Delivery Order GS27F5061C-FA930208FE060

The General Services Administration (GSA) Federal Acquisition Service awarded a $1,059 firm fixed price purchase order to Wright Tool Company, LLC for the delivery of one mobile tool cabinet. Under the contract, Wright Tool Company will provide a 26-11/16 inch wide, 31-11/32 inch high, 19-23/32 inch deep tool cabinet with five drawers and a total load capacity of 1,100 pounds. The cabinet drawers can each hold up to 100 pounds and the cabinet will have integral key locking casters that are 5...

Coordinated Defense Supply Systems, Inc. has been awarded a $32,548.80 firm fixed price purchase order by the General Services Administration Federal Acquisition Service to provide four-drawer, steel and enamel-coated mobile tool cabinets. The cabinets will measure approximately 40 inches in length, 19-1/2 inches in height, and 19-3/4 inches in width, with a 1-inch tolerance on all dimensions. Each cabinet will include four drawers and an integral locking device requiring a key. Delivery of...

<p>This is a delivery order under Contract W9098S15D0016 awarded by the TACOM Life Cycle Management Command, a Defense agency, to Deco Tool Supply CO. The order is for a CABINET 'C', DRAWER 10 with a firm fixed price of $788,107.60 and a completion date of February 1, 2018. The contract does not have a set-aside designation. As the prime contractor, Deco Tool Supply CO. will be responsible for delivering the requested cabinet.</p>

This is a firm fixed-price delivery order issued by the General Services Administration's Federal Acquisition Service to Idsc Holdings LLC, doing business as Snap-On Industrial, a division of Snap-On Incorporated. The order is for the supply of a mobile tool cabinet, including a top chest, four drawers, and a locking device. The cabinet is 40.03 inches long, 19.44 inches high, and 19.81 inches wide, with a red enamel finish. The total ceiling value of the order is $3,042.90, with a completion...

The General Services Administration awarded a $1,886.85 firm fixed price blanket purchase agreement call contract to Snap-On Industrial, a division of Idsc Holdings, LLC, to deliver one mobile tool cabinet. The cabinet specifications include a depth of 24 inches, height of 39 inches, width of 36 inches, seven drawers providing 4,700 square inches of storage capacity, and a 2,400 pound load capacity. Additional features include six-inch by two-inch casters and a single bank of drawers painted red...

The General Services Administration (GSA) awarded a firm fixed price purchase order valued at $3,497 to Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC doing business as Snap-On Industrial, for the delivery of one mobile tool cabinet. The cabinet specifications include a depth of 29-1/8 inches, height of 44-1/4 inches, width of 35-5/8 inches, eight drawers, a 3,600 pound load capacity, an integral key lock, six 2-inch casters with two rigid and two swivel including brake,...

This firm-fixed-price delivery order was awarded to IDSC Holdings LLC, doing business as Snap-On Industrial, a subsidiary of Snap-On Incorporated. The $1,273.25 contract is for the supply of a mobile tool cabinet, National Stock Number: CABINET,TOOL,MOBILE SNAP-ON INC P/N: KRL756, under the General Services Administration's Hardware Superstore (FSS-51-V) Multiple Award Schedule contract. The place of performance is Wisconsin, USA. This award does not have a set-aside designation. Snap-On...

This is a fixed-price delivery order contract valued at $1,516.04, awarded by the U.S. Department of the Army to Stanley Black &amp; Decker, Inc. The contract is for the provision of storage cabinets, specifically the &quot;CABINET,STORAGE ONE SOURCE IS STANLEY VI ***** CS-5434A 340 340STDR5434ZN VG&quot; model. The contract does not have a set-aside designation, indicating it was competitively awarded. Stanley Black &amp; Decker, Inc. is a major manufacturer of tools, hardware, and storage...

The General Services Administration (GSA) Federal Acquisition Service awarded a firm fixed-price purchase order contract to Independent Design, Inc., doing business as Champion Tool Storage, for the delivery of a mobile tool cabinet. The cabinet has specifications including an overall depth of 26 inches, height of 42 inches, width of 32 inches, and a dimensional tolerance of 1/4 inch. It features two drawers with a capacity of 70 pounds each and a maximum load capacity of 1,000 pounds. This...

Coordinated Defense Supply Systems, Inc. has been awarded a purchase order by the General Services Administration Federal Acquisition Service for the delivery of a chest, top, mobile tool cabinet. The cabinet specified is approximately 40 inches in length, 19-1/2 inches in height, and 19-3/4 inches in width, with a 1-inch dimensional tolerance. It includes 4 drawers, an integral locking device requiring a key, and is constructed of steel with an enamel coating in red primer. This $1,627.44...