Delivery Order SPE4A622D5259-SPE4A622F394J
Award Date 9/16/22
Potential Completion Date 3/10/23
Potential Value Not listed
Federal Agency
Awardee
Ultimate Awardee
Not listed PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
HUNTINGTN BCH, CA 92649, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
Not listed
Legislative Mandate
Walsh Healy Act
National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The Defense Logistics Agency Aviation awarded a delivery order to Meg Technologies, Inc. for $8,948.16 under a firm fixed price contract. The order is for screw, close tolerance items in support of DLA Aviation programs. Performance will occur at Meg Technologies' facility in Huntington Beach, California, with completion scheduled for March 2, 2023. No set-aside provisions were applied to this order for screw products. As the Defense Logistics Agency Aviation supports the acquisition and life...
- The Defense Logistics Agency Aviation awarded Meg Technologies, Inc. a $0.00 firm fixed price delivery order for 8508596810 screws under an unspecified multiple award contract vehicle. Per the award notice, Meg Technologies will provide close tolerance screws in support of DLA Aviation requirements from its place of performance in Huntington Beach, California by March 7, 2022. No set-aside provisions were applied to this order. As the DLA Aviation stockpile, manages, and distributes aviation...
- The Defense Logistics Agency Aviation awarded Meg Technologies, Inc. a $560 fixed-price delivery order with economic price adjustment for screw, close tolerance products. The place of performance is Huntington Beach, California and the completion date is May 25, 2021. The award date was September 17, 2020. No set-aside designation was used for this requirement to supply close tolerance screws to the Defense Logistics Agency Aviation in support of their stock replenishment and equipment...
- The Defense Logistics Agency Aviation awarded a firm fixed-price delivery order valued at approximately $1,328 to Meg Technologies, Inc. for screw, close tolerances. Meg Technologies, Inc. will perform as the prime contractor under the contract to supply the agreed-upon screws to DLA Aviation. The place of performance will be Meg Technologies' facility located in Huntington Beach, California. The period of performance spans from July 2023 through August 2024. No subcontractors or set-aside...
- This delivery order was awarded by the Defense Logistics Agency Aviation to Meg Technologies, Inc. on January 13, 2022, with a completion date of July 7, 2022. The firm fixed price order is for close tolerance screws with a potential value of $0.00. No set-aside designation was used. As the Defense Logistics Agency Aviation supports procurement and supply chain management for the Department of Defense, this order is likely providing standard hardware to support the maintenance and repair of...
- This delivery order from the Defense Logistics Agency Aviation awards Meg Technologies, Inc. a firm fixed price contract valued at one thousand eighteen dollars and twenty-four cents ($1,018.24) to provide eight hundred fifty thousand nine hundred seventy-four close tolerance screws by July 15, 2024. As no set-aside designation was used, this appears to be an open market procurement supporting the DLA Aviation's supply chain management and fulfillment of parts and equipment for the United States...
- This delivery order, awarded by the Defense Logistics Agency Aviation to Meg Technologies, Inc., is for screw, close tolerance items with a potential value of $1,099.26. The contract has a completion date of October 18, 2023 and was awarded on December 22, 2022. It utilizes a fixed price with economic price adjustment pricing structure and has no set-aside designation. The place of performance is Huntington Beach, California. As the Defense Logistics Agency Aviation supports procurement and...
- The Defense Logistics Agency Aviation awarded a firm fixed-price purchase order valued at approximately $3,400 to Meg Technologies, Inc. for the delivery of screw, close tolerance PR line items. Meg Technologies, Inc. will perform as the prime contractor under the contract. Work will be conducted out of their Huntington Beach, California facility. The base period of performance spans from June 2022 through September 2023 for the procurement of the specified hardware in support of DLA Aviation...
- The Defense Logistics Agency Aviation awarded a delivery order to Meg Technologies, Inc. for five hundred seventy-eight dollars under an unspecified contract vehicle. The order is for 8509492138 screws, close tolerance, with delivery required by August 23, 2023. Pricing is fixed price with economic price adjustment. Performance will occur in Huntington Beach, California. No set-aside designation was used for this procurement of standard hardware in support of the Defense Logistics Agency...
- The Defense Logistics Agency Aviation awarded a purchase order valued at $7,560 to Meg Technologies, Inc. for the delivery of close tolerance screws. Meg Technologies, Inc. will perform as the prime contractor under the firm fixed price contract. Work will be conducted out of Meg Technologies' Huntington Beach, California facility and must be completed by September 28, 2023. No subcontractors or set aside designations were indicated. This order falls under the Defense Logistics Agency Aviation's...
- SPE4A622D5259Indefinite Delivery Contract
- SPE4A622D5259-SPE4A622F394JDelivery Order
The Defense Logistics Agency Aviation awarded a delivery order contract valued at $0.00 to Meg Technologies, Inc. of Huntington Beach, California. The contract is for the delivery of 8509400764 screw, close tolerance items with a period of performance through March 10, 2023. The pricing structure is firm fixed price. No set-aside designation was applied to this award made to Meg Technologies, Inc., which will fulfill the order for close tolerance screws to support DLA Aviation procurement programs.
Generated 1/2/24, 8:58 PM
Mod # | Description | ReasonForModification | Federal Obligation | Date |
|---|---|---|---|---|
| P00001 | Terminate for Convenience | ($1k) | 12/8/22 | |
| Not listed | Not listed | $1.1k | 9/16/22 |