Purchase Order 47QSHA23P10BH
Award Date 6/23/23
Potential Completion Date 7/23/23
Potential Value $890
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The General Services Administration (GSA) awarded Kipper Tool Company a firm fixed price purchase order valued at $889.99 to provide outside micrometers with a measurement range of 9 to 12 inches and graduations of 0.001 inch. The micrometers will feature steel anvils and spindles with flat faces, a knurled ring lock nut, and ratchet stop thimble finished in chrome plate. Place of performance will be Kipper Tool Company's facility in Gainesville, Georgia, with work to be completed by July 23,...
- Kipper Tool Company has been awarded a firm fixed price purchase order by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide outside micrometers with a measurement range of zero to one inch and a graduation of 0.0001 inch. Performance will take place in Gainesville, Georgia over a period of five months concluding in mid-November 2023. The solicitation sought carbide anvil and spindle micrometers with a satin finish, ratchet stop, and knurled ring lock nut. This...
- Kipper Tool Company has been awarded a $1,444 firm fixed price purchase order by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide outside micrometers. The micrometers will have an enameled frame, interchangeable anvils, and a gauging range of 20 to 24 inches with a graduation of 0.001 inch. Delivery is required between November 2023 and April 2024 to GSA in Gainesville, Georgia. This total small business set-aside contract supports GSA's mission to provide...
- Kipper Tool Company has been awarded a $151,000 firm fixed price purchase order by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide outside micrometers. The micrometers will include plain screw thread heads with a measurement range of 0 to 0.875 inches and graduations of 0.001 inches. Steel anvils and pointed spindles will be used, and the instruments will have partial protective cases. Performance will occur in Gainesville, Georgia over a period of...
- The General Services Administration (GSA) awarded a $356.40 firm fixed price purchase order to Kipper Tool Company of Gainesville, Georgia. The order is for the delivery of micrometers with a gage range of zero to 12 inches, graduation units of .001 inch, and steel construction. Delivery is required between December 2023 and May 2024. The award was set aside for total small business concerns. As a component of GSA's Federal Acquisition Service, this purchase will support the agency's provision...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at one hundred fifty dollars and ninety-one cents ($150.91) by the U.S. General Services Administration (GSA) Federal Acquisition Service to supply outside micrometers. The micrometers will have a flat anvil and spindle made of steel with a knurled ring thimble, friction stop, and 0.0001 inch graduations over a five to six inch range. Performance will occur in Gainesville, Georgia by September 27, 2023. This total...
- The General Services Administration Federal Acquisition Service awarded a firm fixed price purchase order valued at $299.41 to Kipper Tool Company of Gainesville, Georgia. The contract is for the delivery of outside micrometer calipers with a maximum measurement of five inches, to measure between zero and one inch with graduations of .0001 inch and a maximum flexure of .0015 inch. The products will be delivered between August 28 and September 27, 2023. This total small business set-aside award...
- Kipper Tool Company has been awarded a $217.41 firm fixed price purchase order by the General Services Administration (GSA) Federal Acquisition Service to supply micrometers. The micrometers will measure between 0.2 to 1.2 inches with a graduation of 0.001 inches and an accuracy of 0.0002 inches. They will be made of steel with a chrome coating and include a case, friction thimble, and locking screw. Place of performance will be in Gainesville, Georgia and the period of performance is from...
- The General Services Administration (GSA) awarded Kipper Tool Company a $358.69 firm fixed price purchase order to supply twelve 3/32-inch rod micrometers with a 0-12 inch gauging range, 2.5-inch base length, and ratchet feature. The micrometers will be delivered to Gainesville, Georgia by August 12, 2023 to fulfill the agency's requirements. This total small business set-aside award was issued under an unspecified GSA contract vehicle to support the agency's test and measurement equipment...
- The General Services Administration (GSA) awarded a $299.41 purchase order to Kipper Tool Company of Gainesville, Georgia. The firm fixed price order is for outside micrometer calipers with a maximum measurement of five inches and a measurement range from zero to one inch, to an accuracy of 0.0001 inches. Performance will take place in Gainesville from August 4th to September 3rd, 2023. The award was set aside for total small businesses. As part of GSA's mandate to acquire supplies for federal...