BPA Call GS06F9CONS-GSMPNF6T3364

This is a federal contract awarded by the General Services Administration (GSA) to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan. The contract is for the delivery of a torque multiplier tool, with a maximum overall length of 19 inches, height of 7-43/64 inches, and width of 13 inches. The tool has a 3/4-inch square drive on both ends and a rated torque capacity of 12,000 foot-pounds, with a gear ratio of 10.7:1 and a minimum hardness rating of 38...

The U.S. General Services Administration's Federal Acquisition Service awarded a $2,680.00 firm fixed-price purchase order to Lyev, LLC (doing business as MRO Tool Supply) on September 18, 2025, for the delivery of a torque wrench multiplier. The equipment specified is a 30-inch overall length multiplier with an output capacity of 4,000 foot-pounds and 5,423 Newton-meters, featuring an audible square drive signal. The unit includes a 1-inch internal square drive on the first end and a 1-1/2-inch...

The Federal Acquisition Service awarded a purchase order to Lyev, LLC (operating as MRO Tool Supply) on January 26, 2026, for the supply of a torque multiplier meeting specific engineering specifications. The unit features a 25-inch overall length with a 3/4-inch square drive first end and 1-inch external gear second end, a 4-to-1 gear ratio, and a 2,000 foot-pound maximum torque capacity. Constructed of steel with chrome coating, the geared design is intended to support mechanical and...

<p>This is a firm fixed-price purchase order issued by the TACOM Life Cycle Management Command, a defense agency, to Hydratight Sweeney Products Co. for the supply of a MULTIPLIER, TORQUE WRENCH. The contract has a ceiling value of $1,692.00 and an ultimate completion date of July 24, 2005. The contract was awarded on July 7, 2005 and does not have a small business set-aside designation.</p>

This is a firm-fixed-price purchase order awarded by the Bureau of Naval Personnel, a defense agency, to the prime contractor Consolidated Devices, Inc. The contract is for a torque wrench multiplier with specific technical requirements, including an overall length of 19 inches, a maximum rated torque capacity of 12,000 foot-pounds, and other detailed specifications. The contract has a ceiling value of $3,891.10 and a completion date of November 12, 2005. Consolidated Devices, Inc. is a...

This is a fixed-price contract with economic price adjustment awarded by the Federal Acquisition Service (FAS), a civilian agency, to Wright Tool Company, LLC, a for-profit limited liability company located in Warren, Michigan. The contract is a Blanket Purchase Agreement (BPA) call under the RC2 Blanket Purchase Agreement, which allows federal agencies to procure tools and supplies on an as-needed basis. The contract is for the delivery of a manual torque multiplier with specific technical...

This firm fixed price delivery order for $683 was awarded by GSA Federal Acquisition Service to Snap-On Industrial, a division of Idsc Holdings LLC, for the delivery of a torque wrench. The wrench has an overall length of 20 inches, input capacity of 200 foot-pounds, and output capacity of 1,200 foot-pounds, with square drive sizes of 1/2 inch and 3/4 inch on its first and second ends respectively. It has a gear ratio of 6.3:1 and torque ratio of 6:1. Place of performance will be Kenosha, WI....

The General Services Administration awarded a $605.62 delivery order to Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC doing business as Snap-On Industrial, under the company's Multiple Award Schedule contract with GSA. The order is for the delivery of a torque wrench with an overall length of 20 inches, input capacity of 200 foot-pounds, output capacity of 1,200 foot-pounds, and square drive sizes of 1/2 inch and 3/4 inch. The wrench has a gear ratio of 6.3:1 and torque...

This federal contract award, identified as GS06Q16GVAM022|47QSHA18F111F, was granted to Wright Tool Company, LLC, a prime contractor based in Warren, Michigan. The contract is for the delivery of a Torque Wrench Multiplier with a maximum torque capacity of 3,200 foot-pounds, a 0.50-inch square drive tang input, and a 1.0-inch square external drive tang output. The multiplier features a directional clutch, 360-degree continuous rotation in both directions, and an angle of turn protractor. This...

This contract award is for the delivery of a MULTIPLIER, TORQUE product to the GSA Federal Acquisition Service. The device has a maximum rated torque capacity of 12,000 foot-pounds and an 11:1 gear ratio. The prime contractor is Wright Tool Company, LLC, a for-profit limited liability company located in Warren, Michigan that specializes in supplying tools, hardware, and industrial products to the federal government. This award is a BPA (Blanket Purchase Agreement) call under the RC2 Blanket...