Delivery Order N6893619D0044-N6893619F0657
Award Date 8/29/19
Potential Completion Date 10/16/19
Potential Value $4.8K
Federal Agency
Awardee
Ultimate Awardee
Not listed PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Full and Open Competition after exclusion of sources
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Riverton, UT 84095, USA
Solicitation Procedures
Negotiated Proposal / Quote
Number Of Offers Received
Not listed
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The Department of the Navy Naval Air Systems Command Naval Air Warfare Center awarded a $4,400 firm fixed price purchase order to Goengineer LLC on July 5, 2022 for 3D printer servicing. The work is to be performed in Midvale, Utah through June 24, 2023. No set-aside designation was used for this award to the for-profit limited liability company Goengineer LLC. The Naval Air Warfare Center frequently requires 3D printing services to support research, development, and testing of naval aviation...
- The Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center awarded a $10,496 purchase order to 3D Systems, Inc. for 3D printer services. 3D Systems, Inc. is a subsidiary of 3D Systems Corporation, which will perform the services from its facility in Rock Hill, South Carolina. The firm fixed price order runs from August 15, 2023 through November 30, 2023 and provides 3D printing capabilities to support NAVAIR's research, development, testing and evaluation programs. No...
- The Department of the Navy Naval Air Systems Command Naval Air Warfare Center awarded Centeva LLC a $0.00 firm fixed price delivery order under contract number 10442. Performance will take place in Riverton, Utah with a completion date of May 19, 2022. The award was made on March 10, 2022 without a set-aside designation. As the Naval Air Warfare Center researches, develops, acquires and supports naval air technologies and weapons systems, this order is presumed to involve delivery of unspecified...
- The Department of the Navy Naval Sea Systems Command awarded a $89,102 firm fixed price purchase order to Govsmart, Inc. for a Stratasys F370CR 3D printer system and accessories. The solicitation sought the printer and associated start-up kit, build trays, extrusion heads, cleaning system, and FDM Nylon-CF10 material to improve the Naval Undersea Warfare Center Division's capacity for additive manufacturing of prototypes, test fits and end-use parts. Installation, training, GrabCAD Print and...
- The U.S. Naval Sea Systems Command (NAVSEA) awarded a $108,270 firm-fixed-price purchase order to 3D Systems, Inc. for a 3-year service plan on a ProX 800 - 3D Elite 3D printer. This sole-source contract will provide maintenance services for the printer located at the Naval Undersea Warfare Center Division Newport (NUWCDIVNPT) in Rhode Island. The contract period is from January 1, 2025 through December 31, 2027. There was no set-aside designation for this unrestricted procurement, as 3D Systems...
- The Department of the Navy Naval Education and Training Command awarded a $104,905 firm fixed price purchase order to Acrea 3D LLC of Monterey, California. The contract is for the acquisition of an Acrea 3D printer capable of printing at resolutions of 8 micrometers or smaller horizontally and 0.25 micrometers or smaller vertically, to support the Naval Postgraduate School. The solicitation was a sole source notice of intent under Federal Acquisition Regulation 6.302-1 for only one responsible...
- The Department of the Navy Naval Education and Training Command awarded a $25,414.56 firm fixed price delivery order to New TECH Solutions, Inc. for an ULTIMAKER S7 3D printer. The contract was issued under Solutions for Enterprise Wide Procurement V, a governmentwide acquisition contract vehicle administered by the General Services Administration. Place of performance will be in Monterey, California. The period of performance is from August 28, 2023 through September 28, 2023. No set aside...
- The Department of the Navy Naval Air Systems Command awarded a firm fixed price purchase order to 3D Systems, Inc., a manufacturer of 3D printers, print materials, and related software and services. The $186,355.88 contract is for the repair and annual preventative maintenance of 3D printers. The contract has a completion date of February 24, 2022. 3D Systems, as the prime contractor, has previously provided 3D printing equipment, materials, software, and associated maintenance and support...
- Westwind Computer Products, Inc. was awarded a $10,419.30 firm fixed-price delivery order against the Multiple Award Schedule contract vehicle to provide HEWD28C printers to the Department of the Navy Naval Air Systems Command Naval Air Warfare Center in Albuquerque, New Mexico. The delivery order has a period of performance through July 30, 2021 and was awarded on June 22, 2021 without a set-aside designation. The Naval Air Warfare Center is a research, development, test, and evaluation...
- This federal contract award was issued by the Naval Information Warfare Systems Command (NAVWAR), a defense agency, to Goengineer LLC, a small business prime contractor. The $115,750.00 fixed-price purchase order is for a Fortus 380MC 3D printer to be used at the contractor's facility in Salt Lake City, Utah. The award has a completion date of September 10, 2016. Goengineer LLC is a limited liability company that specializes in providing advanced manufacturing technologies and services,...