,000...
- The General Services Administration (GSA) awarded Kipper Tool Company a $208,100 firm fixed price purchase order to provide brush, wire, and rotary cup assemblies in support of the agency's procurement programs. The contract has a total small business set aside designation. Kipper Tool will deliver the requested products, including 2-3/4 inch outside diameter threaded arbors made of type 2 stainless steel, from its Gainesville, Georgia facility between September and October 2023. The award is...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $38,070 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide brush, wire, rotary wheels per the specifications outlined in Commercial Item Description A-A-2514A. Performance will take place in Gainesville, Georgia between September 21, 2023 and October 21, 2023. This total small business set-aside contract supports GSA's mission to deliver cost-effective products and services to...