Delivery Order SPE8E821D0002-SPE8E822F0026
Award Date 10/6/21
Potential Completion Date 10/27/21
Potential Value $10K
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Full and Open Competition
Major Defense Program
Not listed Pricing Type
Fixed Price with Economic Price Adjustment
Place of Performance
Lakewood, NJ 08701, USA
Solicitation Procedures
Negotiated Proposal / Quote
Number Of Offers Received
Not listed
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- This is a fixed-price federal contract award for a pneumatic-powered, portable scaler with specific technical requirements, including a 3mm needle diameter, 8 lb maximum weight, 14 inch maximum length, 5/8 inch maximum stroke, and operating parameters of 4,000 BPM no-load speed and 85-90 PSI air pressure. The contract was awarded to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan, through the RC2 Blanket Purchase Agreement (BPA) with the Federal...
- The General Services Administration's Federal Acquisition Service awarded a $1,771.98 fixed-price contract with economic price adjustment to Giga, Inc. for the supply of pneumatic needle scalers on November 14, 2025. The contract calls for delivery of needle scaling equipment with specific operational parameters, including a maximum overall length of 7.7 inches, 90 PSI maximum operating air pressure, and an impact rate of 7,000 beats per minute, with possible needle configurations of 18 each 3MM...
- The General Services Administration (GSA) Federal Acquisition Service awarded a $2,193.40 firm fixed price purchase order to Kaufman Company, Inc. doing business as Kaufman Co Inc. for pneumatic scalers. The scalers have an overall length of 7.7 inches, maximum operating air pressure of 90 pounds per square inch, operating air consumption of 6 cubic feet per minute, stroke length of 0.5 inches, and impact rate of 7,000 blows per minute. Possible needle configurations include 18 each. Performance...
- This federal contract award is for a pneumatic needle scaler with specific technical requirements, including an overall length of 7.7 inches, maximum operating air pressure of 90 PSI, operating air consumption of 6 CFM, stroke length of 0.5 inch, and an impact rate of 7000 BPM. The contract was awarded to Giga, Inc., a for-profit small business organization based in Macon, Georgia, under the RC2 Blanket Purchase Agreement (BPA) with the Federal Acquisition Service, a civilian agency. The...
- The General Services Administration (GSA) awarded Kipper Tool Company a $3,995.94 firm fixed price purchase order to provide portable pneumatic scalers. The contract has a period of performance from July 13, 2023 through August 12, 2023 for the delivery of needle scalers to be used at locations in Gainesville, Georgia. The scalers must have a 3mm needle diameter, weigh approximately 8 pounds, extend up to 14 inches with a maximum 5/8 inch stroke and tolerate deviations of no more than 1/16th...
- This federal contract award is for an AIR NEEDLE SCALER with a 12,000 BPM in-line capability, awarded to W.W. Grainger, Inc.'s Government Sales Division (Grainger) by the Federal Acquisition Service (FAS), a civilian agency within the General Services Administration (GSA). The fixed-price contract with economic price adjustment has a ceiling value of $6,539.44 and an ultimate completion date of April 15, 2025. The contract was awarded under Grainger's existing Multiple Award Schedule (MAS)...
- The General Services Administration (GSA) awarded a $1,714.28 delivery order to Wright Tool Company, LLC under its Multiple Award Schedule contract. The order is for pneumatic scalers to be delivered to Troy, Michigan by November 5, 2023. Specifically, the scalers have an overall length of 7.7 inches and operate at a maximum air pressure of 90 PSI, consuming 6 CFM of air with a 0.5 inch stroke length. The scalers will have a body grip handle, lever throttle, and impact rate of 7,000 blows per...
- The Naval Sea Systems Command (NAVSEA) awarded a firm fixed-price purchase order valued at $21,992.50 to Nidaz LLC, a women-owned small disadvantaged business based in West Mifflin, Pennsylvania, for the procurement of a JEX-28 NITTO KOHKI pneumatic needle scaler. This contract was awarded on August 1, 2025, with an ultimate completion date of August 18, 2025, and is designated as a total small business set-aside. The needle scaler is a specialized hand tool used for surface preparation and...
- Wright Tool Company, LLC, located in Warren, Michigan, has been awarded a contract call under the RC2 Blanket Purchase Agreement (BPA) by the Federal Acquisition Service to supply pneumatic needle scalers. The awarded item is a pneumatic scaler with an overall length of 7.7 inches, operating at a maximum air pressure of 90 PSI with an air consumption rate of 6 CFM, a 0.5-inch stroke length, and an impact rate of 7,000 BPM, available in 18 possible needle configurations. This is a fixed price...
- The General Services Administration (GSA) Federal Acquisition Service awarded a firm fixed price purchase order valued at three thousand two hundred ninety dollars and ten cents ($3,290.10) to Kaufman Company, Inc., doing business as Kaufman Co Inc. located in Norwood, Massachusetts. The contract is for the delivery of pneumatic scalers with an overall length of seven and seven-tenths inches and a maximum operating air pressure of ninety pounds per square inch. Key features of the scalers...
- SPE8E821D0002Indefinite Delivery Contract
- SPE8E821D0002-SPE8E822F0026Delivery Order
8508593985 ! VACU-NEEDLE SCALER
Posted 10/6/21
Mod # | Description | ReasonForModification | Federal Obligation | Date |
|---|---|---|---|---|
| Not listed | Not listed | $10.2k | 10/6/21 |