Definitive Contract W912HZ21C0055
Award Date
9/23/21
Potential Completion Date
2/28/22
Potential Value
$750K
Federal Agency
Engineer Research and Development Center
Awardee
Millebot, Inc.
Ultimate Awardee
Not listed
PSC Category
6640 - Laboratory Equipment And Supplies
Federal Contract Vehicle
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
NO FORT MYERS, FL 33917, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
This is a Firm Fixed Price contract awarded by the U.S. Army Corps of Engineers to Mx3D B.V. for a Wire Arc Additive Manufacturing (WAAM) system to be provided to the Engineer Research and Development Center (ERDC) Geotechnical and Structures Laboratory (GSL) by May 31, 2024. The contract has a ceiling value of $417,018.00 and was awarded on August 29, 2023 through full and open competition without a set-aside. The WAAM system requirements include a print volume of 2200mm x 1400mm x 1700mm, an...
This firm-fixed-price contract was awarded to Big Metal Additive LLC, a self-certified small disadvantaged business, by the U.S. Army Corps of Engineers. The $78,696.51 contract calls for the delivery of 1 connector arm and 2 sector gears using wire arc additive manufacturing (WAAM) for the Corps' Engineer Research and Development Center (ERDC) Geotechnical and Structures Laboratory (GSL). This award is part of a larger 5-year, $750,000 blanket purchase agreement (BPA) held by Big Metal Additive...
Caterpillar Inc. was awarded a $571,000 firm fixed price definitive contract by the Department of the Army Corps of Engineers Engineer Research and Development Center to deliver a deployable 3D printer system. The contract is in response to a sole source special notice seeking an equivalent system to the military's Automated Construction of Expeditionary Structures 2.1 printer to maintain consistency for materials testing and ensure integration with the agency's established additive construction...
The U.S. Army Corps of Engineers awarded a $122,210.00 firm fixed-price purchase order contract to Goengineer LLC, a small business contractor, for the delivery of a 3D printer and post-processing unit. The contract, which has a completion date of September 18, 2020, was awarded in support of the Corps of Engineers' requirement for a PolyJet 3D printer with a minimum build size of 8" x 8" x 6" and micron resolution of 16 microns to enable rapid prototyping of engineering and...
This is a $1,800,000.00 firm fixed price definitive contract awarded by the U.S. Army Engineer Research and Development Center (ERDC) to Hartech Group LLC, a woman-owned small disadvantaged business located in Tampa, Florida. The contract is for the final delivery of MASTERPRINT DEPLOYABLE equipment and supports the Warfighter Engineering Branch of the ERDC's Construction Engineering Research Laboratory (CERL). The original solicitation was a Commercial Solutions Opening (CSO) seeking...
This is a firm fixed price purchase order awarded by the U.S. Army Corps of Engineers Research and Development Center (ERDC) to Mx3D B.V., a company based in Amsterdam, Netherlands. The contract is for the provision of an MX3D 3D Scanner and Thermal Camera, in support of an ongoing Military Engineering research and development program focused on new methodologies for manufacturing large infrastructure components using additive manufacturing. The total ceiling value of the contract is $124,212.00...
This is a $41,615 firm-fixed-price purchase order awarded by the U.S. Army Corps of Engineers to 3Dpotter, Inc., a small business manufacturer, for the supply of a 3D PotterBot Scara v4 + Auger System. The award is the result of a sole-source procurement under FAR 13.106-1(b)(1) to support a research project, designated DOER 25-01, focused on automated dredge sediment placement for phytoremediation and upland site restoration. The PotterBot system must meet specific performance requirements,...
The U.S. Department of the Army Materiel Command Research Development and Engineering Command awarded a $212,500.00 firm-fixed-price purchase order to Makergear LLC, a manufacturer of desktop 3D printers, for an Ultra One 3D printer. This award is related to a previously awarded $1.38 million firm-fixed-price purchase order to Makergear for 75 Ultra One 3D printers with custom doors and lifting straps to support additive manufacturing activities at the U.S. Army Combat Capabilities Development...
This federal contract award to Formlabs Inc., a manufacturer of 3D printing technology, was issued by the U.S. Army Corps of Engineers' Engineer Research and Development Center (ERDC). The $24,113.31 firm fixed-price purchase order is for a 3D printer for the ERDC's EL. U433D30 program. The contract has an ultimate completion date of August 25, 2023. Formlabs, based in Somerville, Massachusetts, is a global leader in professional 3D printing. They have received numerous prime contracts and...
This is a $282,000 firm fixed price purchase order awarded by the U.S. Army Materiel Command Research, Development and Engineering Command to TriMech Solutions, LLC, a limited liability company, for the procurement of a hybrid additive manufacturing machine, battery, supplies, shipping, handling, installation, and training. The original solicitation was a brand name-only competition seeking a commercial item that could produce 3D electronics with high accuracy and conductivity for high-g and...