Purchase Order 47QSHA23P11P8
Award Date 7/13/23
Potential Completion Date 9/26/23
Potential Value $41
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Not Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Troy, MI 48084, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- Wright Tool Company, LLC was awarded a firm fixed-price purchase order valued at $40,900 by the General Services Administration (GSA) Federal Acquisition Service to provide abrasive wheels measuring 3 inches in diameter, 0.125 inches thick with a 0.375-inch arbor and 46 grit rating for use at speeds up to 25,000 revolutions per minute. Place of performance will be the prime contractor's facility located in Troy, Michigan. Delivery of the wheels is required between July 13, 2023 and September 26,...
- Wright Tool Company, LLC has been awarded a $5,100 contract under the General Services Administration's (GSA) Federal Acquisition Service RC2 Blanket Purchase Agreement vehicle to supply abrasive wheels to the agency. The fixed-price contract with economic price adjustment calls for the delivery of aluminum oxide abrasive wheels with a 24 grit size, 27 depressed center, 0.875 inch hole diameter, 0.25 inch thickness, and 4.5 inch width to an address in Warren, Michigan by November 5, 2023. As the...
- This federal contract award is for abrasive wheels to Wright Tool Company, LLC from the General Services Administration (GSA) Federal Acquisition Service. The contract calls for aluminum oxide screening grit wheels that are 4.5 inches in diameter, 0.875 inches in hole diameter, and 0.25 inches in thickness. The wheels will be used for abrasive applications. The $98,250 fixed-price contract was awarded under the GSA's RC2 Blanket Purchase Agreement vehicle. Wright Tool Company will manufacture...
- This federal contract award is for abrasive wheels to Wright Tool Company LLC from the General Services Administration (GSA) Federal Acquisition Service. The contract calls for aluminum oxide screening grit wheels that are 4.5 inches in diameter, 0.875 inches in hole diameter, and 0.25 inches in thickness. The wheels will be used for abrasive applications. The $1.31 million contract was awarded under the GSA RC2 Blanket Purchase Agreement vehicle. Wright Tool Company LLC will perform the work in...
- Wright Tool Company, LLC was awarded a $65,500 fixed-price contract with economic price adjustment under the General Services Administration's (GSA) Federal Acquisition Service RC2 Blanket Purchase Agreement vehicle. The contract calls for the delivery of abrasive aluminum oxide wheels with a 24 grit size, 27 depressed center, 0.875 inch hole diameter, 0.25 inch thickness, and 4.5 inch width to a location in Warren, Michigan. Performance will take place between July 7-12, 2023. The prime...
- This federal contract award is for abrasive wheels to Wright Tool Company, LLC from the General Services Administration (GSA) Federal Acquisition Service. The contract calls for aluminum oxide abrasive wheels that are 4.5 inches in diameter, 0.875 inches in hole diameter, and 0.25 inches in thickness. These wheels will be used for abrasive applications. The $65,500 fixed-price contract was awarded under the GSA RC2 Blanket Purchase Agreement vehicle. As a BPA call, this contract leverages the...
- Wright Tool Company, LLC was awarded a fixed-price contract valued at thirty thousand six hundred dollars under the General Services Administration's (GSA) Federal Acquisition Service's RC2 Blanket Purchase Agreement vehicle. The contract calls for the delivery of abrasive grinding wheels measuring seven inches in diameter and between nine thirty-seven hundredths and twelve and a half hundredths of an inch in thickness, conforming to specifications set by the American National Standards...
- This federal contract award is for abrasive wheels to Wright Tool Company, LLC from the General Services Administration (GSA) Federal Acquisition Service. The contract calls for aluminum oxide abrasive wheels that are 4.5 inches in diameter, 0.875 inches in hole diameter, and 0.25 inches in thickness. These wheels will be used for abrasive applications. The $6.55 million contract was awarded under the GSA RC2 Blanket Purchase Agreement vehicle. As a BPA call, this contract leverages the existing...
- The General Services Administration (GSA) awarded a $104.51 firm fixed price purchase order to Wright Tool Company, LLC for wheel abrasives. Under the contract, Wright Tool will provide one 0.25-inch diameter by 2-inch long spindle mounted diamond grinding wheel with a 40 grit designation for spindle grinding applications. The place of performance is Wright Tool's Troy, Michigan facility. The period of performance is from November 28, 2023 through February 11, 2024. No subcontractors or set...
- The Government Services Administration (GSA) awarded a $27,800 firm-fixed-price call against the Wright Tool Company LLC's Multiple Award Schedule contract for abrasive wheels. Wright Tool Company LLC, located in Warren, Michigan, will provide wheel abrasives in support of the GSA Federal Acquisition Service's tools program. Performance will take place in Warren, Michigan over a one week period concluding on August 1, 2023. The contract was awarded without any socioeconomic set-asides...